Thompson Traders Fireclay KSA-495FC Manual
Thompson Traders
Vaskekumme
Fireclay KSA-495FC
Læs nedenfor 📖 manual på dansk for Thompson Traders Fireclay KSA-495FC (2 sider) i kategorien Vaskekumme. Denne guide var nyttig for 5 personer og blev bedømt med 4.5 stjerner i gennemsnit af 2 brugere
Side 1/2
Fireclay sinks are distinct and ready for heavy duty use. Fireclay is coated in a high strength glaze which is
resistant to scratches and stains. Fireclay is a very dense material which makes each sink hard to chip as well
as very heavy. We recommend using at least two people when lifting the sink. Fireclay sinks will require extra
support and modification to existing cabinets.
1. Trace the rim of the sink on a piece of craft paper or cardboard. Measure the distance between the edge of
the basin and the inside edge of the lip. Add a second line inside the first according to this measurement. Cut
on the second line to make your cut out sheet.
2. Measure the front apron of the sink and cut the face of the cabinet to allow the sink to slide in.
3. Install the sink support in the cabinet base. See steps 4 - 6.
4. Install two lengths of 2x4’s front to back in the cabinet base. Build out the support structure and ledge for
your Fireclay sink to rest on.
5. Install a length of 2x4 vertically under each corner of the sink base to create support legs directly under the
sink.
8. Cut the countertop with your template and install the countertop. Apply a bead of silicone sealant between
the rim of the sink and the countertop to create a watertight seal.
Fir
Fir
Fir
Firecla
ecla
ecla
eclay b
y b
y b
y by T
y T
y T
y Thompson T
hompson T
hompson T
hompson Tr
r
r
raders
aders
aders
aders
Fireclay by Thompson Traders
6. The sink should rest 1/8” inch below the
top of your cabinets, ensuring plenty of
clearance for countertop installation. Use a
level to make sure the sink is even and will
drain correctly.
7. Place the sink in the support structure.
Apply a bead of silicone sealant between
the rim of the sink and the countertop to
create a watertight seal. Hook up the drain
underneath according to the drain instruc-
tions and the sink will be ready for use.
DO NOT overtighten your disposal drain,
this could damage your kitchen sink. Use
plumbers putty to make a water tight seal
between the drain and the sink.
Important
Important
Important
Important
Important
Thompson Traders’ Fireclay sinks require a solid support built into the
cabinet and recommend professional installation. We recommend an
undermount install with a frame supporting the underside of the sink.
Thompson Traders, Inc.
P.O. Box 7407, Greensboro, N.C. 27417
Ph: 336.272.3003
customerservice@thompsontraders.com
www.thompsontraders.com
Produkt Specifikationer
| Mærke: | Thompson Traders |
| Kategori: | Vaskekumme |
| Model: | Fireclay KSA-495FC |
Har du brug for hjælp?
Hvis du har brug for hjælp til Thompson Traders Fireclay KSA-495FC stil et spørgsmål nedenfor, og andre brugere vil svare dig
Vaskekumme Thompson Traders Manualer
11 November 2024
11 November 2024
11 November 2024
11 November 2024
10 November 2024
10 November 2024
Vaskekumme Manualer
- Vaskekumme Ikea
- Vaskekumme Gustavsberg
- Vaskekumme Smeg
- Vaskekumme Kernau
- Vaskekumme Cata
- Vaskekumme CDA
- Vaskekumme ZLine
- Vaskekumme Signature Hardware
- Vaskekumme Whitehaus
Nyeste Vaskekumme Manualer
7 November 2024
6 November 2024
6 November 2024
6 November 2024
6 November 2024
24 September 2024
5 September 2024
1 September 2024
1 September 2024
1 September 2024