JUNG 4192 TSM Manual

JUNG Smart hjem 4192 TSM

Læs nedenfor 📖 manual på dansk for JUNG 4192 TSM (5 sider) i kategorien Smart hjem. Denne guide var nyttig for 24 personer og blev bedømt med 4.5 stjerner i gennemsnit af 2 brugere

Download PDF

Side 1/5

Universal push-button module

Universal push-button module, 1-gang

Art. No. : 4191 TSM

Universal push-button module, 2-gang

Art. No. : 4192 TSM

Universal push-button module, 3-gang

Art. No. : 4193 TSM

Universal push-button module, 4-gang

Art. No. : 4194 TSM

Operating instructions

1 Safety instructions

Electrical equipment may only be installed and fitted by electrically skilled persons.

Failure to observe the instructions may cause damage to the device and result in fire and

other hazards.

Use only the enclosed plastic screws for fastening to the supporting frame! Otherwise

safe operation cannot be ensured. Electrostatic discharges can cause defects in the

device.

These instructions are an integral part of the product, and must remain with the end

customer.

2 Function

System information

This device is a product of the KNX system and complies with the KNX directives. Detailed

technical knowledge obtained in KNX training courses is a prerequisite to proper understanding.

The function of this device depends upon the software. Detailed information on loadable

software and attainable functionality as well as the software itself can be obtained from the

manufacturer´s product database. Planning, installation and commissioning of the device are

carried out with the aid of KNX-certified software. The latest versions of product database and

the technical descriptions are available on our website.

Intended use

- Operation of loads, e.g. light on/off, dimming, blinds up/down, brightness values,

temperatures, calling up and saving light scenes, etc.

- Installation in appliance box according to DIN 49073

Product characteristics

- The pushbutton functions switching, dimming, controlling blinds, value transmitter, calling

up moods, etc.

- Measurement of the room temperature

- Completion with keyset

- Two red status LEDs for each button

- A blue operation LED as an orientation light and to indicate the programming status

- Integrated bus coupling unit

- One, two or three functions per button

- Push-button function or rockers function, vertical or horizontal

- Connection of push-button extension module to expand the universal push-button sensor

module to include four additional buttons

3 Operation

Operating a function or load

Depending on the programming, a button can have up to three functions assigned to it –

upper/left, lower/right, entire surface. Operation depends on the specific function.

o Switch: Short press on button.

o Dim: Long press on button. The dimming process ends when the button is released.

o Move Venetian blind: Long press on button.

1/5

32566733

j0082566733 23.03.2016

Produkt Specifikationer

Mærke:	JUNG
Kategori:	Smart hjem
Model:	4192 TSM
Produktfarve:	Black,Grey
Kontroltype:	Knapper
Indbygget skærm:	Ingen
Produkttype:	Skifteaktuator
Wi-Fi:	Ingen
Opbevaringstemperatur (T-T):	-25 - 70 °C
Ethernet LAN:	Ingen
Driftstemperatur (T-T):	-5 - 45 °C
Forbindelsesteknologi:	Ledningsført
LED-indikatorer:	Ja
Strømkilde type:	DC
Indgangsspænding:	21 - 32 V
Temperaturføler:	Ja
Trykknap:	Ja
Temperatursensorens driftstemperatur:	-5 - 45 °C