SuperTooth Disco II Manual

SuperTooth Højttaler Disco II

Læs nedenfor 📖 manual på dansk for SuperTooth Disco II (4 sider) i kategorien Højttaler. Denne guide var nyttig for 11 personer og blev bedømt med 4.5 stjerner i gennemsnit af 2 brugere

Download PDF
Side 1/4
(*) A2DP (Advanced Audio Distribution Prole) is a technology enabling
to stream stereo sound from an audio source (phone, PC, laptop, tablet,
Mp3 player) to a stereo speaker or headset via Bluetooth. To do so both
devices must support this prole.
Using the SUPERTOOTH DISCO 2 with your
Bluetooth A2DP phone / device
Important : The DISCO 2 needs to be “paired” with your
Bluetooth A2DP phone / device rst. Please refer to “Pairing
the SUPERTOOTH DISCO 2 with your Bluetooth A2DP phone /
device” section.
Reconnecting the SUPERTOOTH DISCO 2 with a Bluetooth
A2DP phone / device already paired
When you turn it on, the DISCO 2 reconnects automatically
with the latest paired device. When you leave the Bluetooth
operating range, with the DISCO 2 turned ON, it disconnects.
When you come back into the Bluetooth operating range,
press the Play / Pause Button (3) for 1 second to reconnect the
latest paired device. The DISCO 2 beeps twice.
Streaming music from a Bluetooth A2DP phone / device
1. Go to your phone music player and play a track by pressing
“Play” or the Play / Pause Button (3) for 1 second. If the
DISCO 2 is connected, the music will be heard directly in the
speaker. See your phone manual if needed.
2. Audio is now on the DISCO 2. All the buttons switch on
steady white, indicating that the phone is connected and
streaming music via the DISCO 2.
3. When it is connected, you can control the music using the
buttons of the DISCO 2. Please refer to “SUPERTOOTH
DISCO 2 Button Functions” section.
Using the SUPERTOOTH DISCO 2 with a non
Bluetooth A2DP Mp3 Player
You can connect directly an Mp3 player via the Stereo Line
Input (9) situated at the back of the DISCO 2.
Connecting directly a non Bluetooth A2DP Mp3 player with
the SUPERTOOTH DISCO 2
1. Plug one end of the supplied audio cable into the Stereo
Line Input (9) and the other end into the output of your
music player.
2. Press “Play” on your Mp3 player to stream music directly via
the DISCO 2.
3. Non Bluetooth devices won’t support Play / Pause / Previous
/ Next commands from the DISCO 2. Please use the buttons
of your Mp3 player directly.
The Bluetooth® word mark and logos are registered trademarks owned by Bluetooth SIG, Inc. and any use of such
marks by Euro-CB is under license. Other trademarks and trade names are those of their respective owners.
The aptX® software is copyright CSR plc or its group companies. All rights reserved. The aptX® mark and the aptX
logo are trademarks of CSR plc or one of its group companies and may be registered in one or more jurisdictions. DISCO 2
USER GUIDE
The SUPERTOOTH DISCO 2 is a portable, wireless stereo
speaker featuring an avant-garde design and compact
footprint.
Users can stream music wirelessly from any cell phone,
tablet, computer, laptop or Mp3 player supporting
Bluetooth A2DP.
The SUPERTOOTH DISCO 2 kicks out 16 watts RMS audio
power, with two speakers on the front and a high
eciency bass reex system situated at the back of the
unit.
The integrated rechargeable battery ensures 3 to 4
hours of non-stop, maximum-volume music, and up to
10 hours of moderately played melodies.
The SUPERTOOTH DISCO 2 comes with a 3.5 mm stereo
jack cable for devices that do not support Bluetooth
A2DP.
Charging
1. Connect the charger’s plug into the Charge Port (7) of the
DISCO 2. Connect the charger to an external power source.
2. The Charge Indicator (8) is steady red while charging.
Charging is complete when the Charge Indicator (8) goes
green.
Turning the SUPERTOOTH DISCO 2 On and O
Power On : Press and hold the On / O Button (6) for 2 seconds.
A power on beep is heard in the speaker, all the buttons switch
on and o automatically.
Note 1 : At rst time use, when you turn it on, the DISCO 2 goes
to pairing mode automatically (ready to be paired with your
phone / device).
Note 2 : If you are not playing music, the DISCO 2 goes to
standby mode automatically after a few seconds and all the
buttons switch o. To check it is turned on, press any button. All
the buttons switch on and o instantaneously.
Power O : Press and hold the On / O Button (6) for 3 seconds.
A power o beep is heard in the speaker.
Pairing the SUPERTOOTH DISCO 2 with your
Bluetooth A2DP phone / device
Pair the DISCO 2 with your phone / device to create the link or
audio connection between the two. Pairing should be done at
rst connection with a phone / device.
Important : Make sure that your phone / device supports
Bluetooth A2DP* (Advanced Audio Distribution Prole) before
proceeding.
Note : Any other device previously paired with the DISCO 2
must be turned o, or its Bluetooth must be disabled before
proceeding.
1. The DISCO 2 must be turned OFF. Press and hold the On / O
Button (6) for 6 seconds until the Play / Pause Button (3)
blinks red fast. The DISCO 2 is ready to be paired.
2. While the DISCO 2 is in pairing mode, access the Bluetooth
menu of your phone. Turn on its Bluetooth function then
execute a Bluetooth search to nd the DISCO 2. (See your
phone manual).
3. When your phone displays the list of Bluetooth devices, select
ST DISCO 2.
4. If your phone asks for a password / pin code, enter 0000 and
press OK.
5. The DISCO 2 beeps twice. It is ready to use with your phone.
Federal Communications Commission (FCC) Statement
Industry Canada (IC) Statement
15.21
You are cautioned that changes or modications not expressly approved by the part responsible
for compliance could void the user’s authority to operate the equipment.
15.105(b)
This equipment has been tested and found to comply with the limits for a Class B digital device,
pursuant to part 15 of the FCC/IC rules. These limits are designed to provide reasonable
protection against harmful interference in a residential installation. This equipment generates,
uses and can radiate radio frequency energy and, if not installed and used in accordance with
the instructions, may cause harmful interference to radio communications. However, there is no
guarantee that interference will not occur in a particular installation. If this equipment does cause
harmful interference to radio or television reception, which can be determined by turning the
equipment o and on, the user is encouraged to try to correct the interference by one or more of
the following measures :
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit dierent from that to which the receiver is
connected.
- Consult the dealer or an experienced radio/TV technician for help.
This Class B digital apparatus complies with Canadian ICES-003 and RSS-210.
Operation is subject to the following two conditions :
1) This device may not cause interference and
2) This device must accept any interference, including interference that may cause undesired
operation of the device.
FCC/IC RF Radiation Exposure Statement :
This equipment complies with FCC/IC radiation exposure limits set forth for an uncontrolled
environment. End users must follow the specic operating instructions for satisfying RF exposure
compliance. This transmitter must not be co-located or operating in conjunction with any other
antenna or transmitter.
Correct Disposal of This Product
(Waste Electrical & Electronic Equipment)
(Applicable in the European Union and other European countries with separate collection
systems). This marking shown on the product or its literature, indicates that it should not
be disposed with other household wastes at the end of its working life. To prevent
possible harm to the environment or human health from uncontrolled waste disposal,
please separate this from other types of wastes and recycle it responsibly to promote the
sustainable reuse of material resources. Household users should contact either the retailer where
they purchased this product, or their local government oce, for details of where and how they
can take this item for environmentally safe recycling.
Business users should contact their supplier and check the terms and conditions of the purchase
contract. This product should not be mixed with other commercial wastes for disposal.
This product has an embedded, non-replaceable battery, do not attempt to open the product or
remove the battery as this may cause injury and damage the product. Please contact the local
recycling facility for removal of the battery. The embedded, non-replaceable battery is designed
to last the life time of the product.
Hereby, EURO COMMUNICATION EQUIPEMENTS, represented by Xavier MARCHANT, CEO, declares
that the SUPERTOOTH DISCO 2, MODEL BTD2, is in compliance with the essential requirements
and other relevant provisions of Directive 1999/5/EC of the European Parliament and of the
Council of 9 March 1999 on radio equipment and telecommunications terminal equipment and
the mutual recognition of their conformity.
To download the user guide in
full version please go to
www.supertooth.net
For the whole declaration please visit : http://www.supertooth.net/download
Euro Communication Equipements SAS
Route de Foix D117
11500 NEBIAS (FRANCE)
Pairing code
0 0 0 0
Pairing code
0 0 0 0
Pantone 286 CFoldingCutting

Produkt Specifikationer

Mærke: SuperTooth
Kategori: Højttaler
Model: Disco II

Har du brug for hjælp?

Hvis du har brug for hjælp til SuperTooth Disco II stil et spørgsmål nedenfor, og andre brugere vil svare dig


Højttaler SuperTooth Manualer

SuperTooth

SuperTooth Disco II Manual

22 August 2024
SuperTooth

SuperTooth HD-Voice Manual

29 Juli 2024
SuperTooth

SuperTooth Disco 3 Manual

25 Juli 2024
SuperTooth

SuperTooth Disco Twin Manual

6 Maj 2024
SuperTooth

SuperTooth Disco 4 Manual

18 April 2024

Højttaler Manualer

Nyeste Højttaler Manualer

Nikkei

Nikkei NWS04 Manual

17 December 2024
Denon DJ

Denon DJ SM50 Manual

17 December 2024
Audac

Audac CIRA724I Manual

17 December 2024
Audac

Audac ATEO6M Manual

17 December 2024
Coastal Source

Coastal Source EB102W710BN Manual

17 December 2024
Coastal Source

Coastal Source B10SW8BN Manual

17 December 2024
Coastal Source

Coastal Source EB82W6.5BN Manual

17 December 2024
NGS

NGS WILD Space 2 Manual

17 December 2024
Canton

Canton Chrono SL 520.2 Manual

16 December 2024
Canton

Canton GLE 456 Center Manual

16 December 2024