Celly Mini1 Manual


Læs nedenfor 📖 manual på dansk for Celly Mini1 (43 sider) i kategorien Hovedtelefon. Denne guide var nyttig for 22 personer og blev bedømt med 4.5 stjerner i gennemsnit af 2 brugere

Side 1/43
Read this user manual and in
particular the safety notes,
before using the product.
Keep the user manual for future
reference and include it when passing the
product on to third parties.
Esprinet S.p.A. will not in any way be held
responsible for injury or damage caused to
persons or property arising from misuse of
the product.
Warnings
Avoid listening at extreme volumes,
particularly for prolonged periods of time
when using the product.
If you use the product at an excessively high
volume, you could permanently damage your
hearing. Listen at a moderate volume.
Audio warnings, alerts and environmental
noises may sound different when wearing the
product.
Be aware of how these signals differ in terms
of their sound so that you are able to recognize
the signals in corresponding situations.
Do not use the product when driving motor
vehicles, cycling, when operating machines or
in other situations where impaired awareness
of noises in your surroundings could pose a
risk to you or others. At the same time, also
observe the legal regulations and provisions in
the country where you use the product.
To prevent malfunction or damage to the
product, avoid accidental falls, do not crush,
puncture or exercise a high level of pressure
on the product.
Keep the product away from humidity, water
or other liquids.
Do not store or expose your product to any
source of heat, direct sunlight, radiators,
stoves or other heat sources such as the
dashboard of your car in the summer.
Do not try to modify, repair or disassemble the
product. Do not use a damaged product.
Do not under any circumstances use
aggressive cleaning agents, alcohol or other
chemical solutions for cleaning as they can
damage the housing or even impair the
functionality of the product.
Do not immerse the product in water or other
liquids.ere are no serviceable parts inside
the product. Never open/disassemble it.
Keep the product out of reach of children.
Never allow children or persons with
disabilities to use electrical products without
supervision. Make sure that children do not
play with the plastic wrapping. ey may
swallow it when playing and suffocate.
Make sure children do not remove any small
parts from the product and play with them.
Charging
When using for the first time, charge the
battery to maximum capacity. To recharge,
plug the charging cable into the product's
charging port. e red light at the bottom of
the charging box indicates that charging is in
progress. When the light turns green, charging
of the charging box is complete.
It is possible to see the charging status of the
charging box by briefly pressing the button at
the bottom of the box.
Led indicator:
Flashing red light: charge <20%
Flashing orange light: charge between 20%
and 80%
Flashing green light: charged> 80%
Once the earphones are placed inside the
charging box, charging will begin and a white
light will light up on each. When the white light
goes out, the earphones will be fully charged.
Turning on and pairing
e earphones, once you open the case, will
turn on automatically. e earphones must
be connected to the device within 5 minutes,
otherwise they will go into power saving
mode. To activate the pairing mode again,
simply place the earphones in the charging
case, close it and wait a few seconds before
reopening it, following the above procedure
again. Now activate the Bluetooth® function
on the device, search for MINI1, select it
once identied and connect it. You will hear
the "CONNECTED" sound when pairing is
completed. If prompted for a password, enter
"0000".
Automatic reconnection
Once the headset and device have been paired
once, they will automatically reconnect when
your device's Bluetooth® is turned on and
within range.
Reset:
It is possible to reset the product by pressing
the button at the bottom of the charging box
for 6 seconds. A flashing white light will come
on. When the light stops flashing, the reset is
complete. Please keep the charging case open
during this procedure
MONO/STEREO function
You can use only one earbud to listen to
music and to take calls. is function (MONO
function) is available for both earbuds. To use
this function remove one earbud from the
charging box. To switch to the stereo mode,
remove at any time the second earbud.
Viceversa to switch to the mono mode, put
back one earbud in the charging box.
Multifunction buttons
Auto power off
1. If connected to a device, after disconnecting
the Bluetooth® connection, the headset will
automatically turn oafter 2 minutes.
2. If you don't connect your phone when
the white light flashes, the headset will
automatically turn oin 2 minutes.
Pairing between left and right earphones
If the connection between the left and right
earphones is lost, put both earphones back
inside the charging box, close it and wait a few
seconds before reopening it. e earphones
will automatically re-connect to each other.
If the process just described does not work,
disconnect the earphones from your device,
wait a few minutes, then reconnect them (the
earphones must be placed inside the charging
box). For both procedures, it is necessary
that the earphones inside the charging box
are charging, so make sure that the charging
box has a sufficient charge level to ensure the
charging of the earphones.
Maintenance
1. Do not use abrasive solvents to clean the
product;
2. Do not attack the product with any kind of
sharp object as it may scratch or damage the
product;
3. Keep the product away from high
temperatures, dust and humidity.
Specifications:
Bluetooth® version: 5.0
Software: fw5000
Earphone charging time: 1.5h
Charging box charging time: 1.5h
Earphones battery: Li-polymer Battery
35mAh/3.7V, 0.13Wh
Charging box battery: Li-polymer Battery
300mAh/3.7V, 1.11Wh
Microphone sensitivity: -42 ± 1.5dB
Frequency response: 20Hz ~ 20KHz
Rated power: 6mW
Maximum power: 10mW
Operating range: 10m
Talk time: 2.5h
Music time: 2.5h
Standby time: 70h
Earphones size: 29.65x17.52x18.4mm
Charging box dimensions:
45x22.41x45.74mm
Temperature of use: 0 ~ 40°C
Single earphone weight: 3.2g
Charging box weight: 24g
Maximum radiated power: <20mW
Frequency range: 2,4GHz - 2,4836GHz
CUSTOMER’S INFORMATION FOR
RIGHT WASTE OF THIS PRODUCT
(Directive 2013/56/EU)
is marking on the product or its packaging
means that the product at the end of its life,
inlcuding the unremovable battery, must
be separated from other types of waste to
recycle it responsibly.
Safely’s use of this product is guaranteed from
the respect of this instructions manual, keep it
and carefully use it for all life of the product.
e product doesn’t need any kind of technical
maintenance, NEVER DISASSEMBLE IT.
e battery inside the product is integrated
and not replaceable. Don not try to remove
li-ion/polymer battery included in inside the
product because can produce overheats
danger, burning and injury. e battery must
be removed only by qualied professional
techincians, that are able to remove it without
any kind of danger and to recycle it in the
respect of the law. Users should give free end
of life product into the local separate collection
centers or to the retailer, in reason of one to
one, or free if the product size is bigger than
25 cm. Adequated waste disposal permit to
award the product to recycling, treatment
with ecofriendy compatible disposal conduce
to prevent possible harm to the environment
or human health and promote the reuse and/
or product materials recycling. Unauthorized
waste disposal of electronic product, cell and
battery from houseold user involve currency
legislation sanctions.
is product complies with RoHS
2011/65 / EU - 2015/863 / EU.
e Product has the CE mark and
therefore complies with the safety standards
established by the European Union.
Esprinet SpA declares that the product
complies with directive 2014/53 / EU. e
full text of the EU declaration of conformity
is available at the following Internet address:
www.celly.com/Exchange/CELLY-SPA/
Dichiarazioni_di_conformita/MINI1/DOC_
MINI1.pdf
Celly® is a trademark owned by CELLY
S.p.A.
All brands are registered trademarks of
their respective owners.
Esprinet S.p.A., via Energy Park
20, 20871 Vimercate (MB) -
Italy
Made in China.
User manual
BLUETOOTH® EARPHONES
Model: MINI1
Rev 00 - 15.02.2021
Left earphone (L) Right earphone (R)
Play/pause Single click Single click
Reply/end calls Double click Double click
Refuse calls Long press Long press
Previous track Double click //
Next track // Double click
Volume - Long press //
Volume + // Long press
Voice assistant Triple click Triple click
EN


Produkt Specifikationer

Mærke: Celly
Kategori: Hovedtelefon
Model: Mini1
Vægt: 30 g
Produktfarve: Sort
Kontroltype: Berøring
Produkttype: Headset
Bluetooth: Ja
USB-stik: USB Type-C
Antal: 1
Kabler inkluderet: USB Type-C
Pakketype: Hængende boks
Anbefalet brug: Opkald/musik
Impedens: 42 ohm (Ω)
Forbindelsesteknologi: Trådløs
Bæremåde: I ørerne
Mikrofontype: Indbygget
Batteritype: Indbygget batteri
Opladningstid for batteri: 1.5 t
Trådløs rækkevidde: 10 m
Mikrofon sensitivitet: -42 dB
Ørekobling: Intraaural

Har du brug for hjælp?

Hvis du har brug for hjælp til Celly Mini1 stil et spørgsmål nedenfor, og andre brugere vil svare dig




Hovedtelefon Celly Manualer

Hovedtelefon Manualer

Nyeste Hovedtelefon Manualer