StarTech.com FCREADU3C Manual


Læs nedenfor 📖 manual på dansk for StarTech.com FCREADU3C (2 sider) i kategorien Geheugenkaartlezer. Denne guide var nyttig for 4 personer og blev bedømt med 4.5 stjerner i gennemsnit af 2 brugere

Side 1/2
Instruction manual
FR: Guide de l’utilisateur - fr.startech.com
DE: Bedienungsanleitung - de.startech.com
ES: Guía del usuario - es.startech.com
NL: Gebruiksaanwijzing - nl.startech.com
PT: Guia do usuário - pt.startech.com
IT: Guida per l’uso - it.startech.com
Manual Revision: 08/09/2016
For the latest information, technical specications, and support for
this product, please visit www.StarTech.com/FCREADU3C.
Package contents
1 x multi-card reader and writer
1 x instruction manual
System requirements
microSD™ card, SD™ card, or CompactFlash® card
Computer, tablet, or device enabled with a USB Type-C™ port
The FCREADU3C is OS independent and doesn’t require any
additional drivers or software. The FCREADU3C receives enough
power through the USB bus and doesn’t require an additional power
source.
System requirements are subject to change. For the latest
requirements, please visit www.StarTech.com/FCREADU3C.
FCREADU3C
USB 3.0 Flash Memory Multi-Card Reader/Writer with USB-C
*actual product may vary from photos
Introduction
The FCREADU3C provides a quick and easy way to access data stored
on dierent types of media cards, and supports data transfers at
speeds up to 5Gbps. You can use this card reader with a computer,
tablet, or device that’s enabled with a USB-C™ port.
Product diagram
SD card slot microSD card slot
CompactFlash card slot
USB-C plug
About USB 3.0 and USB 3.1 Gen 1
USB 3.0 is also known as USB 3.1 Gen 1. This connectivity standard
oers speeds up to 5Gbps.
Note: Data transfer rates are dependent upon the speed of the
memory card you are using and the speed capabilities of the USB
port on your host device.
Card support
The FCREADU3C supports the following types of memory cards:
microSD, microSDHC™, microSDXC™
CompactFlash Type I and Type II card
Secure Digital (SDSC), Secure Digital eXtended Capacity (SDXC™)
card, Secure Digital High Capacity (SDHC™) card
Use the FCREADU3C
1. Gently slide a memory card into the appropriate card slot on the
FCREADU3C until you feel resistance and the card is fully inserted.
2. Insert the on the USB card reader into the USB port USB-C plug
on your computer, tablet, or device.
3. To access content on the USB card reader, follow the instructions
specic to the OS that youre running.
Note: Avoid inserting multiple cards into the card reader at the same
time. You can only access data stored on one card at a time.
Troubleshooting
I can’t access the data stored on my cards
If you’re experiencing issues when you try to access the data stored
on your memory card, consider the following:
Some operating systems may not support all le formats. Make
sure that the operating system you’re using supports the type of
memory card and the les that you’re trying to access.
If you insert multiple memory cards into the FCREADU3C, you
won’t be able to access the data stored on the cards at the same
time. Make sure that you only insert one memory card in the card
reader.
Note: The FCREADU3C prioritizes card access based on the most
recent memory card that was inserted.


Produkt Specifikationer

Mærke: StarTech.com
Kategori: Geheugenkaartlezer
Model: FCREADU3C

Har du brug for hjælp?

Hvis du har brug for hjælp til StarTech.com FCREADU3C stil et spørgsmål nedenfor, og andre brugere vil svare dig




Geheugenkaartlezer StarTech.com Manualer

Geheugenkaartlezer Manualer

Nyeste Geheugenkaartlezer Manualer

Hama

Hama 123948 Manual

18 September 2024
Icy Dock

Icy Dock MB123SRCK-1B Manual

6 September 2024
Vantec

Vantec UGT-CR615 Manual

5 September 2024
CSL

CSL 300921 Manual

3 September 2024
CSL

CSL 300368 Manual

3 September 2024
CSL

CSL 300663 Manual

3 September 2024
CSL

CSL 300020 Manual

3 September 2024
CSL

CSL 304414 Manual

3 September 2024
CSL

CSL 300270 Manual

3 September 2024
CSL

CSL 301511 Manual

3 September 2024