StarTech.com SDMSDRWU3AC Manual


Læs nedenfor 📖 manual på dansk for StarTech.com SDMSDRWU3AC (2 sider) i kategorien Hukommelseskortlæser. Denne guide var nyttig for 15 personer og blev bedømt med 4.5 stjerner i gennemsnit af 2 brugere

Side 1/2
Quick-start guide
FR: Guide de l’utilisateur - fr.startech.com
DE: Bedienungsanleitung - de.startech.com
ES: Guía del usuario - es.startech.com
NL: Gebruiksaanwijzing - nl.startech.com
PT: Guia do usuário - pt.startech.com
IT: Guida per l’uso - it.startech.com
Manual Revision: 02/16/2017
For the latest information, technical specications, and support for
this product, please visit www.StarTech.com/SDMSDRWU3AC.
Package contents
1 x card reader/writer
2 x end caps
1 x quick-start guide
Requirements
microSD or SD card
Computer, tablet, laptop, or smartphone equipped with a USB-C or
USB-A port
Note: To obtain the maximum USB throughput, you must use a
system with a USB 3.0 port.
The SDMSDRWU3AC is OS independent and doesn’t require any
additional drivers or software.
The card reader/writer receives enough power through the USB bus
and doesn’t require an additional power source.
Requirements are subject to change. For the latest requirements,
please visit www.StarTech.com/SDMSDRWU3AC.
SDMSDRWU3AC
USB 3.0 Memory Card Reader/Writer for SD and microSD cards - USB-C and USB-A
*actual product may vary from photos
Introduction
The SDMSDRWU3AC provides a quick and easy way to access
data stored on SD™ cards and microSD™ cards, and supports data
transfer speeds up to 5Gbps. You can use this card reader/writer
with a computer, tablet, laptop, or smartphone that’s enabled with a
USB-C™ or USB-A port.
Product diagram
Removable end cap
USB-C connector
(not pictured)
USB-A connector
(not pictured)
Activity LED
microSD card slot
SD card slot
Removable end cap
About USB 3.0 and USB 3.1 Gen 1
USB 3.0 is also known as USB 3.1 Gen 1. This connectivity standard
oers speeds up to 5Gbps. Any mention of USB 3.0 in this manual or
on the StarTech.com website in relation to SDMSDRWU3AC refers to
the 5Gbps USB 3.1 Gen 1 standard.
Note: Data transfer rates are dependent upon the speed of the
memory card you are using and the speed capabilities of the USB
port on your device.
About the LED indicator
The SDMSDRWU3AC features a blue located to the Activity LED
left of the card slots. The blinks to indicate that data is Activity LED
being transferred.
Avoid disconnecting the card reader/writer when the is Activity LED
blinking.
Connect the card reader/writer
1. Gently slide a memory card into the appropriate card slot on the
SDMSDRWU3AC until you feel resistance and the card is fully
inserted.
2. Do one of the following:
Insert the on the card reader/writer into the USB-C connector
USB-C port on your computer, tablet, laptop, or smartphone.
Insert the on the card reader/writer into the USB-A connector
USB-A port on your computer, tablet, or laptop.
3. To access the content on your memory card, follow the
instructions specic to the operating system that you’re running.
When you connect the card reader/writer, your system automatically
detects and installs the required software.
Caution! Do not insert two cards into the card reader/writer at the
same time. You can only access the data stored on one card at a time.


Produkt Specifikationer

Mærke: StarTech.com
Kategori: Hukommelseskortlæser
Model: SDMSDRWU3AC

Har du brug for hjælp?

Hvis du har brug for hjælp til StarTech.com SDMSDRWU3AC stil et spørgsmål nedenfor, og andre brugere vil svare dig




Hukommelseskortlæser StarTech.com Manualer

Hukommelseskortlæser Manualer

Nyeste Hukommelseskortlæser Manualer

Vimar

Vimar 19457.TR.M Manual

15 December 2024
D-Link

D-Link DUB-2325 Manual

13 December 2024
Hama

Hama 123948 Manual

18 September 2024
Icy Dock

Icy Dock MB123SRCK-1B Manual

6 September 2024
Vantec

Vantec UGT-CR615 Manual

5 September 2024
CSL

CSL 300921 Manual

3 September 2024
CSL

CSL 300368 Manual

3 September 2024
CSL

CSL 300663 Manual

3 September 2024