Ozito LMPC-301U Manual

Ozito Plæneklipper LMPC-301U

Læs nedenfor 📖 manual på dansk for Ozito LMPC-301U (3 sider) i kategorien Plæneklipper. Denne guide var nyttig for 7 personer og blev bedømt med 4.5 stjerner i gennemsnit af 2 brugere

Side 1/3
Safety information for lawn mowers
Check the machine for signs of damage before use. Repairs may only be carries out
by our service workshop.
Worn parts may only be replaced by our service workshop. If necessary contact the
service address provided.
How to use lawn mowers safely
Training
a) Read the directions with due care. Familiarize yourself with the operator controls and
proper operation of the machine.
b) Never allow children or other persons who are not familiar with the operating
instructions to use the mower. Contact your local governmental agency for information
egarding minimum age requirements for the user.
c) Never mow in the direct vicinity of persons -especially children - or animals.
d) Always keep in mind that the operator or user of the equipment is responsible for
accidents involving other persons and/or their property.
Preliminary measures
a) Always wear sturdy, non-slip footwear and long trousers when using the machine.
Never use the machine barefoot or in sandals. Avoid wearing loosely tting clothes or
clothing with hanging belts or cords.
b) Check the ground on which the equipment will be used and remove all objects that
could be caught up or violently ung out.
c) Before using the scythe, visually inspect it to ensure that the blade, mounting
bolts and the entire cutting apparatus are in good working order (i.e. not worn out
or damaged). To prevent any imbalance, replace worn out or damaged blades and
mounting bolts as a set only (if applicable).
Handling
• Only mow in broad daylight or in well-lit conditions.
• Do not use the machine on wet grass.
Always maintain good footing on inclines.
• Only operate the machine at a walking pace.
Always mow across hills i.e. never straight up or straight down.
• Be particularly careful when you change direction on a slope.
• Do not mow on overly steep inclines.
Always be extra careful when turning the mower around and when pulling it towards
you.
• Never use the lawn mower if the guards are damaged or without the attached guards,
e.g. deectors and/or grass catching devices.
• Never move your hands or feet toward or under any rotating parts. Keep clear of the
chute opening at all times.
Maintenance and storage
• Make sure that all nuts, bolts and screws are tightened securely and that the machine
is in safe working condition.
• For your own safety, have worn or damaged parts replaced without delay.
• Take care not to jam your ngers between moving blades and stationary parts of the
equipment while you are adjusting the equipment.
PUSH REEL
MOWER
300mm
ORIGINAL INSTRUCTIONS
LMPC-301U
WHAT’S IN THE BOX
SPARE PARTS
ozito-diy.co.uk
1. Never allow children or people unfamiliar with these instructions to use the
mower.
2. Only use the mower in the manner and for the functions described here in.
3. Never operate the mower when you are tired, ill or under the inuence of drugs,
alcohol or medicine.
4. The operator or user is responsible for accidents or hazards occurring to other
people or their property.
5. Use the mower only in daylight or good articial light.
6. Avoid operating your mower in wet grass, where feasible.
7. Take care in wet grass, you may loose your footing.
8. On slopes be extra careful of your footing and wear non-slip footwear.
9. Mow across the face of slopes, never up and down.
10. Exercise extreme caution when changing direction on slopes. Walk, never run.
11. Mowing on banks and slopes can be dangerous. Do not mow on banks or steep
slopes.
12. Do not walk backwards when mowing, you could trip.
13. Never cut grass by pulling the mower towards you.
14. Never operate the mower with damaged guards or without guards in place.
15. Keep hands and feet away from the blade at all times and especially when the
mower is in use.
16. Do not put hands near the blades during operation.
SAFETY INSTRUCTIONS
1217
MAINTENANCE
General Maintenance
Keep all nuts, bolts and screws tight to be sure the mower is in a safe
working condition.
Replace worn or damaged parts for safety.
Be careful during adjustments of the hand lawn mower to prevent
entrapment of the ngers between moving blade and xed parts
of the machine.
2 x Handle Uprights
Sharpening the blades
Before taking the time and effort to sharpen the blades, make sure that
it needs sharpening. Most of all issues can be solved by ensuring the
blades are properly adjusted ( section).ADJUSTMENTS
1. Prop up the push reel mower so that the blade reel can be rotated
by turning the wheels.
2. Check the blades for nicks and burrs. If any damage is found, it
usually can be removed by holding a le at against the blade and
pushing away from the edge.
3. Examine the cutting bar. It should just meet the blades along their
entire length. (To make sure the cutting bar is located correctly,
grasp a wheel and turn it forward; you should hear a whispery
sound as the blades pass the cutting bar).
4. If the bar is out of alignment, adjust using the adjustment nuts on
the ends of the bar ( section).ADJUSTMENTS
5. Using oft paintbrush, cover the blades with a thin, even coat of
automotive valve-grinding compound (available at automotive
stores).
6. Grasp a wheel and turn it slowly backward so the grinding
compound is squeezed between the blades and the cutting bar,
thereby sharpening both cutting edges as they pass each other. Be
sure that each blade touches the bar as the wheel is rotated.
7. Make about a dozen turns, applying more grinding compound when
necessary.
8. Examine the blade edges. If they look sharp, wash off all the valve
compound with soapy water and rinse thoroughly.
9. Test for sharpness. Insert a sheet of newspaper between the
blades and the cutting bar, and rotate the reel forward. When the
blades cut the paper as easily and as cleanly as a sharp pair of
scissors would, the task is complete.
NOTE: After each use, hose the mower clean and wipe it dry. Wipe all
the metal parts with a thin lm of WD-40 or mineral oil.
WARNING: SHARPEN BLADES ONLY BY HAND.
THE HEAT GENERATED BY A POWER GRINDER
OR AN ELECTRIC DRILL WITH A GRINDING WHEEL
ATTACHED CAN DESTROY THE TEMPER OF THE
METAL. WEAR THICK LEATHER GLOVES WHEN
HANDLING THE BLADE REEL AND CUTTER BAR
AND MAKE SLOW, PRECISE MOVEMENTS TO AVOID
CUTTING OR JAMMING YOUR FINGERS.
7 x Handle Screws & Nuts
(Includes 1 Spare Set)
Mower
Lower Handle
Upper Handle
PUSH LAWN MOWER SAFETY
OZITO UK Unit 9 Stadium Court, Wirral International Business Park, Plantation Road, Bromborough, Wirral, CH62 3QG
All of our products undergo strict quality checks to ensure that they reach
you in perfect condition. In the unlikely event that your device develops a
fault, please contact our service department at the address shown on this
guarantee card. You can also contact us by telephone using the customer
service number shown. Please note the following terms under which
guarantee claims can be made:
1. These warranty terms regulate additional warranty services, which the
manufacturer mentioned below promises to buyers of its new products
in addition to their statutory guarantee claims are not affected by this
guarantee. Our guarantee is free of charge to you.
2. The warranty services only covers defects due to material or
manufacturing faults on a product which you have bought from the
manufacturer mentioned below are limited to either the rectication of said
defects on the product or the replacement of the product, whichever we
prefer.
Please note that our devices are not designed for use in commercial, trade
or professional applications. A guarantee contract will not be created if the
device has been used by commercial, trade or industrial business or has
been exposed to similar stresses during the guarantee period.
3. The following are not covered by our guarantee:
- Damage to the device caused by a failure to follow the assembly
instructions or due to incorrect installation, a failure to follow the operating
instructions (for example connecting it to an incorrect mains voltage or
current type) or a failure to follow the maintenance and safety instructions
or by exposing the device to abnormal environmental conditions or by lack
of care and maintenance.
- Damage to the device caused by abuse or incorrect use (for example
overloading the device or the use or unapproved tools or accessories),
ingress of foreign bodies into the device (such as sand, stones or dust,
transport damage), the use of force or damage caused by external forces
(for example by dropping it).
- Damage to the device or parts of the device caused by normal or natural
wear or tear or by normal use of the device.
4. Your Product is guaranteed for a period of 36 months from the original
date of purchase and is intended for DIY (Do It Yourself) use only. Warranty
excludes consumable parts. Guarantee claims should be submitted
before the end of the guarantee period within two weeks of the defect
being noticed. No guarantee claims will be accepted after the end of the
guarantee period. The original guarantee period remains applicable to the
device even if repairs are carried out or parts are replaced. In such cases,
the work performed or parts tted will not result in an extension of the
guarantee period, and no new guarantee will become active for the work
performed or parts tted. This also applies if an on-site service is used.
IN ORDER TO MAKE A CLAIM UNDER THIS WARRANTY YOU MUST
RETURN THE PRODUCT TO THE PLACE OF PURCHASE WITH YOUR
REGISTER RECEIPT.
Please refer to the restrictions of this warranty concerning wearing parts,
consumables and missing parts as set out in the service information in
these operating instructions.
CUSTOMER SERVICE HELPLINE
GB: 0151 294 4488
IRL: 1850 882711
Ozito-diy.co.uk
WARRANTY
SERVICE INFORMATION
Spare parts can be ordered from the Special Orders Desk at your local
Bunnings Warehouse or Homebase store.
For further information, or any parts visit
www.ozito-diy.co.uk or contact Ozito Customer Service:
Great Britain: 0151 294 4488
Ireland: 1850 882711
E-mail: info@ozito-diy.co.uk
Please note that the following parts of this product are subject to normal
or natural wear and that the following parts are therefore also required
for use as consumables.
* Not necessarily included in the scope of delivery!
Category Example
Wear parts* Mowing spindle
Consumables*
Missing parts
DESCRIPTION OF SYMBOLS
Warning - Read the operating
instructions to reduce
the risk of injury
Important! Keep other persons
and animals away from
the danger zone!
Caution! - Sharp blades
Take care when the blades are rotating.
Do not put your hands or feet into openings
when the machine is running.
TROUBLESHOOTING
Problem Cause Remedy
Unusual
noises
- Loose screws/parts
- Foreign bodies stuck
in blades
- Damaged blade
Wrongly adjusted
blade
- Tighten the screws
- Remove the foreign
bodies
- Have the blade replaced
- Set the counter blade
Unsatisfactory
cutting results
- Wrongly adjusted
blade
- Blunt blade
- Set the counter blade
- Have the blade
sharpened or replaced
Grass Catcher
SPECIFICATIONS
Cutting Width: 300mm
Cutting Height: 14-47mm
Cutting Blade: Ø125mm
Grass Catcher: 18 Litre
Weight: 6.5kg


Produkt Specifikationer

Mærke: Ozito
Kategori: Plæneklipper
Model: LMPC-301U

Har du brug for hjælp?

Hvis du har brug for hjælp til Ozito LMPC-301U stil et spørgsmål nedenfor, og andre brugere vil svare dig




Plæneklipper Ozito Manualer

Ozito

Ozito PXBMK-4047SP Manual

31 August 2024
Ozito

Ozito ELM-1230 Manual

16 August 2024
Ozito

Ozito ESA-1231U Manual

15 August 2024
Ozito

Ozito PXCLMK-218U Manual

13 August 2024
Ozito

Ozito PXCLMK-418U Manual

12 August 2024
Ozito

Ozito LMPC-301U Manual

12 August 2024
Ozito

Ozito ELM-1250U Manual

11 August 2024
Ozito

Ozito ELM-1230U Manual

7 August 2024
Ozito

Ozito PXCLMK-218E Manual

5 August 2024

Plæneklipper Manualer

Nyeste Plæneklipper Manualer

Einhell

Einhell BG-EV 1231 Manual

24 November 2024
Einhell

Einhell BMH 33/36 Manual

24 November 2024
Toro

Toro 21863 Manual

19 November 2024
Husqvarna

Husqvarna V554X Manual

18 November 2024
Gardena

Gardena 400 C Manual

16 November 2024
DeWalt

DeWalt DCMWSP650 Manual

9 November 2024
DeWalt

DeWalt DCMWSP256 Manual

9 November 2024