Celestron Elements FireCel+ Manual

Celestron power bank Elements FireCel+

Læs nedenfor 📖 manual på dansk for Celestron Elements FireCel+ (2 sider) i kategorien power bank. Denne guide var nyttig for 12 personer og blev bedømt med 4.5 stjerner i gennemsnit af 2 brugere

Download PDF
Side 1/2
Thank you for purchasing the Celestron FireCel+! FireCel+ is
an essential multi-use tool designed to be used in the elements.
Its portable, high-capacity power pack can supply power to
your cell phone, MP3 player, and many other USB-powered
devices. A built-in flashlight provides illumination while the
hand warmer keeps you comfortable in cold conditions.
WARNING: Read all instructions and warnings thoroughly
before using FireCel+. Improper use of this product
may result in product damage, excess heat, toxic
fumes, fire or explosion. Do not allow children to
use this product without proper adult supervision.
INCLUDED IN THE BOX ARE:
1 - FireCel
1 - USB Cable with Mini USB connection
1 - Carrying strap
1 - Soft carrying bag
FIRECEL
1. Four super bright LEDs (two red, two white)
2. Six indicator lights
• Four blue LEDs display FireCel+’s battery level
• One green LED indicates a device is being charged
• One red LED indicates heat mode is in use
3. Flashlight on/off button
4. Multi-function button
5. Aluminum heating element
6. Mini USB port
7. USB 2.0 port
1. CHARGING THE INTERNAL LITHIUM
ION BATTERY
Your FireCel+ 3-in-1 device has an internal, 5200 mAh recharge-
able lithium ion battery, which allows for up to 12 hours of continu-
ous heat when using the hand warmer at a constant temperature
of 40° to 45° Celsius (104° to 113° Fahrenheit). FireCel+ also
charges multiple USB-powered devices, and is equipped with a red
and white LED flashlight.
Your FireCel+ ships with a partial charge, but you should charge it
completely before using for the first time.
Follow these steps to charge the internal lithium ion battery:
1. Attach the Mini USB connector end of the included USB cable to
the Mini USB “in” port (6) on your FireCel+.
2. Plug the standard USB plug end of the cable into a USB port on a
PC, laptop, car charger or USB 5V-500mA adapter plug.
3. Once plugged in, the four blue LEDs (2) will start to blink, indi-
cating that charging is in progress.
4. Charging is complete when all four blue LEDs (2) stop blinking.
NOTE: FireCel+ is designed with overcharge protection to prevent
damage to the internal battery.
2. USING THE HAND WARMER FEATURE
• First, press and release the multi-function button (4) to check
the power level. The blue indicator lights will display the current
battery level. (The number of illuminated LEDs corresponds to the
charge level: (1) 25%, (2) 50%, (3) 75%, (4) 100%.)
• Press the multi-function button (4) again to activate one side of
the hand warmer. The green and red indicators will illuminate. In
this mode, you can also charge an external device. See section
3 below.
• Press the multi-function button (4) again to activate both sides of
the hand warmer. Only the red LED indicator will illuminate. You
cannot charge an external device in this mode.
• Press the multi-function button (4) one more time to turn off the
hand warmer.
3. CHARGING AN EXTERNAL DEVICE
• First, press and release the multi-function button (4) to check
the power level. The blue indicator lights will display the current
battery level. (The number of illuminated LEDs corresponds to the
charge level: (1) 25%, (2) 50%, (3) 75%, (4) 100%.)
• Plug your device’s USB charging cable into the USB 2.0 port (7)
on FireCel+.
• Press and release the multi-function button (4) again. The green
indicator light will illuminate and your device should indicate it
is charging.
• When charge is complete, FireCel+ will automatically power off.
To manually stop the charging process, remove the charging
cable from FireCel+.
4. USING THE FLASHLIGHT FEATURE
• Press the flashlight on/off button (3) to turn on flashlight mode
1 (red LEDs only). Continuing to press the flashlight ON/OFF
button (3) will advance through the modes in this order:
1. Red LEDs only
2. White LEDs only
3. Red LEDs blinking
4. White LEDs blinking
5. Red and White LEDs SOS
6. OFF
5. SPECIFICATIONS
BATTERY: 5200mAH/3.7V Rechargeable Lithium Ion
(2 x 2600 mAh)
INPUT VOLTAGE: 5V- 500 mAH to 2A
(Smart Charge Technology)
OUTPUT VOLTAGE: 5V- 1A
PORTS: (1) MINI USB (for charging internal battery)
(1) STANDARD USB 2.0 (for charging external devices)
INTERNAL BATTERY CHARGE TIME
Power supply USB-PC/CC 500mA: 11.0 hours
Power supply 5v/1A/CC 900 mAh: 6.5 hours
Power supply 5V/2A/CC 1.8A: 3.6 hours
MINIMUM NUMBER OF RECHARGES > 500
LED STATUS INDICATORS
(4) Blue LEDs indicate internal battery status
(1) Red LED indicates hand warmer mode
(1) Green LED indicates charging external device
HAND WARMER TEMPERATURE RANGE
40° TO 45° Celsius (104° TO 113° Fahrenheit)
HAND WARMER CONTINUOUS USE TIME
Single Side Mode: 12 hours continuous use
Dual Side Mode: 6 hours continuous use
(Based on fully charged battery)
FLASHLIGHT MODES:
1. Red LEDs only
2. White LEDs only
3. Red LEDs blinking
4. White LEDs blinking
5. Red and White LEDs SOS
OPERATING TEMPERATURE RANGE:
0° to 45° Celsius (32° to 113° Fahrenheit)
STORAGE TEMPERATURE RANGE:
68° to 77° Fahrenheit (optimal)
POWER DELIVERY CHART
iPhone 5s (1540 mAh): 2 hours (2.5 times)
iPhone 4s (1400 mAh): 1.8 hours (2.7 times)
iPhone 3GS/iPod (1200 mAh): 1.5 hours (3.2 times)
HTC WILDFIRE: 1.6 hours (3 times)
WEIGHT: 3.52 oz. (148 grams)
DIMENSIONS: 1.77 in x 3.74 in x .90 in
(45 mm x 95 mm x 23 mm)
NOTE: Storage of more than 6 months without use may have detri-
mental effects on the condition of the lithium ion battery. It is
recommended that you discharge and recharge fully every 3-4
months to maintain optimal battery life.
Rechargeable Hand Warmer
Mobile Device Charger
Multifunction LED Flashlight
No Scent Heat
1
2
3
4 7
5
7 6

Produkt Specifikationer

Mærke: Celestron
Kategori: power bank
Model: Elements FireCel+

Har du brug for hjælp?

Hvis du har brug for hjælp til Celestron Elements FireCel+ stil et spørgsmål nedenfor, og andre brugere vil svare dig


power bank Celestron Manualer

Celestron

Celestron Elements FireCel Mega 6 Manual

29 Juli 2024
Celestron

Celestron Elements FireCel+ Manual

26 Juli 2024
Celestron

Celestron FireCel+ Manual

22 Juli 2024
Celestron

Celestron Elements ThermoTorch 5 Manual

20 Juli 2024
Celestron

Celestron Elements ThermoCharge 6 Manual

27 Januar 2024
Celestron

Celestron ThermoCharge Manual

22 November 2022
Celestron

Celestron PowerTank 18771 Manual

12 November 2022

power bank Manualer

Nyeste power bank Manualer

Bauhn

Bauhn ATAPB-0224 Manual

15 Oktober 2024
GoGen

GoGen PB270001BL Manual

10 Oktober 2024
Einhell

Einhell TE-CP 18 Li USB-Solo Manual

7 Oktober 2024
CyberPower

CyberPower CPBC10400 Manual

7 Oktober 2024
Fresh 'n Rebel

Fresh 'n Rebel 2PB3000CC Manual

7 Oktober 2024
Kogan

Kogan KAPBCMPN50A Manual

1 Oktober 2024
Kogan

Kogan KAPB05L20WA Manual

1 Oktober 2024
Voltcraft

Voltcraft VC-C909 Manual

30 September 2024
Urban Factory

Urban Factory BCA31UF Manual

30 September 2024
Urban Factory

Urban Factory BCA35UF Manual

30 September 2024