Hive Thermostat Stand Manual

Hive Smart hjem Thermostat Stand

Læs nedenfor 📖 manual på dansk for Hive Thermostat Stand (2 sider) i kategorien Smart hjem. Denne guide var nyttig for 6 personer og blev bedømt med 4.5 stjerner i gennemsnit af 2 brugere

Side 1/2
Remember: If the thermostat is positioned in the same room
as a radiator controlled by a thermostatic radiator valve (TRV)
this may prevent the thermostat from being able to reach its
target temperature and may result in the central heating being
permanently on.
© 2017 Centrica Connected Home Limited.
Registered in England (No. 5782908).
Registered office: Millstream, Maidenhead Road,
Windsor, Berkshire SL4 5GD. All rights reserved.
Choosing a location for your thermostat
Aim for around 1–1.5m from the floor and away from heat sources
such as radiators and direct sunlight. To make accurate temperature
readings, your thermostat needs a free flow of air so please ensure
you place in an area not covered by curtains or similar objects.
How to fit the Hive thermostat to yourstand
1 Remove the back plate of
the thermostat by pressing
the lever at the bottom and
pulling away from the front
of the device.
2 Hook the thermostat
onto the stand back
plate and click it in place.
Press tab to open
UG70007300517
Fitting instructions overleaf
hivehome.com


Produkt Specifikationer

Mærke: Hive
Kategori: Smart hjem
Model: Thermostat Stand

Har du brug for hjælp?

Hvis du har brug for hjælp til Hive Thermostat Stand stil et spørgsmål nedenfor, og andre brugere vil svare dig




Smart hjem Hive Manualer

Smart hjem Manualer

Nyeste Smart hjem Manualer