Inkbird IBS-M1 Manual

Inkbird Smarth home IBS-M1

Læs nedenfor 📖 manual på dansk for Inkbird IBS-M1 (2 sider) i kategorien Smarth home. Denne guide var nyttig for 4 personer og blev bedømt med 4.5 stjerner i gennemsnit af 2 brugere

Download PDF

Side 1/2

Inkbird IBS-M1

Wi-Fi Gateway

Introduction

01 Product Features

The Wi-Fi Gateway can be used in

conjunction with relevant Bluetooth

thermometers and hygrometers or Wireless

thermometers and hygrometers to help

those equipment to connect to the server

through Wi-Fi. Download and install Inkbird

Pro app for free, then all connected

equipment can be controlled on your phone.

Part of Bluetooth Connection Equipment

Models: IBS-TH1, IBS-TH1 Mini,

IBS-TH1 Plus, IBS-P01B

Part of Wireless Connection Equipment

Models: ITH-20R-O, IBS-P01R-O

Note: Maximum 4 equipment at one time.

Input Voltage: DC 5V, 1000mA

Maximum Bluetooth Connection Distance:

98ft(the distance will be shorter if there are

interferences)

Wireless transmission frequency: 433Mhz

Maximum Wireless Connection Distance:

300ft(the distance will be shorter if there

are interferences)

Maximum 4 equipment at one time

Warranty: 1 year

Wi-Fi Connection

3.1 Get a free app for your phone

Get the Inkbird Pro app or IBS-M1 app from

Google Play or App Store for free, or you can

scan the QR code to download the app you

want directly.

●

Inkbird Pro enables you to control more than

one Inkbird product on your phone, including

but not limited to IBS-M1 Wi-Fi Gateway.

IBS-M1 app is specially built for IBS-M1

Wi-Fi Gateway.

You could control the IBS-M1 Wi-Fi Gateway

on your phone with either of them, just

choose an app according to your needs.

3.2 Connect to your phone

1. Register before using the Inkbird Pro app.

Select your Country/Region, enter your

phone number or e-mail, then a verification

code will be sent to you, enter it to confirm

your identity and the registration is done.

2. Open the app and click “+” to start the

connection.

3. Plug in the Inkbird Wi-Fi Gateway, the

Wi-Fi button will flash rapidly by default,

confirm it on your app when promoted, then

enter your Wi-Fi password to connect to

wireless network, click OK to connect the

device.

4. Connection succeed.

Note: Please skip Section 3.3 if you have

already connected your Wi-Fi gateway to

the Wi-Fi network successfully, the Section

3.3 is prepared for customers who have

special needs or can not connect their Wi-Fi

gateway in this mode.

3.3 Connect the device in AP mode

If the Wi-Fi gateway is not connected to your

phone, the light of Wi-Fi button will flash

rapidly by default. Press and hold the button

for about 5 seconds to switch to AP mode,

the light of Wi-Fi button will flash slowly in

the mode 5 seconds later.

1. Open the app and click “+” to start the

connection.

2. Plug in the Inkbird Wi-Fi Gateway, choose

the IBS-M1 Wi-Fi gateway , click “AP Mode”

of the right top corner, check if the light of

Wi-Fi button is blinking slowly and confirm

on your app if it is, then enter your Wi-Fi

password to connect to wireless network,

click OK to connect the device.

3. The app will redirect to your phone’s

WLAN Setting interface, select the

“SmartLife-XXXX” to directly connect to the

router without typing in password. Go back

to the app and enter the automatic

connection interface to click “Done”.

4. Connection succeed.

3.4 Wi-Fi Reset

Press and hold the “Wi-Fi” button for 5

seconds to reset the Wi-Fi, then repeat the

steps above to connect with your phone.

The device only supports 2.4GHz Wi-Fi

router.

IBS-M1

Wi-Fi ButtonReset Button

iOS Android

Scan QR code to download

Inkbird Pro APP

iOS Android

Scan QR code to download

IBS-M1 APP

3.5 Main Interface of the IBS-M1 Wi-Fi

Gateway on Inkbird Pro

A. Model of the Wi-Fi Gateway device

B. Connection status

C. Model and the picture of the Sensor 1

D. Instant temperature of the internal probe

E. Instant temperature of the external probe

F. The graph of temperature and humidity

G. Basic information of the Wi-Fi Gateway

device

H. Switchable temperature unit

I. Battery capacity

J. Instant humidity of the internal probe

K. Settings for Sensor 1

B H

Produkt Specifikationer

Mærke:	Inkbird
Kategori:	Smarth home
Model:	IBS-M1

Har du brug for hjælp?

Hvis du har brug for hjælp til Inkbird IBS-M1 stil et spørgsmål nedenfor, og andre brugere vil svare dig

Dit navn*

Din email*

Skriv dit spørgsmål her

Smarth home Inkbird Manualer

Inkbird IBS-M1 Manual

1 September 2024

Smarth home Manualer

Nyeste Smarth home Manualer

Salus CSB600 Manual

19 September 2024

KlikaanKlikuit ICS-200 Manual

18 September 2024

Elro SF40RE11 Manual

17 September 2024

Panasonic KX-HNC301 Manual

16 September 2024

Smartwares SH5-RPS-04A Manual

15 September 2024

Home Easy HE850 Manual

14 September 2024

Chacon 54739 Manual

14 September 2024

Brennenstuhl BrematicPRO APWT868 01 IP44 Manual

14 September 2024

Niko 100-69500 Manual

13 September 2024

Busch-Jaeger 6702 Manual

13 September 2024