Celestron Elements FireCel Mega 6 Manual

Celestron power bank Elements FireCel Mega 6

Læs nedenfor 📖 manual på dansk for Celestron Elements FireCel Mega 6 (2 sider) i kategorien power bank. Denne guide var nyttig for 16 personer og blev bedømt med 4.5 stjerner i gennemsnit af 2 brugere

Side 1/2
Thank you for purchasing the FireCel Mega 6 3-in-1 Hand
Warmer, Flashlight and Power Bank! The FireCel Mega 6 is water
resistant, dust proof and drop tested. It has a built-in hand
warmer feature that will provide up to 8 hours of scent-free
heat, a bright 4 mode LED flashlight and is capable of charging
up your personal electronic devices, with its powerful 6000 mAh
rechargeable lithium ion battery. It is a must have for any serious
outdoor enthusiast!
WARNING: Read all instructions and warnings thoroughly before
using the FireCel Mega 6. Improper use of this
product may result in product damage, excess
heat, toxic fumes, fire or explosion. Not intended
for children.
INCLUDED IN THE BOX ARE:
1 - FireCel Mega 6
1 - USB Cable
1 - Soft Carry bag
1 - 4 550 paracord strap with carabiner
PARTS CALLOUT:
1. Power Button
2. D Ring/O Ring thumbscrew
3. Water-resistant lid
4. 4” 550 paracord strap
5. Carabiner
6. Mini USB “IN” port
7. USB “OUT” port: (standard 2.0 ) 5V- 2.1A
8. Main heating surface
9. LED indicators (under surface)
10. LED Flashlight
1. CHARGING THE INTERNAL LITHIUM
ION BATTERY
Your FireCel Mega 6 has an internal, 6000 mAh rechargeable
lithium ion battery, which allows for up to 8 hours of continuous
use at a constant temperature of 40° to 45° Celsius (10 to 113°
Fahrenheit). The FireCel Mega 6 ships with a partial charge, but
you should charge it completely before using it for the first time.
STEPS
1. Unscrew the thumbscrew, D Ring (2) and lift the water-resistant
lid (3) to expose the USB ports (the cover will stay tethered to
the main housing.)
2. Plug the standard USB plug end of the included USB cable into
a USB port on a PC, laptop, car charger or USB 5V 2.1A Max
adapter plug.
3. Plug the mini USB end of the included USB cable into the “IN”
port (6) on your FireCel Mega 6.
4. Once plugged in, the blue LEDs (9) will start blinking indicating
a charge is in progress.
5. Charging is complete when all 4 blue LEDs stop blinking.
NOTE: Using the O Ring attached to the thumbscrew to open
the cover will make the process much easier.
2. USING THE FLASHLIGHT
Press and release the power button (1) to turn on the flashlight (10).
The flashlight has 4 modes:
1. WHITE LEDs ON, 2. RED LEDs ON,
3. WHITE and RED LEDs ON, 4. ALL S.O.S.
Each press and release of the power button will toggle through
the modes and then power theashlight off.
3. USING THE HAND WARMER FEATURE
Press and hold the power button (1) until the RED LED indicator
(9) illuminates.
This indicates the Hand warmer is in use and the Main heating
surface (8) will begin to heat up.
In minutes, it will reach its maximum temperature
Press and hold the power button (1) to turn off the hand warmer.
NOTE: To maintain water resistance, the water-resistant lid (3)
must be secured tight. You can turn the hand warmer and
flashlight on while keeping lid in place.
4. CHARGING AN EXTERNAL DEVICE
Simply plug your device’s USB 2.0 plug into the standard USB
“OUT” port (7) on the FireCel Mega 6 while the other end of your
charging cable is connected to your smartphone, tablet, camera
or MP3 player.
The internal battery will automatically start charging your device.
NOTE: The USB OUT” Port is rated at 5v-2.1A out, which is designed
to work best with tablets.
The battery indicator blue LEDs (9) will display the battery
power while you charge (1 LED- 25%, 2 LEDs- 50%, 3 LEDs-
75%, 4 LEDs- 100%).
5. SPECIFICATIONS
BATTERY: Rechargeable lithium ion battery– 6000 mAh
INPUT: Mini USB Connector / 5V 1.8A Max
HAND WARMER CONTINUOUS USE TIME: Up to 8 hours
continuous use (based on fully charged battery)
HAND WARMER TEMPERATURE RANGE:
40° TO 45° C (10 TO 113° F)
IP-65 RATED: Complete dust protection (6) Water resistant (5)
FLASHLIGHT FEATURE: (2) Bright White / (2) Red LEDs
4 MODES
1. WHITE LEDs ON
2. RED LEDs ON
3. WHITE/RED LEDs ON
4. S.O.S. (All LEDs)
C-LINK FEATURE: Compatible with other Celestron Elements
power banks for extending heat time and recharging the
internal battery
OUTPUT: Standard 2.0 USB port: 5V- 2.1A
(Smart Charge Technology)
AUTO-CHARGE FEATURE: Plug into the standard USB port and
FireCel Mega 6 will automatically start charging your electronic device.
LED STATUS INDICATORS:
(4) Blue- Battery indicator LEDs
(1) Red- Hand warmer indicator
(1) Green- Charge OUT indicator
OPERATING TEMPERATURE RANGE:
to 4Celsius (32° to 11 Fahrenheit)
STORAGE TEMPERATURE RANGE:
68° to 7Fahrenheit (optimal)
ACCESSORIES: (1) Soft Carry bag
(1) 4” 550 paracord strap with carabiner
WEIGHT: 6.2 oz. (177 grams)
DIMENSIONS: 4.6 in x 2.0 in x .96 in
(117.7 mm x 52.5 mm x 24.42 mm)
POWER DELIVERY CHART:
Smartphone (2100 mAh): 2 charges
Tablet (8200 mAh): .5 charges
MP3 Player (1100 mAh): 3.5 charges
Sports CAM (1100 mAh): 3.5 charges
__________________________
WARNINGS:
Read all instructions and warnings prior to using this product.
Improper use of this product may result in product damage,
excess heat, toxic fumes, fire or explosion, for which damages
1
2
3
4
5
6
7
8
9
10
Model # 93548


Produkt Specifikationer

Mærke: Celestron
Kategori: power bank
Model: Elements FireCel Mega 6

Har du brug for hjælp?

Hvis du har brug for hjælp til Celestron Elements FireCel Mega 6 stil et spørgsmål nedenfor, og andre brugere vil svare dig




power bank Celestron Manualer

power bank Manualer

Nyeste power bank Manualer