VisionTek Sound Cube Manual

VisionTek Højttaler Sound Cube

Læs nedenfor 📖 manual på dansk for VisionTek Sound Cube (1 sider) i kategorien Højttaler. Denne guide var nyttig for 12 personer og blev bedømt med 4.5 stjerner i gennemsnit af 2 brugere

Download PDF
Side 1/1
3
SOUNDCUBE
4
5 6
1 2
78
23 1 4
5W/4Ω
901313 / 901323
5.0
1200mAh
SOUNDCUBE
5V 0.5A
143.4*94.8*45.6mm
4~6H(70%VOL)
2~3H
210g±10
Product Name
Model
Bluetooth Version
Battery Capacity
Charging Time
Driver Units
Charging Current
Product Size
Weight
Play Time
Micro USBTF (SD) card
Indicator LED
Bluetooth
My device
Indicator
Power button (On/Off) /
Multi-function button
Indicator
BLUETOOTH CONNECTION
TWS (TRUE WIRELESS STEREO) PAIRING
Find SOUNDCUBE" " in your Bluetooth list on your mobile
phone, tablet or PC.
Step 2 Pair Device
Step 1 Power On
Step 3 Pairing successfully
The LED indicator on the speaker will shine blue once the device
is paired followed by a beep. The device is now paired and you can
start enjoying your SOUNDCUBE
Long press " " button for 2-3 seconds to power on the speaker.
You will hear an alert tone. The speaker will enter Bluetooth
pairing mode notated by the blue indicator LED blinking.
TWS PAIRING INSTRUCTIONS
BASIC OPERATION INTERFACE INSTRUCTIONS
PRODUCT SPECIFICATION FREQUENTLY ASKED
QUESTIONS
How to operate the FM function?
Short press to switch between Bluetooth/ FM/ SD card
Long press to search radio during FM mode
Mode button
Short press button to switch to FM mode, There will be a prompt " "
tone indicating " "FM mode . Long Press " " to begin searching channels,
press " " button to pause channel searching. Long press " " to
cycle through channels found earlier.
LED indicator flashes blue
LED indicator flashes Red
Power on
TF card
mode
FM mode
Bluetooth
mode
CHARGING
STATUS
LOW BATTERY
INDICATOR
Blue indicator light will be on when Bluetooth pairs
successfully.
Blue indicator light will flash quickly when Bluetooth signal
is out of range and speaker will power off automatically
if not re-connected after 10 mins.
Insert TF (SD) card, blue indicator light will flash slowly while
playing; blue indicator will be still when music is paused.
Blue light will flash quickly while searching channels.
Blue light will slowly flash during radio playback
Blue light will stay on when device has been paused.
LED Indicator solid red
LED turns off when fully charged
A: Please charge the speaker and try in a few minutes.
Q: Why does the speaker shut down automatically when it is on?
Q: The speaker cannot connect the once-paired cellphone.
A: First, forget the device from the cellphone’s Bluetooth
list and then short press the power button twice quickly to restart
paring
Q: What kind of charger should I use for the speaker?
Q: What if there is static or a distortion of sound while playing?
Q: The speaker cannot be turned on in a normal situation.
A: All common USB to USB micro chargers can be used, we recommend
chargers above 5V/0.5A.
A:The speaker can be normally used up to 10m with no obstruction.
If it is over 10m or with an obstruction, there might be noise
or discontinuous sound.
A: When there is no bluetooth device paired for 10 minutes, the speaker
will automatically shut down to reduce power consumption.
POWER BUTTON/ MULTI-FUNCTION BUTTON
Power On/Off - Long press the “ ” button for 2-3 sec
Incoming Call - Short press “ ” to answer
Double press “ ” to refuse
Call/Hang Up - During a call, short press “ ” to hang up
Pause / Play - Short press “ ” when playing music to pause or play
Short press - to turn volume down, Long press the - for the previous track / station
Short press + to turn volume up, Long press the + for the next track / station
+ / - Volume buttons/Previous & Next track Buttons
Turn on the two speakers, the blue LED indicators will begin to flash.
Shortpress the “ ” on one of the speakers to enter TWS pairing
mode. An indicating sound will play and the blue LED indicator light
will begin to blink. After 1-2 seconds, the speakers will automatically
pair. Once paired, an alert tone will play and the blue LED
light will stay on. Once TWS pairing is complete, open up the
Bluetooth settings on your device and select “SOUNDCUBE” from the
list of devices. This will pair the speakers to your device at the same
time. Short press the “ ” on either speaker to disconnect the TWS
pairing. The blue LED indicator will turn off once disconnected.
NOTE: For TWS pairing, connect the two speakers together first, then
connect to your smartphone / Bluetooth device.
M H AADE IN C IN
USER MANUAL

Produkt Specifikationer

Mærke: VisionTek
Kategori: Højttaler
Model: Sound Cube

Har du brug for hjælp?

Hvis du har brug for hjælp til VisionTek Sound Cube stil et spørgsmål nedenfor, og andre brugere vil svare dig


Højttaler VisionTek Manualer

VisionTek

VisionTek Sound Cube Manual

29 August 2024

Højttaler Manualer

Nyeste Højttaler Manualer

NGS

NGS WILD Space 2 Manual

17 December 2024
Canton

Canton Chrono SL 520.2 Manual

16 December 2024
Canton

Canton GLE 456 Center Manual

16 December 2024
Canton

Canton Vento 820.2 Manual

16 December 2024
Canton

Canton Chrono SLS 780 DC Manual

16 December 2024
Canton

Canton In Wall 500 LCR Manual

16 December 2024
Canton

Canton InWall 949 LCR Manual

16 December 2024
Canton

Canton InWall 845 LCR Manual

16 December 2024
Canton

Canton InCeiling 855 Manual

16 December 2024
Canton

Canton Atelier 950 Manual

16 December 2024