StarTech.com P4AD122-KVM-SWITCH Manual

StarTech.com Skifte P4AD122-KVM-SWITCH

Læs nedenfor 📖 manual på dansk for StarTech.com P4AD122-KVM-SWITCH (1 sider) i kategorien Skifte. Denne guide var nyttig for 16 personer og blev bedømt med 4.5 stjerner i gennemsnit af 2 brugere

Side 1/1
Hotkey Command Guide
To view manuals, FAQs, videos, drivers, downloads, technical drawings, and more, visit www.startech.com/support.
Hotkey Command Revision: November 15, 2023
4-Port 4K 60Hz DisplayPort KVM Switch - USB 5Gbps Hub
Product IDs
P4AD122-KVM-SWITCH
Product Information
For the latest software, manuals, product information, technical specications, and
declarations of conformance, please visit:
www.StarTech.com/P4AD122-KVM-SWITCH
Hotkey Commands
Hotkey commands are keystroke sequences that initiate computer/device functions.
Hotkey commands can be used to initiate KVM Switch functions. A hotkey command
sequence must be initiated by the HK_LCode, followed by 1-2 additional keystrokes.
Successful hotkey command inputs result in a high-pitched beep. Unsuccessful hotkey
command inputs result in a low-pitched beep.
Notes:
- All keystroke combinations must be entered in rapid succession.
- Press and release the indicated keys, unless otherwise specied.
- Numbers entered during the hotkey sequence cannot be entered using a number pad
HK_LCode
Option 1
Scr Lck + Scr Lck
Option 2
Left Ctrl + Left Ctrl
Option 3
Left Shift (Hold) + Num Lck + Num Lck + Release Left Shift
Hotkey Command Function
HK_LCode 1 ~ 4 + Select PC 1 ~ PC 4
HK_LCode F1 +
or
Press Port Selection
Buttons 3 & 4
Start Auto Scan
HK_LCode F2 +
Start Manual Scan -- Manually switch back and forth
between PCs
Press the or key to select the Up Arrow Down Arrow
next/previous PC
HK_LCode F3 +
or
Press Port Selection
Buttons 1 & 2
Adjust Scan Rate -- KVM Switch generates one to four
beeps that indicate the duration of the scan time:
One beep = 3 seconds
Two beeps = 8 seconds
Three beeps = 15 seconds
Four beeps = 30 seconds
HK_LCode + F5
Enable/Disable the binding of PC and Audio Switching.
Bound by default forcing PC and Audio to switch
together
Unbound = PC Audio stops following the selected PC
when switching (1 beep)
Bound = PC Audio matches the selected PC (2 beeps)
HK_LCode + A
Force Audio to follow selected PC
If audio was unbound, this command will rebind
audio to switch with the PC ports
Left Shift (Hold) +
Num Lck + Num Lck
+ Release Shift + Left
Ctrl
Enable or disable hotkey functionality
Enabled by default


Produkt Specifikationer

Mærke: StarTech.com
Kategori: Skifte
Model: P4AD122-KVM-SWITCH

Har du brug for hjælp?

Hvis du har brug for hjælp til StarTech.com P4AD122-KVM-SWITCH stil et spørgsmål nedenfor, og andre brugere vil svare dig




Skifte StarTech.com Manualer

Skifte Manualer

Nyeste Skifte Manualer

Hamlet

Hamlet HN08GTX Manual

30 Januar 2025
HELGI

HELGI HLG0414 Manual

30 Januar 2025
LogiLink

LogiLink UA0085 Manual

29 Januar 2025
Powerfix

Powerfix PSSS 2 A1 Manual

14 Januar 2025
D-Link

D-Link DES-1024D Manual

13 Januar 2025
TRENDnet

TRENDnet TEG-S5g Manual

13 Januar 2025
INOGENI

INOGENI CAM230 Manual

13 Januar 2025