Sony SA-SW5 Manual

Sony Soundbar SA-SW5

Læs nedenfor 📖 manual på dansk for Sony SA-SW5 (1 sider) i kategorien Soundbar. Denne guide var nyttig for 24 personer og blev bedømt med 4.5 stjerner i gennemsnit af 2 brugere

Download PDF

Side 1/1

Subwoofer

Operating Instructions

SA-SW5

5-027-345- (1)62

About compatible

models for the

subwoofer

The SA-SW5 subwoofer works only with the specified

model. For information about compatible models,

visit Sony's website.

In these Operating Instructions, the operations are

described for the subwoofer used with the

compatible model HT-A7000 or HT-A9.

Parts and Controls

Front





Power indicator

– Flashes slowly (green): The subwoofer is

attempting to automatically connect to a

compatible model.

– Lights up (green): The subwoofer is connected to

a compatible model.

– Flashes twice repeatedly (green): The subwoofer

is attempting to manually connect to a

compatible model.

– Flashes/lights up (amber): The software is

updating.

– Lights up (red): The subwoofer is in standby

mode.

– Turns off: The subwoofer is turned off.

Slit

Note

The brightness of the power indicator syncs with the

DIMMER settings of a compatible model.

Rear







 (power) button

LINK button

AC inlet

Installation

The following illustration is the installation example

to use the subwoofer with the compatible model

HT-A7000 and optional rear speakers.

SA-SW5

1 Install the subwoofer in the place that you

want.

You can install the subwoofer in the place that

you want because the output sound from it has

no directivity.

The above illustration is the example for

installation of the subwoofer.

Note

Install the subwoofer with the slit on the bottom, as

shown in the “Parts and Controls” illustration. The

subwoofer is not designed to be installed in a

different orientation.

Connection

Tip

You can connect the optional rear speaker with a

compatible model in the following way when

installing it too.

1 Turn on a compatible model.

2 Connect the AC power cord (mains lead)

(supplied) to the subwoofer, and then connect

the cord to the AC outlets (mains).

3 Make sure that the power indicator on the

subwoofer lights in green.

When the power indicator lights in green, the

connection between the subwoofer and a

compatible model is established.

For the cases below, follow the steps under

“Performing a Manual Connection” to connect the

subwoofer to a compatible model.

– When you use multiple compatible models and

want to specify the model to which you wish to

connect the subwoofer.

– If you have previously connected other

subwoofers to the compatible model.

– If you cannot connect the subwoofer to a

compatible model automatically for any other

reason.

Performing a Manual Connection

The following operation is described for the

subwoofer used with the compatible model

HT-A7000 or HT-A9. Use the remote control supplied

with the compatible model HT-A7000 or HT-A9 when

performing this operation.

If you use other compatible models, refer to the

Operating Instructions supplied with them.

1 Press HOME.

The home menu appears on the TV screen.

2 Select [Setup] - [Advanced Settings] on the

home menu.

3 Select [Speaker Settings] - [Wireless Speaker

Settings] - [Start manual linking].

The [Start manual linking] screen appears on the

TV screen.

4 Press LINK on the subwoofer.

The power indicator of the subwoofer that had

LINK pressed flashes twice repeatedly in green.

5 Select [Start].

The manual connection starts.

The connecting process appears on the TV screen.

To cancel the manual connection, select [Cancel].

6 When [Subwoofer] display [Connected], select

[Finish].

7 Press (enter).

The manual connection is established and the

power indicator of the subwoofer lights in green.

Note

• If you perform [Start manual linking], [Link mode]

of [Wireless Speaker Settings] is set to [Manual]

automatically.

• Only the speakers for which [Connected] has been

displayed in Step 6 connect to a compatible model.

If the subwoofer is not properly connected,

perform the operation again from Step 1.

If Wireless Transmission is Unstable

If you use multiple wireless systems, such as a

wireless LAN, the wireless signals may become

unstable. In this case, the transmission may be

improved by changing the following setting.

The following operation is described for the

subwoofer used with the compatible model

HT-A7000 or HT-A9. Use the remote control supplied

with the compatible model HT-A7000 or HT-A9 when

performing this operation.

If you use other compatible models, refer to the

Operating Instructions supplied with them.

1 Press HOME.

The home menu appears on the TV screen.

2 Select [Setup] - [Advanced Settings] on the

home menu.

3 Select [Speaker Settings] - [Wireless

Speaker Settings] - [RF Channel].

4 Select the setting you want.

• [On] (default setting): Normally select this. The

system automatically selects the better channel

for transmission. Stronger mode for wireless

interference.

• [Off]: The system selects a channel from the

limited frequency band to prevent external

wireless interference. If sound dropping occurs

while [On] is selected, it may be improved by

selecting [Off].

Note

• If you change the [RF Channel] setting from [Off] to

[On], it may take 1 minute to reconnect.

• A compatible model may not meet this setting

depending on countries/regions where you

purchase it.

Troubleshooting

If you experience any of the following difficulties

while using the subwoofer, use this troubleshooting

guide to help remedy the problem before requesting

repairs. Should any problem persist, consult your

nearest Sony dealer.

Be sure to bring all of your subwoofer, a compatible

model and optional rear speakers (not supplied)

even if it seems as though only one has a problem,

when you request to repair.

The following solutions are described for the

subwoofer used with the compatible model

HT-A7000 or HT-A9.

If you use other compatible models, refer to the

Operating Instructions supplied with them.

No sound or only a very low-level sound is heard

from the subwoofer.

q Press SW (volume) + or BASS + on the remote 

control of a compatible model to increase the

subwoofer volume.

q Make sure that the power indicator on the

subwoofer is lit in green.

q If the power indicator on the subwoofer does not

light, try the following.

– Make sure the AC power cord (mains lead) of the

subwoofer is connected properly.

– (power) of the subwoofer to turn on the Press 

power.

q If the power indicator on the subwoofer flashes

slowly in green or lights in red, try the following.

– Move the subwoofer to a location near a

compatible model so that the power indicator on

the subwoofer lights in green.

– Follow the steps in “Performing a Manual

Connection.”

– Check the wireless connection status. For details,

refer to the Operating Instructions supplied with

a compatible model.

q If the power indicator on the subwoofer flashes in

red, press (power) of the subwoofer to turn off 

the power and check whether the ventilation holes

of the subwoofer is blocked or not.

q If the input sources contain very little bass sound

components (i.e., a TV broadcast), the sound from

the subwoofer may be difficult to hear. You can

check the subwoofer sound by emitting the test

tone.

q Set the night mode to off. For details, refer to the

Operating Instructions supplied with a compatible

model.

q If you change the [RF Channel] setting from [Off]

to [On], it may take 1 minute for the sound to be

output.

Sound skips or has noise.

q If there is a device nearby that generates

electromagnetic waves, such as a wireless LAN or

a microwave oven in use, locate the subwoofer

and a compatible model apart from it.

q If there is an obstacle between the subwoofer and

a compatible model, move or remove it.

q Locate the subwoofer and a compatible model as

close as possible.

q Change the [RF Channel] setting to [Off], and then

change to [On] again.

q Switch the network connection of the TV or Blu-ray

Disc player from wireless to wired.

q Change the [Wireless Playback Quality] setting to

[Connection].

Specifications

POWER OUTPUT (reference)

300 W (at 2 ohms, 100 Hz)

Speaker system

Subwoofer speaker system, Passive radiator type

Speaker

180 mm cone type

200 mm × 300 mm cone type, Passive radiator

Power requirements

220 V - 240 V AC, 50 Hz/60 Hz

Power consumption

On: 43 W

Standby mode: 1 W or less

Turned off: 0.5 W or less

Dimensions (approx.) (w/h/d)

277 mm × 409 mm × 422 mm

(not including projection portion)

Mass (approx.)

13.0 kg

Wireless transmitter/receiver section

Communication system

Wireless Sound Specification Version 4.0

Frequency band

5 GHz

Modulation method

OFDM

Radio Frequency Bands and Maximum Output

Power

Frequency band Maximum output power

5150 - 5250 MHz < 18 dBm

5250 - 5350 MHz < 18 dBm

5470 - 5600 MHz < 18 dBm

5650 - 5725 MHz < 18 dBm

5725 - 5850 MHz < 13.98 dBm

Included items

• Subwoofer (1)

• AC power cord (mains lead) (1)

• Operating Instructions (1)

Important information

on software

This product contains software that is subject to the

GNU General Public License (“GPL”) or GNU Lesser

General Public License (“LGPL”). These establish that

customers have the right to acquire, modify, and

redistribute the source code of said software in

accordance with the terms of the GPL or the LGPL.

For the method to confirm the GPL, LGPL and other

software licenses contained in the subwoofer, please

refer to the Operating Instructions of a compatible

model.

When you use the compatible model HT-A7000 or

HT-A9, please refer to [Software License Information]

under [Setup] - [Advanced Settings] - [System

Settings] on the home menu.

You may find a copy of the relevant source code as

required under the GPLv2 (and other licenses) at

https://oss.sony.net/Products/Linux

You may obtain the source code as required by the

GPLv2 on a physical medium from us for a period of

three years after our last shipment of this product by

applying through the form at

https://oss.sony.net/Products/Linux

This offer is valid to anyone in receipt of this

information.

Please note that Sony cannot answer or respond to

any inquiries regarding the content of this source

code.

All other trademarks are trademarks of their

respective owners.

WARNING

Do not install the subwoofer in a confined space,

such as a bookcase or built-in cabinet.

To reduce the risk of fire, do not cover the ventilation

opening of the subwoofer with newspapers,

tablecloths, curtains, etc.

Do not expose the subwoofer to naked flame sources

(for example, lighted candles).

To reduce the risk of fire or electric shock, do not

expose this subwoofer to dripping or splashing, and

do not place objects filled with liquids, such as vases,

on the subwoofer.

The subwoofer is not disconnected from the mains

as long as it is connected to the AC outlet, even if the

subwoofer itself has been turned off.

As the mains plug is used to disconnect the

subwoofer from the mains, connect the subwoofer to

an easily accessible AC outlet. Should you notice an

abnormality in the subwoofer, disconnect the mains

plug from the AC outlet immediately.

Do not place this product close to medical

devices

This product (including accessories) has magnet(s)

which may interfere with pacemakers, programmable

shunt valves for hydrocephalus treatment, or other

medical devices. Do not place this product close to

persons who use such medical devices. Consult your

doctor before using this product if you use any such

medical device.

Indoor use only.

For the customers in Europe

Notice for customers: the following

information is only applicable to

equipment sold in countries applying EU

directives and/or UK applying relevant

statutory requirements

This product has been manufactured by or on behalf

of Sony Corporation.

EU and UK Importer: Sony Europe B.V.

Inquiries to the EU Importer or related to product

compliance in Europe should be sent to the

manufacturer’s authorized representative, Sony

Belgium, bijkantoor van Sony Europe B.V., Da

Vincilaan 7-D1, 1930 Zaventem, Belgium.

Inquiries to the UK Importer or related to product

compliance in the UK should be sent to the

manufacturer’s authorized representative, Sony

Europe B.V., The Heights, Brooklands, Weybridge,

Surrey KT13 0XW, United Kingdom.

Hereby, Sony Corporation declares that this

equipment is in compliance with Directive 2014/53/

EU.

The full text of the EU declaration of conformity is

available at the following internet address:

https://compliance.sony.eu

Hereby, Sony Corporation declares that this

equipment is in compliance with the UK relevant

statutory requirements.

The full text of the declaration of conformity is

available at the following internet address:

https://compliance.sony.co.uk

For this radio equipment, the following restrictions

on putting into service or of requirements for

authorisation of use apply in BE, BG, CZ, DK, DE, EE,

IE, EL, ES, FR, HR, IT, CY, LV, LT, LU, HU, MT, NL, AT, PL,

PT, RO, SI, SK, FI, SE, UK, UK(NI), IS, LI, NO, CH, AL, BA,

MK, MD, RS, ME, XK, TR:

5150 - 5350 MHz band is restricted to indoor

operations only.

This radio equipment is intended to be used with the

approved version(s) of software that are indicated in

the Declaration of Conformity. The software loaded

on this radio equipment is verified to comply with

the essential requirements of the Radio Equipment

Regulations.

The software version can be found in [Setup] -

[Advanced Settings] - [Speaker Settings] - [Wireless

Speaker Settings] - [Software Version] on the home

menu of a compatible model.

Disposal of old electrical &

electronic equipment

(applicable in the European

Union and other countries

with separate collection

systems)

This symbol on the product or on its packaging

indicates that this product shall not be treated as

household waste. Instead it shall be handed over to

the appropriate collection point for the recycling of

electrical and electronic equipment. By ensuring that

this product is disposed of correctly, you will help to

prevent potential negative consequences for the

environment and human health, which could be

caused by inappropriate waste handling of this

product. The recycling of materials will help to

conserve natural resources. For more detailed

information about recycling of this product, please

contact your local Civic Office, your household waste

disposal service or the shop where you purchased

the product.

This equipment should be installed and operated

keeping the radiator over 20 cm away from person’s

body.

For the customers in Australia or New

Zealand

It should be installed and operated with at least

20cm and more between the radiator and person’s

body (excluding extremities: hands, wrists, feet and

ankles).

For the customers in Australia and India

Disposal of old electrical &

electronic equipment

(applicable in the European

Union and other countries

with separate collection

systems)

Precautions

On safety

• Should any solid object or liquid fall into the subwoofer,

unplug the system and have it checked by qualified

personnel before operating it any further.

• Do not climb on the subwoofer, as you may fall down and

injure yourself, or the subwoofer damage may result.

On power sources

• Before operating the subwoofer, check that the operating

voltage is identical to your local power supply. The

operating voltage is indicated on the nameplate at the rear

of the subwoofer.

• If you are not going to use the subwoofer for a long time,

be sure to disconnect the subwoofer from the wall outlet

(mains). To disconnect the AC power cord (mains lead),

grasp the plug itself; never pull the cord.

• One blade of the plug is wider than the other for the

purpose of safety and will fit into the wall outlet (mains)

only one way. If you are unable to insert the plug fully into

the outlet, contact your dealer.

• AC power cord (mains lead) must be changed only at a

qualified service shop.

On heat buildup

• Although the subwoofer heats up during operation, this is

not a malfunction. If you continuously use this subwoofer

at high volume, the subwoofer temperature at the rear and

bottom rises considerably. To avoid burning yourself, do

not touch the subwoofer.

On placement

• Do not place the subwoofer near heat sources or in a place

subject to direct sunlight, excessive dust, or mechanical

shock.

• Do not place metal objects other than a TV around the

subwoofer. Wireless functions may be unstable.

• If the subwoofer is being used in combination with a TV,

VCR, or tape deck, noise may result and picture quality may

suffer. In such a case, place the subwoofer away from the

TV, VCR, or tape deck.

• Use caution when placing the subwoofer on a surface that

has been specially treated (with wax, oil, polish, etc.), as

staining or discoloration of the surface may result.

• The speakers of this subwoofer are not of magnetically

shielded type. Do not place magnetic cards on the

subwoofer or near it.

If you encounter color irregularity on a

nearby TV screen

Color irregularities may be observed on certain types of TV

sets.

On cleaning

Clean the subwoofer with a soft, dry cloth. Do not use any

type of abrasive pad, scouring powder, or solvent such as

alcohol or benzine.

If you have any question or problem concerning your system,

please consult your nearest Sony dealer.

Produkt Specifikationer

Mærke:	Sony
Kategori:	Soundbar
Model:	SA-SW5
Vekselstrømsindgangsspænding:	220 - 240 V
Vekselstrømsindgangsfrekvens:	50 - 60 Hz
Brugervejledning:	Ja
Produktfarve:	Sort
Pakkevægt:	14000 g
Pakkedybde:	376 mm
Pakkebredde:	483 mm
Pakkehøjde:	503 mm
Strømforbrug (standby):	0.5 W
Kabler inkluderet:	Vekselstrøm
Pakketype:	Kasse
Impedens:	2 ohm (Ω)
LED-indikatorer:	Ja
Strømkilde type:	Vekselstrøm
Strømforbrug ( gennemsnitlig drift ):	43 W
Subwoofer RMS-effekt:	300 W
Subwoofer driver diameter:	180 mm
Subwoofer type:	Passiv subwoofer
Subwoofer frekvensomrpde:	- Hz
Subwoofer dybde:	422 mm
Subwoofer bredde:	277 mm
Trådløs subwoofer:	Ja
Subwoofer vægt:	13000 g
Subwoofer højde:	409 mm
Sudwoofer kegle, materiale:	Papir