StarTech.com ST1030USBM Manual

StarTech.com USB HUB ST1030USBM

Læs nedenfor 📖 manual på dansk for StarTech.com ST1030USBM (4 sider) i kategorien USB HUB. Denne guide var nyttig for 5 personer og blev bedømt med 4.5 stjerner i gennemsnit af 2 brugere

Download PDF

Side 1/4

Quick-Start Guide

To view manuals, FAQs, videos, drivers, downloads, technical drawings, and more, visit www.startech.com/support.

Manual Revision: September 10, 2024 6:17 PM

Product ID: HB30A10AME, ST1030USBM

Component Function

12-Wire Terminal Block • Used to connect an external DC Power Source

(7~24V DC Input) to the .Hub

2Screw Locks (x 10)

• Used to securely lock a to the USB Device

USB-A Port Hub on the .

• Center to center 19 Screw Lock Dimensions:

mm, thread size 4 - 40.

3Power LED • : Indicates that the Hub is receiving Green

power.

4USB-B Host Port

• Used to connect a to the .Host Computer Hub

• Center to center 24 Screw Lock Dimensions:

mm, thread size 4 - 40.

5USB-A Ports (x 10)

• Used to connect ( x 10) to the USB Devices

Hub.

• Used to charge connected .USB-A Devices

• USB-A Ports support surge and 15KV ESD

(Electrostatic Discharge) Protection.

10-Port Industrial USB 3.0 (5 Gbps) Hub | USB 3.2 Gen 1 to 10x USB-A | ESD & Surge Protection

Requirements

For the latest requirements, please visit or

www.startech.com/HB30A10AME www.

startech.com/ST1030USBM

• Phillips Head Screwdriver

• Writing Utensil

• Level

• Mounting Screws (x 2)

Installation

Notes: It is recommended to use an external (+7 - 24V DC)DC Power Source

connected to the to ensure sucient power/current is 2-Wire Terminal Block

delivered to each on the . USB-A Port Hub

Powering the Hub Using the Universal Power Adapter

1. Connect the to the and to a Universal Power Adapter Terminal Block AC

Electrical Outlet.

Note: HB30A10AME ST1030USBMUniversal power adapter included with ; does not

include power adapter ( ).sold separately

2. Connect a (the end will depend on USB Port you are USB-B to USB Cable

connecting to) to the and to a USB port on the .USB-B Host Port Host Computer

3. The should detect the and Host Computer’s Operating System Hub

automatically install it.

4. Connect your to the (x 10) on the . USB Devices USB-A Ports Hub

Powering the Hub Using the 2-Wire Terminal Block

1. Remove the from the .Terminal Block Connector Housing Hub’s Casing

2. Using a small screwdriver (Phillips or Flat Head), loosen the screws on the Terminal

Block Connectors.

3. Connect the and from your (+7 - 24V DC) Power Ground Wires DC Power Source

to the proper , the terminals are marked on theTerminal Block Connectors Hub’s

Casing.

4 5

* Actual product may vary from photos

Produkt Specifikationer

Mærke:	StarTech.com
Kategori:	USB HUB
Model:	ST1030USBM
Bredde:	56 mm
Dybde:	198 mm
Højde:	31 mm
Vægt:	357 g
Brugervejledning:	Ja
Produktfarve:	Sort
Pakkevægt:	600 g
Pakkedybde:	246 mm
Pakkebredde:	169 mm
Pakkehøjde:	57 mm
Opbevaringstemperatur (T-T):	-20 - 85 °C
Relativ luftfugtighed ved drift (H-H):	5 - 95 %
Antal USB 3.2 Gen 1 (3.1 Gen 1) type-A-porte:	10
Driftstemperatur (T-T):	0 - 70 °C
Husmateriale:	Stål
Kabler inkluderet:	USB
Certificering:	RoHS, CE, FCC, TAA, REACH
LED-indikatorer:	Strøm
Kabellængde:	2.032 m
Harmoniseret systemkode (HS):	84719000
Indgangsspænding:	7 - 24 V
Hovedkassen højde (udvendigt):	338 mm
Hovedkassens længde (udvendigt):	526 mm
Hovedkassens bredde (udvendigt):	444 mm
Værtsgrænseflade:	USB 3.2 Gen 1 (3.1 Gen 1) Type-B
Produkter pr. hovedkasse (udvendigt):	25 stk
Gennemsnitstid mellem fejl (MTBF):	119388 t
Dataoverførselshastighed:	5000 Mbit/s
Klemrække port:	Ja
Klemrække inkluderet:	Ja
Porte, antal:	10
Beskyttelse ved overspænding:	Ja
Hub-grænseflader:	USB 3.2 Gen 1 (3.1 Gen 1) Type-A
Chipsæt:	Genesys Logic - GL3520
DIN skinnesæt inkluderet:	Ja