Celly CLICKRINGUSBBK Manual

Celly Kamerastativ CLICKRINGUSBBK

Læs nedenfor 📖 manual på dansk for Celly CLICKRINGUSBBK (30 sider) i kategorien Kamerastativ. Denne guide var nyttig for 14 personer og blev bedømt med 4.5 stjerner i gennemsnit af 2 brugere

Download PDF

Side 1/30

Read this user manual and

especially the safety notes

before using the product.

Keep the user manual for

future reference and include it when

passing the product to a third party.

Esprinet S.p.A. will in no way be held

responsible for injuries or damage

caused to people or things resulting from

improper use of the product.

Notes on safety

Do not use the product if it is damaged.

Never touch the product with wet or damp

hands.

Use the product indoors only. Do not use

in humid environments or in the rain.

Do not insert metal objects such as keys

or paper clips into the product openings.

To prevent malfunction or damage to the

product, avoid accidental falls, do not

crush, puncture or exert a high level of

pressure on the product.

Keep away from moisture, water or other

liquids. If the product comes into contact

with water, moisture or other liquids,

do not use it to avoid electric shock or

damage.

Do not store or expose the product to

heat sources, direct sunlight, radiators,

stoves or other heat sources such as the

car dashboard in summer.

Never use the product unsupervised.

During operation, the housing may

overheat. Do not cover the product during

use. Never use the product when changing

from a cold to a warm environment.

Condensation may occur and, in some

cases, damage the product.

Allow the product to reach room

temperature before connecting and using

it again. It may take several hours.

Usage temperature: 0–40 ° C.

Do not attempt to modify, repair

or disassemble the product. Risk of

explosion! Do not use a damaged product.

Stop using the product immediately if you

notice any swelling, dispersion or other

abnormality.

Never use aggressive detergents, alcohol

or other chemical solutions for cleaning

as they can damage the housing or even

compromise the functionality of the

product.

Disconnect all connected cables before

starting cleaning. Do not immerse the

product in water or other liquids.

ere are no serviceable parts inside the

product. Never open / disassemble it.

Keep the product out of the reach of

children. Do not allow children or people

with disabilities to use electrical products

without supervision. Make sure children do

not play with the plastic wrap. ey could

swallow it while playing and choke.

Make sure that the cable provided for

powering the product is intact and does

not short-circuit the charging ports.

Warnings

1. e outlet must be installed close to

the equipment and easily accessible. Keep

out of reach of children. Do not open or

damage the device. Keep away from water

and heat.

2. Before powering up the device, make

sure that the technical characteristics

(Voltage, output and amperage) are

compatible with the product.

Do not use this product with a damaged

adapter or a damaged cable.

3.is product should be used indoors

only.

4. While the LED light is on, do not directly

illuminate the eyes from a close distance

to prevent eye injury.

5. is product may turn on or oﬀ under

strong electromagnetic waves.

7. e light source of this lamp cannot

be replaced, when the light source ends

its life cycle, the whole lamp should be

replaced.

8. is product can tip over if not used on

ﬂat surfaces, check before use.

Instructions for Use

ON \ OFF

Connect the supplied USB power cable

to a safe power outlet, then the remote

control connected to the wire will cause

the lamp power button to light up blue,

press it to switch on.

Once you have ﬁnished using it, turn oﬀ

the LED light with the oﬀ button and

disconnect the USB cable from the power

outlet.

Cleaning

Disconnect all cables before cleaning. If

necessary, clean the lamp with a damp

cloth and allow it to dry completely

before use. Use a clean brush with soft,

long bristles to remove dust from the

connectors. Do not use solvents, corrosive

or gaseous detergents. Make sure that no

water or other liquids enter the housing.

storage

Store the product in a clean and dry area.

Keep it away from direct sunlight.

Disposal of the product

(Applicable in countries with

separate collection systems of

recyclable materials)

Old products may not be disposed of in

the household waste! Should the product

no longer be capable of being used

at some point in time, dispose of it in

accordance with the regulations in force

in your country. is ensures that old

products are recycled in a professional

manner and also rules out negative

consequences for the environment.

For this reason, electrical equipment is

marked with the symbol shown here.

Technical speciﬁcations

Input: DC 5V / 2A

Maximum lighting power: 12W

Brightness temperature: 3200-4500-

5500K

Led ﬁle: 3 colors / 9 rows

LED number: 160

Dimension of the light ring: 12 "-

30.5x30.5x3.5 cm

Light ring weight: 390gr

Tripod size: 57.5x6.9x6.2cm

Tripod weight: 440gr

Phone size up to: 4-6.5 "

Total weight: 830gr

Maximum extension of the tripod: 160 cm

Working temperature: 0–40 ° C.

is product complies with RoHS

2011/65 / EU - RoHS 2015/863

/ EU. e product carries the CE

mark and complies with the safety

standards established by the European

Union.

Celly® is a trademark owned by CELLY

S.p.A.

All brands are registered trademarks of

their respective owners.

Esprinet S.p.A., via Energy Park

20, 20871 Vimercate (MB) -

Italy

Made in China.

User manual

TRIPOD WITH LED LIGHT

Model: CLICKRINGUSBBK

Rev02 - 19.03.2021

Produkt Specifikationer

Mærke:	Celly
Kategori:	Kamerastativ
Model:	CLICKRINGUSBBK
Højde:	860 mm
Vægt:	850 g
Produktfarve:	Sort
Kabler inkluderet:	USB
Diameter:	305 mm
Lyskildeteknologi:	LED
Gevinddiameter:	305 mm