Silvergear 1832 - Motion Sensor Manual

Silvergear Smart home 1832 - Motion Sensor

Læs nedenfor 📖 manual på dansk for Silvergear 1832 - Motion Sensor (1 sider) i kategorien Smart home. Denne guide var nyttig for 5 personer og blev bedømt med 4.5 stjerner i gennemsnit af 2 brugere

Download PDF
Side 1/1
How to reset?
(1) Press the reset button for 6 seconds till the indicator
ash rapidly.Then device turns to smart wi mode.
(2) Press the reset button again for 6 seconds till the
indicator ash slowly. The device turns to AP mode.
MOTION SENSOR
INSTRUCTION
You can experience the various advanced features of
the product with the app, just try and do it yourself.
Main fuction
Operate status:alarm/normal (the device can be
triggered only once in 1 minute)
Alarm recording(click”HISTORY”).
Turn O/On push notication(click”NOTICE”).
Linkage alarm setting
To connect two Sensors via scene setting.
Device sharing
Allow others to control the device
Push notication
Open/close push notication
Remove device
Restore default settings; Delete and add the device
again to clear the record by APP.
Make Your Home Smarter
Smart life
Code button
Battery
LED Light
Holder
Holder
Sticker Screw
Screw stopper
Inductive area
Battery: CR123A-3V X 1
Standby current: 34uA
Alarm current: 75mA-90mA
Standby time: 5 years
Battery Life: 2500 times trigger(1 year if trigger 7
times per day, 2 years if trigger 3 times per day)
Wireless type: 2.4GHz
Wireless standard: IEEE 802.11b/g/n
Wireless range: 45M
Sensitive distance: 6M
Operating Temperature: 0℃～ 40℃ (32°F～104°F)
Operating Humidity: 20% ～ 85%
Storage Temperature: 0℃ ～ 60℃ (32°F ～140°F)
Storage Humidity: 0% ～ 90%
Size: 50mm x 48mm x 48mm
Device Status
Smart Wi-Fi
AP mode
Triggered
Suspend mode
Reset
LED State
Indicator ashes quickly
Indicator ashes slowly
LED will rapidly blink,and OFF
after scheduled time
Indicator o
Indicator lights up for 4s and after
2 seconds lights o, device goes
into conguration mode
Thanks for
Choosing our WiFi Smart Home Sensors
What’s the App User Interface Like ?SpecicationsProduct Conguration Experience Advanced FeaturesLED State Get Started with Tuya Smart App
1. Download APP
Download the "Smart life" app
from APP Store or Google Play
to your mobile.
2. Register and Login
Launch the "Smart life" app.
To register,enter your mobile phone number or email
address,create a password ,then login to the app.
Login if you have an account already.
3. Add Device
Power on the smart sensor which default's mode is
Smart WiFi mode.
Select the “+” symbol on the top right-hand corner.
Select your product type and follow the instructions of
the app.
If the connecting fails,try using AP Mode
On the “Add device” page select “AP Mode” on the top
right-hand corner and follow the instructions of the app.
Finally,have fun!

Produkt Specifikationer

Mærke: Silvergear
Kategori: Smart home
Model: 1832 - Motion Sensor

Har du brug for hjælp?

Hvis du har brug for hjælp til Silvergear 1832 - Motion Sensor stil et spørgsmål nedenfor, og andre brugere vil svare dig


Smart home Silvergear Manualer

Silvergear

Silvergear 1832 - Motion Sensor Manual

11 August 2024

Smart home Manualer

Nyeste Smart home Manualer

LSC Smart Connect - Action

LSC Smart Connect - Action App Smart Home Manual

5 September 2024
LSC Smart Connect - Action

LSC Smart Connect - Action 970753 - Outdoor LED Strip Smart Home Manual

5 September 2024
LSC Smart Connect - Action

LSC Smart Connect - Action Smart LED 970726 Smart Home Manual

5 September 2024
LSC Smart Connect - Action

LSC Smart Connect - Action Smart LED 970744 Smart Home Manual

5 September 2024
LSC Smart Connect - Action

LSC Smart Connect - Action Smart Wall Plug 970760 Smart Home Manual

5 September 2024
LSC Smart Connect - Action

LSC Smart Connect - Action Smart LED 970714 Smart Home Manual

5 September 2024
Ikea

Ikea RODRET 005.597.95 Manual

5 September 2024
Tjilla

Tjilla Slimme stekker HK4533 Manual

26 August 2024
Iungo

Iungo Toegang op afstand Manual

26 August 2024
Iungo

Iungo CO2 Sensor MCOHome Manual

26 August 2024