Salus RX10RF Manual

Salus Smart hjem RX10RF

Læs nedenfor 📖 manual på dansk for Salus RX10RF (2 sider) i kategorien Smart hjem. Denne guide var nyttig for 21 personer og blev bedømt med 4.5 stjerner i gennemsnit af 2 brugere

Download PDF
Side 1/2
I N S T AL L E R / U S E R M A N U A L
Wireless Receiver Unit
Models: RX10RF
www.salus-controls.com
SALUS Controls plc
SALUS House
Dodworth Business Park South,
Whinby Road,
Dodworth, Barnsley S75 3SP, UK.
SALES: T: +44 (0) 1226 323961
E: sales@salus-tech.com
TECHNICAL: T: +44 (0) 1226 323961
E: tech@salus-tech.com
For PDF Installation guide please go to
www.salus-controls.com
Maintaining a policy of continuous product development SALUS
Controls plc reserve the right to change specication, design and
materials of products listed in this brochure without prior notice.
SALUS Controls is a member of the Computime Group
00086/2 Issue Date: Dec 2016
SALUS Controls warrants that this product will be free from any defect in materials or
workmanship, and shall perform in accordance with its specication, for a period of ve
years from the date of installation. SALUS Controls sole liability for breach of this warranty
will be (at its option) to repair or replace the defective product.
Customer Name: ..........................................................................................................
Customer Address: .......................................................................................................
................................................................ Post Code: ...................................................
Tel No: .................................................... Email: ..........................................................
Engineers Company: ....................................................................................................
Tel No: .................................................... Email: ..........................................................
Instalation Date: ..........................................................................................................
Engineers Name: .........................................................................................................
Engineers Signature: ...................................................................................................
WARRANTYTECHNICAL DETAIL
INSTALLATION
Model RX10RF
Type Wired system receiver designed for 230VAC
heating applications
Control ON-OFF control
Environment Ratings
Operating Temperature 0 ºC to +50 ºC
Storage Temperature -20 ºC to +60 ºC
Operating Humidity 5-95 %RH
Switch Voltage 0-230VAC 16AMP
Power Source 230Vac 50Hz
User Interface Slide switch, Bi Colour LED, RED/GREEN
Operating Temperature 0 to 50 ºC
Storage Temperature -20ºC to 60ºC
Frequency 2.4 GHz
Approval CE
Terminal Function
COM Common Contact (volt free input)
NO Normally Open Contact (volt free output)
Earth Parking
L Incoming Mains - Live
N Incoming Mains - Neutral
Clip the front of the unit back on
by aligning the ttings and
pushing into place.
Securely screw the front of
the receiver in place.
Wire up the receiver using
one of the schematics*.
4
5
1
2
3
4
5
6
Loosen the screws at the bottom
of the receiver unit.
Unclip the front of the unit.
Fit the back of the receiver unit to the
wall using the ttings supplied.
1 2
3
Ensure Coordinator
is powered up and
ready for pairing.
Reset Button
If for any reason the system receiver stops operating, press
reset and check system operation.
*Congured
as RX2
*Congured
as RX1
Replacing the System Receiver
If for any reason the system receiver needs to be removed/
replaced, press the delete from network.
Electrical Connection Schematics Power Up
The RX10RF Receiver should be mounted in a suitable location that is both accessible
for the connection of mains and control wiring, and allows good reception of the RF
signal. The Receiver needs a 230V AC mains supply to operate, and this should be
fused appropriately (16A max.).
The Receiver should be mounted in a location where it will not come into contact
with water, moisture or condensation. There are few electrical connections required
to the RX10RF, and these connections should be made to the terminal block inside
the Receiver. No Earth connection is required for the correct and safe operation of the
RX10RF, but a parking terminal is provided to connect an Earth wire if one is present.
5sec
5sec
5sec
OR OR
*For use without internet.
Power up the receiver.
The red light will ash.
When the receiver has successfully joined the
Zigbee network, the red LED will go steady.
Please refer to VS10/VS20RF manual for system
pairing.
5sec 5sec
OR OR
Once your system
setup is complete,
remember to take
the coordinator out
of pairing mode.

Produkt Specifikationer

Mærke: Salus
Kategori: Smart hjem
Model: RX10RF

Har du brug for hjælp?

Hvis du har brug for hjælp til Salus RX10RF stil et spørgsmål nedenfor, og andre brugere vil svare dig


Smart hjem Salus Manualer

Salus

Salus CSB600 Manual

19 September 2024
Salus

Salus G30 Manual

10 August 2024
Salus

Salus UG600 Manual

6 August 2024
Salus

Salus SR868 Manual

3 August 2024
Salus

Salus WLS600 Manual

31 Juli 2024
Salus

Salus RX10RF Smart Home Manual

20 Juli 2024
Salus

Salus RX10RF Manual

15 April 2024
Salus

Salus TRV10RFM Manual

6 April 2024
Salus

Salus HTR-RF20 Manual

31 Marts 2024
Salus

Salus RE600 Manual

22 September 2023

Smart hjem Manualer

Nyeste Smart hjem Manualer

Elro

Elro FZ5002611R Manual

4 November 2024
Qnect

Qnect QN-WP01 - 414000005 Manual

15 Oktober 2024
Qnect

Qnect QN-WP04 - 414000001 Manual

15 Oktober 2024
Elro

Elro AB600S-2 Manual

13 Oktober 2024
Tenda

Tenda SP15 Manual

9 Oktober 2024
Eufy

Eufy Lumi Plug-in Night Light Manual

6 Oktober 2024
Ikea

Ikea INSPELNING 205.698.40 Manual

5 Oktober 2024
ETiger

ETiger ES-D4A Manual

3 Oktober 2024
Alecto

Alecto EUP-90W Manual

2 Oktober 2024
EZVIZ

EZVIZ L2 Manual

2 Oktober 2024