Viking PMF302TKSS Manual

Viking Mikrobølgeovn PMF302TKSS

Læs nedenfor 📖 manual på dansk for Viking PMF302TKSS (1 sider) i kategorien Mikrobølgeovn. Denne guide var nyttig for 48 personer og blev bedømt med 4.5 stjerner i gennemsnit af 2 brugere

Download PDF
Side 1/1
" line to cutout 14-15/16" (379.71 mm)@ Center
@" line to hole 14-5/16" (362.73 mm) Center
5/16" (8.77 mm)
FIGURE 1
Side Spacer (2 required)
Must protrude from edge of cabinet
cutout towards center as shown.
(2) bottom spacers
24-5/8" width
1-9/16" height
FIGURE 2
Bottom Spacers (2 required).
FIGURE 3
Front of Cabinet
BUILT-IN TRIM KIT
FLUSH MOUNTING TEMPLATE
FOR CUSTOM SERIES MICROWAVE OVEN
5/16" (8.77 mm)
" Cutout Opening Width 29-15/16" (759.42 mm)@
CABINET CUTOUT LINE
FLOOR LINE OF CUTOUT OPENING
CENTER LINE
Cutout Opening Height 19-7/8" (504 mm)
1"
(25.4 mm)
VBA
1. Align the Flush Mounting Template center line with the center of the cabinet. Align
the Floor Line with the bottom of the cabinet at the desired height. Tape it in place.
2. Cut the cabinet opening along the three Cabinet Cutout Lines and the Floor Line.
3. Install two Side Spacers (see FIGURE 1) and two Bottom Spacers (see FIGURE 2) as
specified in FIGURE 4.
4. Cut out the Side Spacer Templates (R and L) and align the indicated edge to the
corresponding Side Spacer (see FIGURE 3). Be careful to align the Floor Line to the
bottom edges of the Side Spacers.
5. Predrill two holes indicated “ “ in Side Spacer - with a " drill bit.AR/
6. Predrill two holes indicated ” “ in Side Spacer - with a " drill bit.BL/
7. Remove template from the cabinet.
The exhaust duct should be aligned left to right with the left and right edges of the
bottom spacer. The front edge of the exhaust duct should be recessed from the edge of
the bottom spacer by 5 mm in order for the unit to be flush with the front surface of the
trim kit. The exhaust duct should be secured to the bottom spacer with Screw (C).
1-15/16" (50.35 mm) 1-15/16" (49.9 mm)
22-1/16" (561.0 mm)
24-5/8" (625.5 mm)
4"
4"
(1) Bottom Spacer
(2) Bottom Spacer
TOP VIEW
12-1/8" (308.45 mm)
FIGURE 4 Bottom Spacers centered with cabinet cutout
Edges to align Side Spacer Templates (R and L)
Side Spacer -
LSide Spacer -
R
Height Distance Between Holes
A
14-1/4" (361.8 mm)
2-13/16"
(71.1 mm)
CABINET CUTOUT LINE
=
"
Center
line to hole 12-13/16" (324.63 mm)
=
"
Center
line to cutout 13-7/16" (341.6 mm)
=
"
Cutout Opening Width 26-15/16" (683.2 mm)
TINSKB140MRR0

Produkt Specifikationer

Mærke: Viking
Kategori: Mikrobølgeovn
Model: PMF302TKSS

Har du brug for hjælp?

Hvis du har brug for hjælp til Viking PMF302TKSS stil et spørgsmål nedenfor, og andre brugere vil svare dig


Mikrobølgeovn Viking Manualer

Viking

Viking VMDD5306SS Manual

16 Januar 2024
Viking

Viking VMOS501SS Manual

12 November 2023
Viking

Viking RVMTK330SS Manual

15 Februar 2023
Viking

Viking CVMOS201 Manual

10 Februar 2023
Viking

Viking RVM320SS Manual

9 Januar 2023
Viking

Viking PMF302TKSS Manual

18 December 2022
Viking

Viking VMOR506SS Manual

1 December 2022
Viking

Viking VMOS201 Manual

30 November 2022
Viking

Viking RVMHC330SS Manual

28 Oktober 2022

Mikrobølgeovn Manualer

Nyeste Mikrobølgeovn Manualer

Rosieres

Rosieres RMC 350 EIN Manual

15 November 2024
Whirlpool

Whirlpool WMMS3130RB Manual

12 November 2024
Whirlpool

Whirlpool WMMS3130 Manual

11 November 2024
Café

Café CVM517P3RD1 Manual

9 November 2024
Arçelik

Arçelik MA 2030 S Manual

9 November 2024
Arçelik

Arçelik MA 2521-2 G Manual

9 November 2024
Teka

Teka MW FS20 WH Manual

6 November 2024
Cookology

Cookology RETDD20BB Manual

3 November 2024
Cookology

Cookology RETDD20BK Manual

3 November 2024
Cookology

Cookology RETDD20CR Manual

3 November 2024