Cotech FIB72800v1-PT Manual

Cotech Lys FIB72800v1-PT

Læs nedenfor 📖 manual på dansk for Cotech FIB72800v1-PT (5 sider) i kategorien Lys. Denne guide var nyttig for 16 personer og blev bedømt med 4.5 stjerner i gennemsnit af 2 brugere

Side 1/5
UNITED KINGDOM CUSTOMER SERVICE
tel 020 8247 9300 customerservice@clasohlson.co.uk www.clasohlson.co.uk 10 13 Market Place, Kingston Upon Thames, Surrey, KT1 1JZe-mail internet postal
A
E
F
D
B C
Ver. 20190226
LED Grow Light
Art.no 36-7303 Model FIB72800v1-PT
Please read theentire instruction manual before using theproduct and then
save it for future reference. We reserve theright for any errors in text or images
and any necessary changes made to technical data. In theevent of technical
problems or other queries, please contact our Customer Services.
Safety
Warning:
Do not use thelight if it or its mains lead and plug are damaged in any way.
Thelight should only be connected to awall outlet with a230 V, 50 Hz power
supply.
Do not mount thelight in anenvironment where it is exposed to water,
moisture or extreme temperatures.
Never try to open theproduct, repair or modify it in any way.
Electric shock hazard
Thebulb in this light fitting must only be replaced by aqualified electrician.
Installation and maintenance work on theproduct involves therisk of
anelectric shock.
If themains lead is damaged it must be replaced by a cable of identical
specifications as theoriginal.
Connecting the lights using a connection cable
This product is intended for
indoor use only.
Product description
A) Ceiling bracket ×2
B) Screw ×2
C) Wall plug ×2
D) Connector ×1
E) Mains lead ×1
F) Series connection
cable ×1
1. Mount theceiling
bracket (A) using
thescrew (B).
Use amasonry
drill and wall
plug (C) to create
ananchor hole if
necessary.
2. Press thelighttting into
thebrackets until it clicks
into place.
Ceiling bracket (A)
3. Plug themains lead into awall socket.
Connecting several lights together
Up to 10 lightttings can be interconnected. There are two different ways of
connecting thelights together:
1. Thefirst is with aconnector, which enables thelights to be joined end to end.
2. Thesecond is using aseries connection cable, which enables thelights to be
joined about 10 cm apart (handy for corner mounting).
Connecting the lights using a connector
1. Push thesupplied connector (D) into themains socket on
thelighttting.
2. Connect thetwo lights together. Make sure that theconnector
is securely inserted and that both lights are securely
connected to each other.
3. Repeat thesame procedure if you wish to connect
additional lights.
1. Use thesupplied series connection
cable (F) to connect thefirst light to
thesecond.
2. Repeat thesame procedure
if you wish to connect
additional lights.
Care and maintenance
Thelighttting should be cleaned using adry cloth or vacuum cleaner.
Unplug thelighttting from thewall socket if theproduct is not be used for
anextended period.
Instructions for use
Note
Theintensity of thelight is inversely proportional to thesquare of Distance:
thedistance from thesource, which means that if you double thedistance
between thelight and anobject, only aquarter of thelight will reach
theobject. It is therefore important that thelights are as close as possible to
theplants and equally spaced.
Most plants grow better when not exposed to Plant illumination time:
24-hour light, they also require aperiod of darkness. We recommend that
thegrow light is used with atimer.
Installation
Warning:
Ensure that there are no electrical wires or water pipes in theceiling or wall
where you intend to drill/screw.
Switch thelighttting on and off by
pressing thepower switch.
Troubleshooting guide
Thelight
doesn’t
come on.
Check that thelight is turned on.
Make sure that themains lead is undamaged and is securely
connected to both thewall socket and thelight.
Is thewall socket energised?
Check that any interconnected lights are intact and properly
connected to each other.
Responsible disposal
This symbol indicates that this product should not be disposed of
with general household waste. This applies throughout theentire EU.
In order to prevent any harm to theenvironment or health hazards
caused by incorrect waste disposal, theproduct must be handed in
for recycling so that thematerial can be disposed of in aresponsible
manner. When recycling your product, take it to your local collection
facility or contact theplace of purchase. They will ensure that
theproduct is disposed of in anenvironmentally sound manner.
Specifications
Rated voltage 220–240 V AC, 50/60 Hz
Mains lead 1.8 m
Bulb LED
Photosynthetic photon flux
PPF 25 μmol/s
3 μmol/JPPF/W
Class II luminaire.
Thelight bulb is not dimmable.
Handy tip
It is agood idea to connect thelighttting/s
to awall socket which is controlled by an
on/off switch.
Series connection
cable 15 cm
Wattage 8.5 W
IP rating IP20
Operating
temperature −30 ºC to +40 ºC
Dimensions 58×3.9×2.3 cm


Produkt Specifikationer

Mærke: Cotech
Kategori: Lys
Model: FIB72800v1-PT

Har du brug for hjælp?

Hvis du har brug for hjælp til Cotech FIB72800v1-PT stil et spørgsmål nedenfor, og andre brugere vil svare dig




Lys Cotech Manualer

Cotech

Cotech 36-4272 Manual

18 April 2024
Cotech

Cotech IPC15A1A Manual

15 April 2024
Cotech

Cotech LY9601H Manual

14 Februar 2024
Cotech

Cotech 36-8550 Manual

12 Februar 2024
Cotech

Cotech JF8100-5 Manual

13 December 2023
Cotech

Cotech 36-6776 Manual

27 November 2023
Cotech

Cotech HK-LB644A-HSV Manual

22 November 2023
Cotech

Cotech SL2882 Manual

11 November 2023
Cotech

Cotech DL25Q-W009A0-127 Manual

26 September 2023

Lys Manualer

Nyeste Lys Manualer

Aputure

Aputure LS 600C Pro Manual

19 November 2024
Neno

Neno Titto Manual

19 November 2024
V-TAC

V-TAC VT-25W Manual

18 November 2024
Yongnuo

Yongnuo YN508 Manual

17 November 2024
Eurolite

Eurolite PAR-30 Manual

17 November 2024
Petzl

Petzl Bindi Manual

16 November 2024