StarTech.com CFASTRWU3 Manual


Læs nedenfor 📖 manual på dansk for StarTech.com CFASTRWU3 (2 sider) i kategorien Hukommelseskortlæser. Denne guide var nyttig for 10 personer og blev bedømt med 4.5 stjerner i gennemsnit af 2 brugere

Side 1/2
Quick-start guide
FR: Guide de l’utilisateur - fr.startech.com
DE: Bedienungsanleitung - de.startech.com
ES: Guía del usuario - es.startech.com
NL: Gebruiksaanwijzing - nl.startech.com
PT: Guia do usuário - pt.startech.com
IT: Guida per l’uso - it.startech.com
Manual Revision: 01/20/2017
For the latest information, technical specications, and support for
this product, please visit www.StarTech.com/CFASTRWU3.
Package contents
1 x USB 3.0 card reader/writer
1 x quick-start guide
CFASTRWU3
USB 3.0 Card Reader / Writer for CFast 2.0 Cards
*actual product may vary from photos
Introduction
The CFASTRWU3 USB 3.0 Card Reader/Writer enables you to quickly
access and back up photos and videos from your CFast™ memory
cards to your tablet, laptop, or desktop computer.
Product diagram
About USB 3.0 and USB 3.1 Gen 1
USB 3.0 is also known as USB 3.1 Gen 1. This connectivity standard
oers speeds up to 5Gbps. Any mention of USB 3.0 in this manual
or on the StarTech.com website for CFASTRWU3 refers to the 5Gbps
USB 3.1 Gen 1 standard.
Note: Data transfer rates are dependent upon the speed of the
memory card that you are using and the speed capabilities of the
USB port on your host device.
Connect the card reader/writer
1. Connect the on the card reader/writer to a USB port USB 3.0 plug
on your tablet, laptop, or desktop computer.
2. Insert a CFast memory card into the CFast port on the card
reader/writer.
3. To access content on the CFast memory card, follow the
instructions specic to the OS that you’re running.
When you connect the card reader/writer to your tablet, laptop, or
desktop computer, your system automatically detects and installs
the required software.
Note: The CFASTRWU3 doesn’t require an external power supply, as
it receives enough power through the USB bus that it’s connected to.
USB 3.0 plug
CFast port Activity LED
Requirements
A tablet, laptop, or desktop computer with a USB Type-A port
A CFast memory card
Note: To obtain the maximum USB throughput, you must use a
system with a USB 3.0 port.
The CFASTRWU3 is OS independent and doesn’t require any
additional drivers or software.
Requirements are subject to change. For the latest requirements,
please visit www.StarTech.com/CFASTRWU3.
Disconnect the card reader/writer
Windows
1. On your desktop, click the Safely Remove Hardware icon.
2. In the list that appears, click the card reader/writer.
3. When a message appears saying that its safe to do so, remove the
card reader/writer from your laptop, or computer.
Caution! If you remove the card reader/writer before its safe to do
so, you could experience lost or corrupted data on your memory
card.
macOS
1. Close any open windows that list the contents of the card
reader/writer.
2. On your desktop, click and drag the USB storage trash icon to the
can icon.
3. Wait ten seconds and then remove the card reader/writer.
Caution! If you remove the card reader/writer before it is safe to do
so, you could experience lost or corrupted data on your memory
card.


Produkt Specifikationer

Mærke: StarTech.com
Kategori: Hukommelseskortlæser
Model: CFASTRWU3

Har du brug for hjælp?

Hvis du har brug for hjælp til StarTech.com CFASTRWU3 stil et spørgsmål nedenfor, og andre brugere vil svare dig




Hukommelseskortlæser StarTech.com Manualer

Hukommelseskortlæser Manualer

Nyeste Hukommelseskortlæser Manualer

Hama

Hama 123948 Manual

18 September 2024
Icy Dock

Icy Dock MB123SRCK-1B Manual

6 September 2024
Vantec

Vantec UGT-CR615 Manual

5 September 2024
CSL

CSL 300921 Manual

3 September 2024
CSL

CSL 300368 Manual

3 September 2024
CSL

CSL 300663 Manual

3 September 2024
CSL

CSL 300020 Manual

3 September 2024
CSL

CSL 304414 Manual

3 September 2024