Zenec ZE-RCE4605 Manual

Zenec Bilkamera ZE-RCE4605

Læs nedenfor 📖 manual på dansk for Zenec ZE-RCE4605 (2 sider) i kategorien Bilkamera. Denne guide var nyttig for 5 personer og blev bedømt med 4.5 stjerner i gennemsnit af 2 brugere

Side 1/2
ZE-RCE4605
MOUNTING
INSTRUCTIONS
REAR VIEW CAMERA
KEY FEATURES
• High resolution rear view camera for pick-up trucks, motor-homes and van type vehicles
• Light sensor controlled day and night mode with nine night vision IR LED’s
• 10 m length of main wire harness
DESCRIPTION:
This ZENEC rear view camera model has been developed for use with pick-up trucks, motor-homes and Van type vehicles. The
use of high quality parts and materials for best weather resistance and longevity, as well as the clever construction according to
IP67 protection class allow for a perfect operation in the afore mentioned target vehicles.
The Z-RCE4605 offers a large 120° horizontal viewing angle and can be operated in inverted or non-inverted picture mode to
comply with a great variety of RVC monitors and head units.
This product is compatible with all ZENEC moni- and naviceivers, as well as the ZENEC E>GO product line-up.
10.0 m
RCA yellow:
Connect to RVC video-in
Red: DC 12 V
Black: GND
0.5 m
Fuse
0.5 A
5.5 mm
jack
RCA yellow:
Connect to
RVC video-
signal
NOTES:
Following the latest trend in vehicle electronics, newer cars mainly use a pulse width modulated power feed for outer
hull lights, which is unsuitable for imaging/video electronics, as it causes considerable picture distortion.
Use the included connection cable exclusively. Altering or replacing it will void your warranty.
The camera is water- and dustproof and has been tested according to international standard IP67. However, cleaning
your vehicle with a high pressure washer, may damage the housing sealings. For that reason you are asked to steadily
keep a distance of at least one meter between water nozzle and camera housing.
Mounting:
Camera for universal deployment and mounting at the upper roof end of pick-up trucks, motor-homes and van type
vehicles. The view angle of the camera sensor can be dialed in manually.
Montage:
Kamera für universelle Montage und Verwendung an der hinteren Dachabrisskante von Kleintransportern, MotorHomes
und Vans. Der Betrachtungswinkel des Kamerasensors lässt sich manuell einstellen.
ZENEC by ACR AG ∙ Bohrturmweg 1 ∙ CH-5330 Bad Zurzach ∙ Switzerland
Rev. B
EU Legal Representative:
ACR S & V GmbH ∙ Industriestr. 35 D-79787 Lauchringen Germany


Produkt Specifikationer

Mærke: Zenec
Kategori: Bilkamera
Model: ZE-RCE4605

Har du brug for hjælp?

Hvis du har brug for hjælp til Zenec ZE-RCE4605 stil et spørgsmål nedenfor, og andre brugere vil svare dig




Bilkamera Zenec Manualer

Bilkamera Manualer

Nyeste Bilkamera Manualer