Zenec ZE-RVC45DT Manual

Zenec Autocamera ZE-RVC45DT

Læs nedenfor 📖 manual på dansk for Zenec ZE-RVC45DT (2 sider) i kategorien Autocamera. Denne guide var nyttig for 10 personer og blev bedømt med 4.5 stjerner i gennemsnit af 2 brugere

Side 1/2
MOUNTING
INSTRUCTIONS
ZE-RVC45DT
REAR VIEW CAMERA
KEY FEATURES
Compact 45° universal rear view camera
System design for easy mounting with deployment as front- or rear-view camera
Detailed high contrast picture suited for twilight conditions
Separable 3-part system cable, with cable parts of 0.7 m + 7.0 m + 0.7 m length
Normal or mirror image picture output selectable
Aluminum die-cast housing with M6 threaded tube
DESCRIPTION:
The ZENEC ZE-RVC45DT rear view camera model was developed for universal use, allowing retrofitting of a great variety of
vehicles due to its extremely compact housing shape. The picture can be outputted as normal or mirror image, for mounting and
utilization of this model as front- or as rear view camera. Besides, the ZE-RVC45DT offers a large horizontal viewing angle of 140°
for good overview.
This product is compatible with a wide variety of 2-DIN A/V receivers of the aftermarket and the ZENEC E>GO product line up,
including ZENEC 2-DIN infotainers and naviceivers.
ZENEC ∙ Bohrturmweg 1 ∙ CH-5330 Bad Zurzach ∙ Switzerland
CAUTION:
Use the included connection cable exclusively. Altering or replacing it will void your warranty.
The camera is water- and dustproof and has been licensed according to the international standard IP69K. However,
vehicle cleaning using high pressure water and steam jet devices may still lead to damage of IP69K rated camera
models by water intrusion. Keep a distance of at least one meter between the water nozzle and the camera housing.
Rev. B
EU Legal Representative:
ACR S & V GmbH ∙ Industriestraße 35 ∙ D-79787 Lauchringen ∙ Germany
EN
Technical Specifications:
Image device: ¼” / 6.4 mm Aptina ASX340AT CMOS sensor
Lens focal length: f1.5
TV system: NTSC / 60 fps
View angle: 180°(D) x 140°(H) x 90°(V)
Native sensor resolution: 680 (H) x 512 (V) pixels
Resolution of video-out: > 420 TV lines
Frame rate: 60 fi elds/sec.
Signal to noise ratio: > 48 dB
Light sensitivity: 0.5 Lux/F1.2/50IRE
Video output: 1.0 Vp-p, 75 ohms CVBS
White balance: Auto
Backlight compensation: Auto
Gamma correction: 0.45
Gain control: Auto
Sync system: Auto
Power supply: DC 6 - 16V
Current consumption: 60mA (DC12V) / ≤ 720mW
IP protection rating: IP69K
Operating temperature: -30°C~+75°C
DE
Technische Spezifikationen
Kamerasystem: ¼” / 6,4 mm Aptina ASX340AT CMOS Sensor
Brennweite Linse: f1.5
TV System: NTSC / 60 fps
Betrachtungswinkel: 180°(D) x 140°(H) x 90°(V)
Native Sensor Aufl ösung: 680 (H) x 512 (V) Pixel
Aufl ösung Ausgangssignal: > 420 TV Linien
Bildwiederholrate: 60 Felder/Sek.
Signal/Rauschabstand: > 48 dB
Lichtempfi ndlichkeit: 0.5 Lux/F1.2/50IRE
Video Ausgang: 1,0 Vp-p, 75 Ohm CVBS
Weißabgleich: Automatisch
Belichtungskompensation: Auto
Gamma Korrektur: 0.45
Helligkeitsabgleich: Automatisch
Synchronisation: Automatisch
Spannungsversorgung: DC 6 - 16V
Stromverbrauch: 60mA (DC12V) / ≤ 720mW
Schutzklasse: IP69K
Betriebstemperatur: -30°C~+75°C
Video Out
(connect to Moni-/Naviceiver)
Red: CAMERA PWR (+12V)
7.0 m
0.7 m
0.7 m
Black: GND
Rear camera mode: Green cable open
Front camera mode: Green cable twisted
M6 Nylon nut*
* Torque 20Nm
2A fuse


Produkt Specifikationer

Mærke: Zenec
Kategori: Autocamera
Model: ZE-RVC45DT

Har du brug for hjælp?

Hvis du har brug for hjælp til Zenec ZE-RVC45DT stil et spørgsmål nedenfor, og andre brugere vil svare dig