Zebra FX7500 Manual

Zebra TV antenne FX7500

Læs nedenfor 📖 manual på dansk for Zebra FX7500 (2 sider) i kategorien TV antenne. Denne guide var nyttig for 46 personer og blev bedømt med 4.5 stjerner i gennemsnit af 2 brugere

Download PDF

Side 1/2

FX7500 RFID Reader

Quick Start Guide

Zebra reserves the right to make changes to any product to improve

reliability, function, or design.

Zebra does not assume any product liability arising out of, or in connection

with, the application or use of any product, circuit, or application described

herein.

No license is granted, either expressly or by implication, estoppel, or

otherwise under any patent right or patent, covering or relating to any

combination, system, apparatus, machine, material, method, or process in

which Zebra products might be used. An implied license exists only for

equipment, circuits, and subsystems contained in Zebra products.

Zebra Technologies Corporation

Lincolnshire, IL U.S.A.

www.zebra.com

stylized Zebra head are trademarks of ZIH Corp, registered in many

jurisdictions worldwide. All other trademarks are the property of their

respective owners.

MN000070A07 Revision A — June 2018

1 2 3

Introduction

FX7500 Series readers provide real time, seamless tag processing for EPC

Class1 Gen2 compliant tags. This Quick Start Guide provides information

about installing and connecting the reader. For more information refer to the

FX Series RFID Fixed Reader Integration Guide

, available at:

www.zebra.com/support.

Reader Installation

1. Unpack the reader.

2. Set up the reader and tags on a desktop.

3. Connect the antenna to antenna Port 1.

4. Connect the Ethernet cable to the Ethernet port.

Connecting the reader to a subnet that supports DHCP is recommended.

This installation procedure is not guaranteed to work if DHCP is disabled

in the reader and if the reader is connected directly to a PC.

5. Connect the AC power supply to a power outlet and connect to the power

port.

The green power LED remains lit after successfully powering up.

Connecting to the Reader

To connect via host name:

1. Open a browser. Refer to the

FX Series RFID Fixed Reader Integration

Guide

for recommended browsers.

2. Enter the host name, provided on a label on the reader, in the browser

(e.g., http://fx7500cd3b0d) and press Enter

The User Login window

appears and the reader is ready.

3. If you are using a worldwide device, go to Configure Reader > Region to

set the country in which you are using the device.

Additional Information

Following are links to additional information and software:

Product Manuals available at: www.zebra.com/support

FX Series RFID Fixed Reader Integration Guide

(p/n MN000026Axx)

RFID Reader Software Interface Control Guide

(p/n 72E-131718-xx)

RFID Demo Applications User Guide

(p/n 72E-160038-

)

•

Data Sheet: www.zebra.com/FX7500.

•

PowerSession and other related software:

www.zebra.com/support.

Regulatory Information

This provides information for the Zebra, FX series RFID Reader products,

Regulatory Model No: FX7500. For information on setting up and using the

reader, refer to the

FX Series RFID Fixed Reader Integration Guide

www.zebra.com/support.

All Zebra devices are designed to be compliant with rules and regulations in

locations they are sold and will be labeled as required. Local language

translations are available at the following website: www.zebra.com/support.

Zebra devices must be professionally installed. The Radio Frequency Output

Power will not exceed the maximum allowable limit for the country of

operation. Any changes or modifications to Zebra equipment, not expressly

approved by Zebra, could void the authority to operate the equipment.

Antennas

Use only the supplied or an approved replacement antenna. Unauthorized

antennas, modifications, or attachments could cause damage and may

violate regulations.

Health and Safety Recommendations

Warning for Use of Wireless Devices

Please observe all warning notices with regard to the usage of

wireless devices.

Potentially Hazardous Atmospheres

You are reminded of the need to observe restrictions on the use of radio

devices in fuel depots, chemical plants etc. and areas where the air contains

chemicals or particles (such as grain, dust, or metal powders).

Safety in Hospitals

Wireless devices transmit radio frequency energy and may affect

medical electrical equipment. When installed adjacent to other

equipment, it is advised to verify that the adjacent equipment is not adversely

affected.

Use With Hearing Aids

When some wireless devices are used near some hearing devices (hearing

aids and cochlear implants), users may detect a buzzing, humming, or

whining noise. Some hearing devices are more immune than others to this

interference noise, and wireless devices also vary in the amount of

interference they generate. In the event of interference you may want to

consult your hearing aid supplier to discuss solutions.

Other Medical Devices

Please consult your physician or the manufacturer of the medical device, to

determine if the operation of your wireless product may interfere with the

medical device.

FCC / EU RF Exposure Guidelines

Safety Information

Reducing RF Exposure - Use Properly

Only operate the device in accordance with the instructions supplied.

International

The device complies with internationally recognized standards covering

human exposure to electromagnetic fields from radio devices. For

information on "International" human exposure to electromagnetic fields refer

to the Zebra Declaration of Conformity (DoC) at www.zebra.com/doc.

For further information on the safety of RF energy from wireless devices, see

responsibility.zebra.com/index.php/downloads/, which is located under

Wireless Communications and Health.

US and Canada

To comply with FCC RF exposure requirements, antennas that are mounted

externally at remote locations or operating near users at stand-alone desktop

or similar configurations must operate with a minimum separation distance of

34 cm from all persons.

To comply with EU RF exposure requirements, antennas that are mounted

externally at remote locations or operating near users at stand-alone desktop

or similar configurations must operate with a minimum separation distance of

34 cm from all persons.

Power Supply

This device must be powered from an 802.3af or 802.3at compliant power

source which has been certified by the appropriate agencies, or by a Zebra

approved UL LISTED ITE (IEC/EN60950-1) power supply with electrical

ratings: Output 24Vdc, min 3.25A, with a recommended ambient

temperature of at least 40 degrees C. Use of alternative power supply will

invalidate any approvals given to this unit and may be dangerous.

Air Handling Space Applications

This device is suitable for use in Environmental Air Handling Space (EAHS)

in accordance with Section 300-22(c) of the National Electric Code, and

Sections 2-128, 12-010(3) and 12-100 of the Canadian Electrical Code, Part

21, CSA C22.1.

All Cables intended for interconnecting the FX7500 to other devices shall be

suitable rated for use in Environmental Air Handling Space per UL 2043.

Devices such as Power Adapters, PoE (Power Injectors), antennas shall not

be installed in the Environmental Air Handling Space unless they are suitable

for use in the EAHS per UL 2043.

Wireless Devices Country Approvals

Regulatory markings, subject to certification, are applied to the device

signifying the radio is approved for use in the following countries: United

States, Canada, Japan, China, South Korea, Australia, and Europe

Please refer to the Zebra Declaration of Conformity (DoC) for details of other

country markings. This is available at www.zebra.com/doc.

Operation of the device without regulatory approval is illegal.

Note1: Europe includes, Austria, Belgium, Bulgaria, Croatia, Czech Republic,

Cyprus, Denmark, Estonia, Finland, France, Germany, Greece, Hungary,

Iceland, Ireland, Italy, Latvia, Liechtenstein, Lithuania, Luxembourg, Malta,

Netherlands, Norway, Poland, Portugal, Romania, Slovak Republic,

Slovenia, Spain, Sweden, Switzerland and the United Kingdom.

Country Selection - Worldwide Version Only

Select only the country in which you are using the device. Any other

selection will make the operation of this device illegal.

NOTE This step is not required for networks supporting

Power-over-Ethernet (POE).

NOTE Connect the reader to a network that supports host name

registration and lookup to ensure the network can access

the reader using the host name. For instance, some

networks can register host names through DHCP. When

first connecting to the reader, it is recommended to keep

DHCP enabled in both the PC and in the reader, although it

is not guaranteed that host name will work all the time.

If the host name label is missing, construct the host name

using the reader MAC address on the bottom of the reader.

To do this, enter the prefix FX7500, followed by the last six

characters of the MAC address. For example, for a MAC

address of 0023683BA63A, use the prefix FX7500,

followed by 3BA63A.

Enter http://FX75003BA63A in the browser address bar to

access the reader.

If the host name method does not work, refer to the section,

Connecting to the Reader

in the

FX Series RFID Fixed

Reader Integration Guide

for other connection options.

Port 1 Port 2 Port 3 Port 4 GP

Antenna Port 1

Port 4 GPIO 24 VDC

Power10/100 BaseT Ethernet Port

(with POE)

Produkt Specifikationer

Mærke:	Zebra
Kategori:	TV antenne
Model:	FX7500
Bredde:	149.9 mm
Dybde:	43.2 mm
Højde:	195.6 mm
Vægt:	860 g
Produktfarve:	Hvid
Opbevaringstemperatur (T-T):	-40 - 70 °C
Relativ luftfugtighed ved drift (H-H):	5 - 95 %
Driftstemperatur (T-T):	-20 - 55 °C
Husmateriale:	Aluminium, Metal, Plastic
LED-indikatorer:	Activity, Power, Status
Harmoniseret systemkode (HS):	84719000
Grænseflade:	USB
Frekvens:	928000 kHz