Asaklitt 36-4123 Manual
Læs nedenfor 📖 manual på dansk for Asaklitt 36-4123 (8 sider) i kategorien Stopur. Denne guide var nyttig for 35 personer og blev bedømt med 4.5 stjerner i gennemsnit af 2 brugere
Side 1/8
English
GREAT BRITAIN •
for consumer contact, please visit www.clasohlson.co.uk and click on customer service.
Ver. 201011
Battery
The stopwatch operates on 1x 3 V CR2032 battery. For change
of battery, open the battery compartment on the back of the
stopwatch by twisting open the flap with e.g. a coin. Remove
the old battery and insert a new one. Make sure that the plus
pole is placed upward.
Stopwatch
5. The upper part of the display resumes to showing the time
for the next lap. The amount of laps are updated as well.
The lower part of the display continues to run time.
6. Press to stop the timekeeping. “PAUSE” is Start/stop
shown on the display. The total time and remaining laps are
shown in alternate blinking.
7. Now you can press to start the timekeeping Split/Reset
again, or press to stop the timekeeping.Start/Stop
8. If you would like to store the data from the stopwatch, hold
in for 2 seconds. “STORE DATA” is displayed.Start/stop
9. If you would like to erase the data, hold in for two se-Light
conds. “CLEAR DATA” blinks while you hold in the button.
Note that all stored data in the stopwatch is erased.
Storing and using data
Stopwatch
Art.no. 36-4438 Model WT039
Please read the entire instruction manual before using the
product and save it for future reference. We reserve the right for
any errors in text or images and any necessary changes made
to technical data. If you have any questions regarding technical
problems please contact Customer Services.
Product Description
• Stopwatch to max. 23 hours, 59 minutes and 59 seconds
with 1/100 seconds precision, split time and sound signal
with lap-time records.
• Memory for lap-times, split times, finishing times, quickest
lap and average time.
• Pulse clock from 50 to 240 beats/minute. The user can set
age, gender and high/low limit. The pulse indicator reads
data from the finger.
• Display of time, date and day.
• Automatic year digit from 2005 to 2035.
• Two time zones.
• 12 or 24 hour display.
• Alarm with possibility for two alarm settings.
• Hour signal.
• Pace keeper, adjustable from 10 to 240 signals/minute.
1. Press Mode once or several times until the display shows
CHRO for approx. one second and then changes to
the following:
• To retrieve stored data from the stopwatch press Split/
Reset to browse the lap you would like to look at.
Then press to see the lap you have chosen.Start/stop
• Press to browse to the laps. The sequence is: Start/stop
Individual lap-time – total time – best lap time – average
lap-time.
Time, date and day
Settings
1. Press once or several times to move to normal time Mode
mode. Time is shown for 0.5 seconds before the display
shows normal time mode.
2. Hold in for 2 seconds to move to the setting mode. Light
The digit for time zone starts to blink. Press to Start/stop
switch between the time zones and confirm with .Mode
3. The time indicator starts to blink. Press to Start/stop
increase the value and press to decrease. Split/Reset
Increase or decrease the value quickly by holding in the
respective button. Confirm the setting by pressing .Mode
Split/Reset
Mode
Start/stop
Light
Sensor for
pulse indicator
2. Start the timekeeping by pressing . The display Start/stop
shows minutes, seconds and 1/100.
If the timekeeping exceeds 1 hour, the number of hours are
given in the upper part of the display.
3. In the display’s upper left corner the number of laps are
shown. The upper part of the display shows lap-times and
the lower part shows split times. Split time refers to the time
it takes to travel from start to a given point along the track.
Lap-Time refers to the time it takes to travel a given dis-
tance within the total distance.
4. Every time you finish a lap press
Split/Reset to save the time.
This time blinks in the upper part
of the display for 2 seconds at
the same time as the current time
shows continuously in the lower
part of the display. Every time you
set a lap record “FASTEST” blinks
at the same time as a signal sounds.
Produkt Specifikationer
| Mærke: | Asaklitt |
| Kategori: | Stopur |
| Model: | 36-4123 |
Har du brug for hjælp?
Hvis du har brug for hjælp til Asaklitt 36-4123 stil et spørgsmål nedenfor, og andre brugere vil svare dig
Stopur Asaklitt Manualer
5 August 2024
22 December 2023
Stopur Manualer
- Stopur Extech
- Stopur Silva
- Stopur Renkforce
- Stopur Oregon Scientific
- Stopur Sportline
- Stopur Steren
- Stopur Accusplit
- Stopur Marquant
- Stopur Dexford
- Stopur TFA Dostmann
- Stopur ETT
Nyeste Stopur Manualer
30 September 2024
24 August 2024
18 August 2024
14 August 2024
11 August 2024
10 August 2024
8 August 2024
7 August 2024
6 August 2024
6 August 2024