Vtech VC7001 Manual

Vtech Overvågningskamera VC7001

Læs nedenfor 📖 manual på dansk for Vtech VC7001 (21 sider) i kategorien Overvågningskamera. Denne guide var nyttig for 4 personer og blev bedømt med 4.5 stjerner i gennemsnit af 2 brugere

Download PDF
Side 1/21
Congratulations
on purchasing your new VTech product.
Before using this product, please read
Important safety instructions.
This manual has instructions on how to set up
and register your new sensor. For instructions
on sensor settings, see the user’s manual that
came with your ULE compatible products. Visit
www.vtechphones.com/wireless-monitoring
for a list of the latest ULE compatible products.
You may also view or download the online
User’s manual of the respective product for a
full set of installation and operation instructions
at www.vtechcanada.com.
What’s in the box
Your product package contains the following
items. Save your sales receipt and original
packaging in the event warranty service is
necessary.
Sensor overview
1 – Latch button
Press to open the battery compartment
case.
2 – Back cover
3 – Pair button
Red for a second when the sensor is
powered on.
Press and hold to enter the registration
mode.
4 – LED light
Flashes red when the sensor is in the
registration mode.
5 – Battery compartment case
•
•
•
•
Before use
Install batteries to the sensor
NOTES
Use 2 x AAA batteries. Alkaline batteries are
recommended. If you use other kind of batteries,
the performance of the sensor varies.
Do not mix old and new batteries. Do not mix
alkaline, standard (Carbon-Zinc) or rechargeable
(Ni-Cad, Ni-Mh, etc) batteries.
While you insert the batteries, make sure the
polarities are correct.
The batteries operate properly under the
temperature between 0°F (-18°C) and 130°F (55°C).
Press the latch button on the sensor to
open the battery compartment case.
Insert two AAA alkaline batteries into the
battery compartment.
Add and register a sensor
Your new Garage Door Sensor VC7001
can be registered to any ULE compatible
product.
Register each sensor individually to the
respective ULE compatible product before use.
Register a sensor:
Enter the registration mode by selecting
the option for adding a sensor to your ULE
compatible product. Refer to the user’s
manual of your ULE compatible product for
more detailed instructions.
Press and hold the pair button on the
Garage Door Sensor, until the LED light
flashes red, to enter the registration mode.
When the registration process is complete,
the red LED light on the sensor will remain
steady for about two seconds, and then
turn off. The registration process takes
about 90 seconds to complete.
•
•
•
•
1.
2.
1.
2.
3.
NOTE
You can also download online User’s manuals at
http://www.vtechcanada.com/.
Replacing a sensor
If you have purchased this new VC7001
accessory sensor to replace an old sensor,
follow the instructions to deregister your old
sensor.
To replace a sensor, you must deregister the
registered sensor first, and then register this
new sensor to your ULE compatible product.
Deregister a sensor or all sensors:
Refer to the online User’s manual of your
ULE compatible product at
www.vtechphones.com/support/manuals
to deregister a sensor or all sensors.
Check the sensor before use
1. Hold the sensor and tilt it to 90 degrees,
with the logo facing downward.
You will receive alerts at your ULE
compatible product. Refer to the
Installation guide or User’s manual of
your ULE compatible product for the
sensor alerts.
2. Tilt the sensor to 90 degrees to the original
upright position.
NOTE
There is a component inside this sensor to detect
orientation. It is normal to hear a rattling sound
when tilted.
•
•
•
•
Test the sensor signal strength
You can mount the Garage Door Sensor on a
garage door that raises overhead.
Before mounting the sensor, make sure you
test if the location you install the sensor is in
range from your ULE compatible product.
1. Take the sensor to the desired mounting
location on the garage door, and use
adhesive tape to hold it temporarily in place.
2. Enter the signal checking or testing mode
at your ULE compatible product to test the
sensor signal strength.
3. Open the garage door again to make sure
you receive alerts at your ULE compatible
product.
NOTES
If you do not receive an alert when you open the
garage door, move your ULE compatible product
closer to the garage or move the sensor closer to
the respective product.
Depending on surroundings and obstructing
factors, like concrete garage walls, a tall metal
storage cabinet, or an SUV, the sensor may not
transmit to the base properly.
After testing the sensor signal strength, mark
the mounting location on the door, window,
or medicine cabinet and its respective frame.
Then, remove the adhesive tape and proceed
to the mounting process.
•
•
Mount the sensor
NOTE
Make sure the mounting surface is clean.
A textured surface or any imperfections to
a smooth surface can keep the mounting tape
from making a strong bond.
TIP
You can choose to mount the sensor with the
mounting tape first, and then use screws later if
you decide to mount it at that location for long term.
Mount with tape
1. Attach the mounting tape onto the
rectangular area of the back cover, and
then stick the Garage Door Sensor onto the
garage door.
2. Firmly press the sensor for 30 seconds to
ensure full contact on the surface area.
Mount with screws
1. Press the latch button on the sensor to
open the battery compartment case.
2. Use the two holes on the back cover to mark
the desired location of the garage door.
3. Remove the back cover and drill two holes
into the garage door.
•
•
4. Align the holes on the back cover of the
sensor with the holes on the garage door.
Stick the back cover onto the door. Tighten
the screws into the holes to secure the back
cover onto the garage door.
TIP
You may also choose to attach the mounting tape
onto the back cover to strengthen the bond, if
necessary.
5. Push the battery compartment case back
to the back cover on the garage door until it
clicks into place.
•
General product care
Taking care of your sensor
Your sensor contains sophisticated electronic parts,
so it must be treated with care.
Avoid rough treatment
Place the sensor down gently. Save the original
packing materials to protect your sensor if you ever
need to ship it.
Avoid water
Your sensor can be damaged if it gets wet. Do not
use the sensor outdoors in the rain, or handle it with
wet hands. Do not install the sensor near a sink,
bathtub or shower.
Electrical storms
Electrical storms can sometimes cause power surges
harmful to electronic equipment. For your own safety,
take caution when using electrical appliances during
storms.
Cleaning your sensor
Your sensor has a durable plastic casing that should
retain its luster for many years. Clean it only with a
dry non-abrasive cloth. Do not usedampened cloth or
cleaning solvents of any kind.
Storage
When you are not going to use the sensor for some
time, remove the battery from the sensor. Store the
sensor in a cool and dry place.
Go to www.vtechcanada.com
to register your product for
enhanced warranty support and
the latest VTech product news.
VC7001
Accessory Garage Door Sensor
for use with
ULE certified systems*
User’s manual
(Canada version)
User’s manual
Garage Door Sensor Double-sided
mounting tape
AAA battery x 2 Screw x 2
User’s manual
* Visit for the latest ULE compatible products.www.vtechphones.com/wireless-monitoring
NOTE
The garage images in this manual are for conceptual
reference only.
•

Produkt Specifikationer

Mærke: Vtech
Kategori: Overvågningskamera
Model: VC7001

Har du brug for hjælp?

Hvis du har brug for hjælp til Vtech VC7001 stil et spørgsmål nedenfor, og andre brugere vil svare dig


Overvågningskamera Vtech Manualer

Vtech

Vtech VC7003 Manual

14 December 2024
Vtech

Vtech VC7002 Manual

13 December 2024
Vtech

Vtech VC7001 Manual

13 December 2024

Overvågningskamera Manualer

Nyeste Overvågningskamera Manualer

Vimar

Vimar ELVOX 693T Manual

15 December 2024
D-Link

D-Link DCS-8330LH Manual

13 December 2024
I-PRO

I-PRO WV-S66300-Z3N Manual

13 December 2024
I-PRO

I-PRO WV-X66600-Z3LK Manual

13 December 2024
I-PRO

I-PRO WV-S66300-Z4 Manual

13 December 2024
I-PRO

I-PRO WV-S61602-Z3 Manual

13 December 2024
I-PRO

I-PRO WV-S66300-Z4L Manual

13 December 2024
I-PRO

I-PRO WV-S66700-Z3LN Manual

13 December 2024
I-PRO

I-PRO WV-S66700-Z3N Manual

13 December 2024
I-PRO

I-PRO WV-U65301-Z1G Manual

13 December 2024