Valk VL-HL4 Manual


Læs nedenfor 📖 manual på dansk for Valk VL-HL4 (3 sider) i kategorien Cykel tilbehør. Denne guide var nyttig for 6 personer og blev bedømt med 4.5 stjerner i gennemsnit af 2 brugere

Side 1/3
Colours and sizes may vary
User Manual
[Revision 1.0 August 2021]
READ THIS MANUAL CAREFULLY BEFORE USE –
FAILURE TO DO SO MAY RESULT IN INJURY,
PROPERTY DAMAGE AND MAY VOID WARRANTY. •
KEEP THIS MANUAL FOR FUTURE REFERENCE. •
Products covered by this manual may vary in
appearance, assembly, inclusions, specifications,
description, and packaging.
HELMET INSTRUCTIONS:
The helmet you have just purchased provides
protection, whether on or off the road. To ensure
proper use of this helmet, familiarise yourself with
its features, fit and care by carefully reading
through this manual before wearing your new
helmet.
WARNING:
1. No helmet can protect the wearer against all
possible impacts.
2. The helmet is designed to be retained by a strap
under the lower jaw.
3. To be effective, a helmet must fit and be worn
correctly. To check for correct fit, place helmet on
head and make any adjustments indicated.
Securely fasten retention system. Grasp the
helmet and try to rotate it to the front and rear. A
correctly fitted helmet should be comfortable and
should not move forward to obscure vision or
rearward to expose the forehead.
4. No attachments should be made to the helmet
except those recommended by the helmet
manufacturer.
5. The helmet is designed to absorb shock by partial
destruction of the shell and liner. This damage
may not be visible.Therefore, if subjected to a
severe blow, the helmet should be destroyed and
replaced even if it appears undamaged.
6. The helmet may be damaged and rendered
ineffective by petroleum and petroleum products,
cleaning agents, paints, adhesives and the like,
without the damage being visible to the user.
7. A helmet has a limited lifespan in use and should
be replaced when it shows obvious signs of wear.
8. This helmet should not be used by children while
climbing or doing other activities where there is a
risk of hanging or strangulation if the child gets
trapped whilst wearing the helmet.
THE PROPER FIT:
STEP 1:
The helmet fits correctly when the fit pads hold it
firmly but comfortably in place. Different
thicknesses are provided for that purpose. Pads are
held in place by hook and loop style fasteners. Try
any combination of the different thicknesses
provided until the helmet fits firmly and comfortably.
All fitting adjustments be made with the MUST
helmet in the proper position. Failure to do so will
result in a poor fit.
This will allow the helmet to move out of position or
come off in an accident. For proper position, please
refer to Diagram A.


Produkt Specifikationer

Mærke: Valk
Kategori: Cykel tilbehør
Model: VL-HL4

Har du brug for hjælp?

Hvis du har brug for hjælp til Valk VL-HL4 stil et spørgsmål nedenfor, og andre brugere vil svare dig