Topeak WhiteLite HP Beamer Manual

Topeak Lommelygte WhiteLite HP Beamer

Læs nedenfor 📖 manual på dansk for Topeak WhiteLite HP Beamer (4 sider) i kategorien Lommelygte. Denne guide var nyttig for 8 personer og blev bedømt med 4.5 stjerner i gennemsnit af 2 brugere

Side 1/4
User's Guide
WhiteLiteTM HP Beamer
GB
BATTERY SETUP
SAFETY NOTES
WARRANTY
LIGHT REMOVAL
ANGLE TOE-IN ADJUSTMENT
INSTALLATION
SPECIFICATIONS
BURN TIME
LOW BATTERY INDICATOR :
Burn times are based on use with a 1.5V Alkaline battery. Burn times may vary with use of dierent manufacturer's
batteries. If light is ickering in Constant Mode, the battery has drained, replace with a new battery.
On-Off, mode
selection
button
on
o
Blinking
ø25.4~26.0mm Bracket
ø31.8~33.0mm Bracket
AAA Battery 1.5V (2 pcs)
WARNING :
During long periods of non-use,
remove batteries to prevent damage
caused by leaking battery cells.
Remove battery holder from light
body and insert new battery.
Make sure positive and negative
ends of battery is installed correctly.
AAA Battery 1.5V
AAA Battery 1.5V
PRESS
Battery Holder
Light Body
Constant
Blinking
1
2
Power LevelMode
30 hours
60 hours
Burn Time
9 20 40 60(hrs)
Total Burn Time
at Constant
30
hours
Note : Burn times are based on use
with 1.5V Alkaline batteries.
for ø25.4~26.0mm
Handlebar
for ø31.8~33mm
Handlebar
for ø31.8mm
Handlebar
ø25.4~26.0mm ø31.8~33.0mmø31.8mm
2mm
Allen Key
3mm
Allen Key
2mm
Allen key
Press release button
and slide backward
to remove the light
from the bracket.
PRESS
1. WhiteLite HP Beamer is water-resistant. This allows its use in rain, however, WhiteLite HP Beamer should
never be purposely submerged in water.
2. If the light body or parts become dirty or have been exposed to salt water, gently clean with soft towel using
mild soap and water only. Lubricate and maintain the light body with silicon based grease on the O-rings.
Never use harsh chemicals to clean the lighting system as damage to the housing and lens will occur
3. Safely and properly dispose of the old batteries according to your local regulations.
4. Never place this lighting system within a child's reach.
5. For ultimate safety, the WhiteLite HP Beamer should be
used in conjunction with a specic night riding light.
6. In addition to its brightness, the beam is widely
diused. In case you need to use this light on
public roads, be sure to adjust the angle
downward so as not to blind oncoming trac.
Function: constant and blinking
Bulb: 3 super bright LED’s
Burn Time (approx):
AAA Alkaline Battery 1.5V (2 pcs)
(Standard equipped)
Constant - hours30
Blinking - hours60
Light output : 100 cd
Weight: 29 grams (Light only)
1-year Warranty: All mechanical components against manufacturer defects only.
Batteries are not covered under any implied warranty.
Warranty Claim Requirements
To obtain warranty service, you must have your original sales receipt. Items returned
without a sales receipt will assume that the warranty begins on the date of manufacture.
All warranties will be void if the product is damaged due to user crash, abuse, system
alteration, modication, or used in any way not intended as described in this manual.
* The specications and design are subject to change without notice.
Please contact your Topeak dealer with any questions.
For USA customer service call : 1-800-250-3068
www.topeak.com Copyright © Topeak, Inc. 2013 M-TMS061-GB 01/13


Produkt Specifikationer

Mærke: Topeak
Kategori: Lommelygte
Model: WhiteLite HP Beamer

Har du brug for hjælp?

Hvis du har brug for hjælp til Topeak WhiteLite HP Beamer stil et spørgsmål nedenfor, og andre brugere vil svare dig