SuperTooth Disco 3 Manual


Læs nedenfor 📖 manual på dansk for SuperTooth Disco 3 (8 sider) i kategorien Højttaler. Denne guide var nyttig for 14 personer og blev bedømt med 4.5 stjerner i gennemsnit af 2 brugere

Side 1/8
*A2DP (Advanced Audio Distribution Prole) is a technology enabling to
stream stereo sound from an audio source (phone, pc, laptop, tablet, MP3
player) to a stereo speaker or headset via Bluetooth. To do so both devices
must support this prole.
Using the SUPERTOOTH DISCO 3 with your
Bluetooth A2DP phone / device
Important : The DISCO 3 needs to be “paired” with your
Bluetooth A2DP phone / device rst. Please refer to “Pairing
the SUPERTOOTH DISCO 3 with your Bluetooth A2DP phone /
device” section.
Reconnecting the SUPERTOOTH DISCO 3 with a Bluetooth
A2DP phone / device already paired
When you turn it on, the DISCO 3 reconnects automatically
with the latest paired device. When you leave the Bluetooth
operating range, with the DISCO 3 turned ON, it disconnects.
When you come back into the Bluetooth operating range,
press the Play / Pause Button for 1 second to reconnect the (3)
latest paired device. The DISCO 3 beeps twice.
Streaming music from a Bluetooth A2DP phone / device
1. Go to your device music player and play a track by pressing
“Play” or the Play / Pause Button for 1 second. If the (3)
DISCO 3 is connected, the music will be heard directly in the
speaker. See your device manual if needed.
2. Audio is now on the DISCO 3. The Play / Pause Indicator (3)
turns steady white, indicating that the device is connected
and streaming music via the DISCO 3.
3. When it is connected, you can control the music using the
buttons of the DISCO 3. Please refer to “SUPERTOOTH
DISCO 3 Button Functions” section.
Using the SUPERTOOTH DISCO 3 with a non
Bluetooth A2DP Mp3 Player
You can connect directly an Mp3 player via the Stereo Line
Input situated at the back of the DISCO 3.(9)
Connecting re tl di c y a non Bluetooth A2DP Mp3 player with
the SUPERTOOTH DISCO 3
1. Plug one end of the supplied audio cable into the Stereo
Line Input and the other end into the output of your (9)
music player.
2. Press “Play” on your Mp3 player to stream music directly via
the DISCO 3.
3. Non Bluetooth devices won’t support Play / Pause / Previous
/ Next commands from the DISCO 3. Please use the buttons
of your Mp3 player directly.
The Bluetoot word mark and logos are registered trademarks owned by Bluetooth SIG, Inc. and any use of such
marks by Eur CB is under license. Other trademarks and trade names are those of their respective owners.o-
The aptX® software is copyright CSR plc or its group companies. All rights reserved. The aptX® mark and the aptX
logo are trademarks of CSR plc or one of its group companies and may be registered in one or more jurisdictions. DISCO 3
USER GUIDE
The SUPERTOOTH DISCO 3 is a portable, wireless stereo
speaker featuring an avant-garde design and compact
footprint.
Users can stream music wirelessly from any cell phone,
tablet, computer, laptop or Mp3 player supporting
Bluetooth A2DP.
The SUPERTOOTH DISCO 3 kicks out 12 watts RMS audio
power, with two high eciency speakers on the front
and a bass reex system situated at the back of the unit.
The integrated rechargeable battery ensures 3 to 4
hours of non-stop, maximum-volume music, and up to
15 hours of moderately played melodies.
The SUPERTOOTH DISCO 3 comes with a 3.5 mm stereo
jack cable for devices that do not support Bluetooth
A2DP.
Charging
1. Connect the USB Cable to the DC 5V USB Input found at (7)
the back of the DISCO 3 then connect the other end of the
USB Cable to your Computer or USB power supply.
2. The Charge Indicator is steady red while charging. (8)
Charging is complete when the Charge indicator goes (8)
green.
Turning the SUPERTOOTH DISCO 3 On and O
Power On : Press and hold the On / O Button for 2 seconds. (6)
A power on beep is heard in the speaker, Play / Pause Indicator
(3) will blink for 2 seconds.
Note 1 : At rst time use, when you turn it on, the DISCO 3 goes
to pairing mode automatically (ready to be paired with your
phone / device).
Note 2 : If you are not playing music, the DISCO 3 goes to
standby mode automatically after a few seconds. To check it is
turned on, press any button. Play / Pause Indicator will ash.(3)
Power O : Press and hold the On / O Button for 3 seconds.(6)
A power o beep is heard in the speaker.
Pairing the SUPERTOOTH DISCO 3 with your
Bluetooth A2DP phone / device.
Pair the DISCO 3 to your phone / device to create the link or
audio connection between the two. Pairing should be done at
rst connection to a phone / device.
Important : Make sure that your phone / device supports A2DP*
(Advanced Audio Distribution Prole) before proceeding.
1. If the Disco 3 is o, press the On / O button for 2 seconds, (6)
to switch it on.
2. If this is the rst time you are turning on the Disco 3, the Play /
Pause (3) button blinks red fast. This indicates that the DISCO
3 is ready to be pair.
If the Play / Pause button is not fast blinking red, press and (3)
hold the Play / Pause button for 3 seconds (until the unit (3)
beeps twice). The Play / Pause button should blink red (3)
now and the Disco 3 is ready to pair.
3. While the DISCO 3 is in pairing mode, access the Bluetooth
menu of your device. Turn on its Bluetooth function then
execute a Bluetooth search to nd the DISCO 3. (See your
device manual).
4. When your device displays the list of Bluetooth devices, select
ST DISCO3.
5. If your device asks for the password / pin code, enter 0000 and
press OK.
6. The Disco 3 beeps twice. It is ready to use with your device.
Federal Communications Commission (FCC) Statement
Industry Canada (IC) Statement
15.21
You are cautioned that changes or modications not expressly approved by the part responsible
for compliance could void the user’s authority to ope te the equipme .ra nt
15.105(b)
This equipment has been tested and found to comply with the limits for a Class B digital device,
pursuant to part 15 of the FCC/IC rules. These limits are designed to provide reasonable
protection against harmful interference in a residential installation. This equipmen tes, t genera
uses and can radiate radio frequency energy and, if not installed and used in a ordance with cc
the instructions, may rmful interference to radio communications. However, there is no cause ha
guarantee that interference will not occur in a particular installation. If this equipment does cause
harmful interference to radio or television reception, which can be determined by turning the
equipment o and on, the user is encouraged to try to correct the interference by one or more of
the following measures :
- Reorient or relocate the receiving antenna.
- Increase the sepa tion between the equipment and receiver.ra
- Connect the equipment into an outlet on a circuit dierent from that to which the receiver is
connected.
- Consult the dealer or an experienced radio/TV technician for help.
This device complies with part 15 of the FCC rules and Industry Canada licence-exempt RSS standard(s)
Ope tion is subject to the following two conditions :ra
1) This device may not cause interference and
2) This devi e must a ept a y i , including i e th t m y cause undesic cc n nterference nterferenc a a red
ope tion of the device.ra
FCC/IC RF Radiation Exposure Statement :
This equipment complies with FCC/IC radiation exposure limits set forth for an uncontrolled
environment. End users must follow the specic operating instructions for satisfying RF exposure
compliance. This transmitter must not be co-located or operating in conjunction with any other
antenna or transmitter.
Correct Disposal of This Product
(Waste Electrical & Electronic Equipment)
(A Eur European countr rate collection pplicable in the opean Union and other ies with sepa
systems). This marking shown on the product or its literature, indicates that it should not
be disposed with other household wastes at the end of its working life. To prevent
possible harm to the environment or human health from uncontrolled waste disposal,
please sepa te this fr t wast recy responsibly t romotra om other ypes of es and cle it o p e the
sustainable r aterial resourceseuse of m . Household users should contact either the retailer where
they purchased this product, or their local government oce, for details of whe e and h w they r o
can take this item for environmentally safe recycling.
Business users should contact their supplier and check the terms and conditions of the purchase
contract. This product should not be mixed with other commercial wastes for disposal.
This product has an embedded, non-replaceable battery, do not attempt to open the product or
remove the battery as this may ry and damage the product. Please contact the local cause inju
recycling facility for removal of the battery. The embedded, non-replac atter gned eable b y is desi
to last the life time of the product.
Hereby, EURO COMMUNICATION EQUIPEMENTS, represented by MARCHANT, CEO, declares Xavier
that the MODEL BTD3, is in compliance with the essential requirements SUPERTOOTH DISCO 3,
and other relevant provisions of Directive 1999/5/EC of the European Parliamen of the t and
Council of 9 March 1999 on radio equipment and telecommunications terminal equipment and
the mutual recognition of their conformity.
To download the user guide in
full version please go to
www.supertooth.net
For the whole declaration please visit : http://www.supertooth.net/download
Euro Communication Equipements SAS
Route de Foix D117
11500 NEBIAS (FRANCE)
Pairing code
0 0 0 0
Pairing code
0 0 0 0
Pantone 286 CFoldingCutting


Produkt Specifikationer

Mærke: SuperTooth
Kategori: Højttaler
Model: Disco 3

Har du brug for hjælp?

Hvis du har brug for hjælp til SuperTooth Disco 3 stil et spørgsmål nedenfor, og andre brugere vil svare dig




Højttaler SuperTooth Manualer

Højttaler Manualer

Nyeste Højttaler Manualer

Kramer

Kramer Tavor 8-Sub Manual

21 November 2024
Kramer

Kramer Galil 6-AW Manual

21 November 2024
Extron

Extron SM 28 Manual

20 November 2024
Extron

Extron SF 3CT LP Manual

20 November 2024
QSC

QSC HPR181W Manual

20 November 2024
JBL

JBL Cinema Sound CS46 Manual

20 November 2024