Elba ETM-E3920 Manual
Læs nedenfor 📖 manual på dansk for Elba ETM-E3920 (1 sider) i kategorien Vandhane. Denne guide var nyttig for 12 personer og blev bedømt med 4.5 stjerner i gennemsnit af 2 brugere
Side 1/1
A Tap Body
B Rubber O-ring
C Sink top or Work top
D Rubber O-washer
E Metal O-washer
F Threaded fixing bushing
G Flexi bose
H Rubber O-ring for flexi hose
1. An opening hole of 35mm diameter is required on sink top or work top for installation of tap.
2. Slide the rubber O-ring (B) over the threaded tube and up to the base of tap (A).
3. Insert the threaded tube through the hole of sink top or work top (C) and position the tap properly.
4. Slide the rubber O-washer (D) and metal O-washer (E) over the threaded tube and up to the underside of
sink top or work top (C).
5. Screw the fixing bushing (F) up to the metal O-washer (E).
6. Connect the flexi hoses (G) to the extension tube on one end and the hot or cold water supply on the other
end. Please ensure that the hot water supply goes through the hot flexi hose while the cold water supply goes
through the cold flexi hose.
(C)
ETM-E3820
●Before installation, please ensure that the following work
conditions are adhered to:
-Water temperature between 0 C - 90 C˚ ˚
-Water pressure between 0.05MPa – 1.0MPa. Pressure reducing
valve is necessary if pressure exceeds 1.2MPa
-Avoid major pressure differences between hot and cold water
supply
●Flush pipes thoroughly before and after installation to ensure
water supply is free of any debris.
●Inspect tap fitting and debugged to its best. Do not attempt to
disassemble fitting on your own.
●Use thread sealant tape (PTFE) on any screw joining
connections and ensure all joints are securely tightened.
ETM-E3320 ETM-E2920 ETM-E3920
This . FIAMMA SDN. BHD. will not be held responsible for the use of superseded or voided specifications.
Fabricatoe must check for cut-out accuracy.
specification is subject to change without notice
Stainless Steel Mixer Tap
Produkt Specifikationer
| Mærke: | Elba |
| Kategori: | Vandhane |
| Model: | ETM-E3920 |
Har du brug for hjælp?
Hvis du har brug for hjælp til Elba ETM-E3920 stil et spørgsmål nedenfor, og andre brugere vil svare dig
Vandhane Elba Manualer
19 August 2024
19 August 2024
19 August 2024
19 August 2024
19 August 2024
Vandhane Manualer
- Vandhane Ikea
- Vandhane Siemens
- Vandhane Concept
- Vandhane Teka
- Vandhane Ernesto
- Vandhane Etna
- Vandhane Hansgrohe
- Vandhane Smeg
- Vandhane Miomare
- Vandhane KitchenAid
- Vandhane Svedbergs
- Vandhane Caple
- Vandhane Franke
- Vandhane Brita
- Vandhane Damixa
- Vandhane Oras
- Vandhane Grohe
- Vandhane Netatmo
- Vandhane Inventum
- Vandhane CDA
- Vandhane Mueller
- Vandhane Oliveri
- Vandhane Delta
- Vandhane Elkay
- Vandhane Moen
- Vandhane Suprema
- Vandhane American Standard
- Vandhane Puretec
- Vandhane Sussex
- Vandhane Zurn
- Vandhane Karran
- Vandhane Jacuzzi
Nyeste Vandhane Manualer
3 December 2024
3 December 2024
2 December 2024
2 December 2024
2 December 2024
26 November 2024
26 November 2024
26 November 2024
26 November 2024
25 November 2024