Cotech HK-LB644A-HSV Manual

Cotech Lys HK-LB644A-HSV

Læs nedenfor 📖 manual på dansk for Cotech HK-LB644A-HSV (5 sider) i kategorien Lys. Denne guide var nyttig for 13 personer og blev bedømt med 4.5 stjerner i gennemsnit af 2 brugere

Side 1/5
UNITED KINGDOM CUSTOMER SERVICE
tel 020 8247 9300 customerservice@clasohlson.co.uk www.clasohlson.co.uk 10 13 Market Place, Kingston Upon Thames, Surrey, KT1 1JZe-mail internet postal
1
2
3
1 m
6
5
4
7
Ver. 20180917
30 W LED Work Light with
2 x 230 V Power Take-Off Sockets
Art.no 18-1326 Model HK-LB644A-HSV(UK)
36-6501 HK-LB644A-HSV
Please read theentire instruction manual before using theproduct and then
save it for future reference. We reserve theright for any errors in text or images
and any necessary changes made to technicaldata. If you have any questions
concerning technical problems please contact our Customer Services.
Safety
Make sure that theelectrical socket that theproduct is plugged into is
easily accessible in case it and theconnected product need to be quickly
disconnected from themains electricity.
Do not connect products of this type to each other.
Do not cover theproduct.
TheLEDs in this work light have avery intensive light output. Donot let
children play with theworklight. Donot look directly into thelight or direct
thelight into another person’s eyes, doing so could cause eye damage.
Do not touch thehousing or glass of thework light when it is switched on
– risk of burn injury.
Do not install thework light near flammable materials or surfaces.
Do not cover theworklight.
Do not dismantle or modify theworklight.
Themains lead should be checked regularly. Neveruse thework light if
themains lead or plug is damaged.
Always unplug thework light from thepower point when it is not inuse.
Pulltheplug, not thelead.
Themains lead must be changed if damaged. Thisis to prevent therisk of
electric shock or fire and should only be carried out by themanufacturer,
authorised service facility or aqualified tradesman.
Thework light is suitable for use in temperatures between −20 and +40 °C.
Thework light should be connected to anearthed 230 V powerpoint.
Check before use that thehousing, glass, power switch, mains lead and
plug are all undamaged. Anyfault or damage must be repaired immediately
by aqualified electrician before thework light isused.
Do not use thework light near combustible or explosive liquids, solids orgases.
Thework light must only be used when it is mounted on theincluded base
and bracket assembly. Thework light must not be mounted on awall orceiling.
Treat thework light with care and do not subject it to shocks or impacts.
Thework light must not be immersed in water or other liquid.
If the mains lead is damaged in any way it must be replaced by
a qualified electrician.
Care and maintenance
Unplug thework light and allow it to cool before cleaning.
Clean thelight using asoft, dampcloth. Useamild detergent.
Neveruse solvents or strong, abrasive cleaning agents.
Product description
Operating instructions
1. Connect themains lead to a230 V powerpoint.
2. Adjust thelamp housing to thedesiredangle.
3. Switch thework light on using thepower switch (6).
4. Switch off and unplug thework light afteruse.
1. Base
2. Bracket
3. Handle
4. Locking screws (star knob)
5. Lamphousing
6. Powerswitch
7. 2×230V power socket, max 10 A
Assembly instructions
Attach thebracket and thehandle (3)
to thebase(1) using two locking screws(4).
Responsible disposal
This symbol indicates that this product should not be disposed
of with general householdwaste. Thisapplies throughout
theentire EU. Inorder to prevent any harm to theenvironment
or health hazards caused by incorrect waste disposal,
theproduct must be handed in for recycling so that thematerial
can be disposed of in aresponsible manner. Whenrecycling
your product, take it to your local collection facility or contact
theplace of purchase. Theywill ensure that theproduct is
disposed of in anenvironmentally sound manner.
Power take-off sockets
Power tools with acombined total power load of 2300W can be connected to
thetwo power sockets on therear of theworklight. Thepower switch (6) Note:
only controls thework light, not thepower take-off sockets.
Specifications
Voltage 230V, 50/60Hz
Power 30W
Light source COB/Bridgelux LED
Luminousflux 3000lm
Colour temperature 4000K
Colour rendition > 80 Ra
Beamangle 120°
Ingress protection IP54
Power sockets Max2300W (10A) total load
Protectionclass Class1 (this lighttting must be earthed)
Cable 1.8m rubber clad cable with earthed plug
(H07RN-F 3×1.0 mm²)
Size 220×185×210mm
Thelight source contained in this luminaire shall only
be replaced by a qualified electrician.


Produkt Specifikationer

Mærke: Cotech
Kategori: Lys
Model: HK-LB644A-HSV

Har du brug for hjælp?

Hvis du har brug for hjælp til Cotech HK-LB644A-HSV stil et spørgsmål nedenfor, og andre brugere vil svare dig




Lys Cotech Manualer

Cotech

Cotech 36-4272 Manual

18 April 2024
Cotech

Cotech IPC15A1A Manual

15 April 2024
Cotech

Cotech LY9601H Manual

14 Februar 2024
Cotech

Cotech 36-8550 Manual

12 Februar 2024
Cotech

Cotech JF8100-5 Manual

13 December 2023
Cotech

Cotech 36-6776 Manual

27 November 2023
Cotech

Cotech HK-LB644A-HSV Manual

22 November 2023
Cotech

Cotech SL2882 Manual

11 November 2023
Cotech

Cotech DL25Q-W009A0-127 Manual

26 September 2023

Lys Manualer

Nyeste Lys Manualer

Nanlite

Nanlite D672BII Manual

19 December 2024
Nanlite

Nanlite Compac 40 Manual

19 December 2024
Nanlite

Nanlite MixPad II 11C Manual

18 December 2024
Nanlite

Nanlite D672II Manual

18 December 2024
Chauvet

Chauvet WELL POD 2X6 Manual

17 December 2024
Luxli

Luxli ORC-VIOLA-M2 Manual

17 December 2024
Makita

Makita DML817 Manual

16 December 2024
Makita

Makita MT001 Manual

16 December 2024