StarTech.com P2DD46A2-KVM-SWITCH Manual

StarTech.com Skifte P2DD46A2-KVM-SWITCH

Læs nedenfor 📖 manual på dansk for StarTech.com P2DD46A2-KVM-SWITCH (1 sider) i kategorien Skifte. Denne guide var nyttig for 4 personer og blev bedømt med 4.5 stjerner i gennemsnit af 2 brugere

Side 1/1
Hotkey Command Guide
To view manuals, FAQs, videos, drivers, downloads, technical drawings, and more, visit www.startech.com/support.
Hotkey Command Revision: May 11, 2023
Dual Monitor KVM Switch - DisplayPort - 4K 60Hz
Product IDs
P2DD46A2-KVM-SWITCH
P4DD46A2-KVM-SWITCH
Product Information
For the latest software, manuals, product information, technical specications, and
declarations of conformance, please visit:
www.StarTech.com/P2DD46A2-KVM-SWITCH
www.StarTech.com/P4DD46A2-KVM-SWITCH
Hotkey Commands
Hotkey commands are keystroke sequences that initiate computer/device functions
and can be used to initiate KVM Switch functions. A hotkey command sequence must
be initiated by the HK_LCode (HotKey Leading Code), followed by 1-2 additional
keystrokes. Successful hotkey command inputs result in a high-pitch beep. Unsuccessful
hotkey command inputs result in a low-pitched beep.
Notes:
- All keystroke combinations must be entered in rapid succession.
- Press and release the indicated keys, unless otherwise specied.
HK_LCode
Option 1.1
Scr Lck Scr Lck +
Option 1.2
To change the HK_LCode:
HK_LCode + H + Esc, Caps, or F12
Alternatively, press and hold the front for , until 2 beeps Host Selection Button PC2
are emitted, then press the desired leading hotkey of Scr Lck, ESC, Caps, or F12
Hotkey Command Function
HK_LCode 1 ~ 2 +
or
HK_LCode F1 ~ F2 +
Select PC 1 or PC 2.
HK_LCode + W
Disable the binding between PC (USB/Video) and Audio
when switching between PC 1 or PC 2.
Allows switching of PC Ports USB and Video functions,
while Audio does not switch
HK_LCode + Q
Enable the binding of PC (USB/Video) and Audio
switching.
Audio will switch with the PC Ports USB and Video
functions.
Enabled by default.
HK_LCode F5 ~ F6 +
Audio Unbound: Selects only the audio and mic source
between PC 1 or PC 2, does not switch USB and Video
Audio Bound: Select PC 1 or PC 2 and their respective
USB/Video/Audio Ports
HK_LCode + Up Arrow
Key
or
HK_LCode + Down
Arrow Key
Select the next/previous PC Port.
If Audio is unbound, the audio will not switch
HK_LCode + B Disable the Beep that indicates HotKey Command
Inputs.
HK_LCode + S Enable Autoscan.
Press any key to stop the Autoscan function.
HK_LCode + H + “x”
Dene the Autoscan time delay.
“x” = 1 - 10sec, 2 - 20sec, 3 - 30sec, 4 - 40sec, 5
- 50sec, 6 - 60sec, 7 - 70sec, 8 - 80sec, 9 - 90sec, 0 -
100sec


Produkt Specifikationer

Mærke: StarTech.com
Kategori: Skifte
Model: P2DD46A2-KVM-SWITCH

Har du brug for hjælp?

Hvis du har brug for hjælp til StarTech.com P2DD46A2-KVM-SWITCH stil et spørgsmål nedenfor, og andre brugere vil svare dig




Skifte StarTech.com Manualer

Skifte Manualer

Nyeste Skifte Manualer

Vimar

Vimar 20468.1 Manual

15 December 2024
Vimar

Vimar 20518 Manual

15 December 2024
Vimar

Vimar 20469 Manual

15 December 2024
Vimar

Vimar 20465.B Manual

15 December 2024
Vimar

Vimar 20468.B Manual

15 December 2024
Vimar

Vimar 20448.N Manual

15 December 2024
Vimar

Vimar 20448.B Manual

15 December 2024
Vimar

Vimar 20465 Manual

15 December 2024
Vimar

Vimar 20469.B Manual

15 December 2024
Vimar

Vimar R20515.B Manual

15 December 2024