Supermicro A3SEV-2C-LN4 Manual
Supermicro
Bundkort
A3SEV-2C-LN4
Læs nedenfor 📖 manual på dansk for Supermicro A3SEV-2C-LN4 (1 sider) i kategorien Bundkort. Denne guide var nyttig for 3 personer og blev bedømt med 4.5 stjerner i gennemsnit af 2 brugere
Side 1/1
SUPERMICR R
ContaCt nformatIon I
• Manuals: http://www.supermicro.com/support/manuals
• Drivers & Utilities: https://www.supermicro.com/wdl/driver/
• Safety: http://www.supermicro.com/about/policies/safety_information.cfm
© 2023 Supermicro Computer Inc. All rights reserved. Reproduction of this document whether in part or in whole is strictly prohibited without Supermicro's written
consent. All Trademarks are property of their respective entities. All information provided is deemed accurate at the time of printing; however, it is not guaranteed.
P CaCkage ontents
A3SEV-2C/4C-LN4
Q R G 1.0uiCk EfERENCE uidE b
• One Supermicro Motherboard
• One Quick Refernce Guide
• Two SATA Cables
• Website: www.supermicro.com
• General Information: marketing@supermicro.com
• Technical Support: support@supermicro.com
• Phone: +1 (408) 503-8000, Fax: +1 (408) 503-8008
F or your system to work properly please download appropriate,
drivers images user s manual From the links below/ / ' :
MNL-2355-QRG-10b
WARNING: This product can expose you to chemicals including
lead, known to the State of California to cause cancer and birth
defects or other reproductive harm. For more information, go
to www.P65Warnings.ca.gov.
!
JSMB1
JPAC1
MH4
FAN1
JSTBY1
JPME2
JPH1
BT1
JPUSB1
FANA
JD1JP1
MH3
MH2
JPL4
JEDP1
DIMMB1
DIMMA1
JL1
JSD1
I-SATA0
JTPM1
JMD2
LED2
I-SATA1
JMD2_SRW1
JPV1
JPWR1
U2
JITP1
JSIM1
JGP1
JMD1
JF1
59
2
30
19
19
2
12
24
2
BAR CODE
REV:1.00
A3SEV-2C-LN4
DESIGNED IN USA
BIOS LICENSE
JPL4:
M.2-H PCI-E 3.0 X2/I-SATA0 M.2-P PCI-E 3.0 X1
2-3:DISABLE
PCH SLOT1 PCI-E 3.0 X2 (IN X8)
USB6/7(3.1)
AUDIO FP
1-2:ENABLE
COM3/4
POWER
X OH/FF
JF1
2-3:DISABLE
1-2:ENABLE
NIC
1
NIC
2
PWR
DEL DEL
HDD
CPU
USB0/1
LAN3/4 LAN1/2
1-2:NORMAL
:SUPER DOM
VGA
RST
PWR
ON
JPUSB1:
1-4:SPEAKER
1-2:ENABLE
JPT1:
2-3:DISABLE
HDMI/DP
USB4/5
USB2/3
COM1/2
JPAC1:
USB0/1 WAKE UP
DOM
2-3:ME MANUFACTURING MODE
1-2:ENABLE
JPME2:
2-3:DISABLE
SATA
MH1
JPT1
JBT1
Jumpers, Connectors, and LED Indicators
Memory Support
Motherboard Layout and Features
Note: Graphics shown in this quick reference guide are for illustration only. Your components may or may not look exactly the same as drawings shown in this
guide.
Note: Refer to Chapter 1 of the User Manual for detailed information on jumpers, connectors,
and LED indicators.
Note: Refer to Chapter 2 of the User Manual for detailed information on memory support and CPU/
motherboard installation instructions.
Front Control Panel (JF1)
CPU Support
The A3SEV-2C/4C-LN4 motherboard supports up to 32GB of DDR4 Non-ECC
SO-DIMM with speeds of up to 3200MT/s in two slots.
A3SEV-2C-LN4 supports an Intel® Atom x6211E 2 Core Processor.
A3SEV-4C-LN4 supports an Intel Atom x6425E 4 Core Processor.
Connector Description
AUDIO FP Front Panel Audio Header
BT1 Onboard battery
COM1/2, COM3/4 COM Headers
FAN1, FANA System Fan Headers
HDMI/DP++ High Denition Multimedia Interface and DisplayPort
I-SATA0, I-SATA1 SATA 3.0 Ports (I-SATA0: SuperDOM)
JD1 Speaker/Buzzer (Pins 1-4: Speaker)
JEDP1 Extended DisplayPort
JF1 Front Control Panel Header
JGP1 General Purpose I/O Header
JL1 Chassis Intrusion Header
JMD1 M.2 B-Key 2280/3042 (PCIe 3.0 x2/SATA/USB3.1) Slot
*SATA mux with I-SATA0
JMD2 M.2 E-Key 2230 (PCIe 3.0 x1/USB2.0) Slot
JMD2_SRW1 M.2 Mounting Screw
JPH1 4-pin Power Connector (for HDD)
JPV1 4-pin 12V DC Power Connector
JPWR1 24-pin ATX Power Connector
JSD1 SATA DOM Power Connector
JSIM1 Nano SIM Card Slot
JSMB1 System Management Bus Header
JSTBY1 Standby Power Header
JTPM1 Trusted Platform Module (TPM)/Port80 Header
LAN1/2, LAN3/4 Gigabit Ethernet RJ45 Ports
SLOT1 PCH SLOT1 PCIe 3.0 p1-x2 (IN x8) Slot
USB0/1 Back Panel USB 2.0 Ports
USB2/3, USB4/5 USB 2.0 Headers
USB6/7 Back Panel USB 3.1 Ports
VGA VGA Port
Jumper Description Default
JBT1 CMOS Clear Open: Normal
JP1 SIM Detection Pins 1-2 (High Active)
JPAC1 Audio Enable/Disable Pins 1-2 (Enabled)
JPL4 LAN4 Enable/Disable Pins 1-2 (Enabled)
JPME2 ME Manufacturing Mode Pins 1-2 (Normal)
JPT1 EnabledOnboard TPM Enable/Disable Pins 1-2 ( )
JPUSB1 USB0/1 Wake Up Pins 1-2 (Enabled)
Back Panel I/O Connectors
19
8
7
6
5
4
3
210
11
Power Button
OH/Fan Fail LED
NIC1 Active LED
Reset Button
HDD LED
PWR LED
3.3V Stby
Ground
Ground
NIC2 Active LED
3.3V
1 2
15 16
XX
3.3V Stby
3.3V Stby
3.3V
Jumpers
Connectors
LED Description Status
LED2 Power LED Solid Green: Power On
LED Indicators
SO-DIMM Memory Installation
Align
1. Position the SO-DIMM module's bottom key so it aligns with the receptive
point on the slot.
2. Insert the SO-DIMM module vertically at about a 45 degree angle. Press
down until the module locks into place. The side clips will automatically
secure the SO-DIMM module, locking it into place.
Insert this end rst
Locking Clip
SO-DIMM Removal
1. Push the side clips at the end of slot to release the SO-DIMM module. Pull
the SO-DIMM module up to remove it from the slot.
# # #Denition Description Description
1 5 9HDMI USB0 LAN3
2 6DP++ USB1 10 LAN4
3 7USB6 (3.1) LAN1 VGA11
4 8USB7 (3.1) LAN2
*Due to the motherboard dimensions, there is a size limitation for the PCIe card. If
you use the COM port and PCIe slot simultaneously, the recommended PCIe card
size is p1-x8 or smaller.
Produkt Specifikationer
| Mærke: | Supermicro |
| Kategori: | Bundkort |
| Model: | A3SEV-2C-LN4 |
Har du brug for hjælp?
Hvis du har brug for hjælp til Supermicro A3SEV-2C-LN4 stil et spørgsmål nedenfor, og andre brugere vil svare dig
Bundkort Supermicro Manualer
6 Oktober 2024
4 September 2024
3 September 2024
3 September 2024
1 September 2024
1 September 2024
1 September 2024
1 September 2024
1 September 2024
1 September 2024
Bundkort Manualer
- Bundkort Asus
- Bundkort Gigabyte
- Bundkort Asrock
- Bundkort MSI
- Bundkort NZXT
- Bundkort ECS
- Bundkort Intel
- Bundkort Sharkoon
- Bundkort Biostar
- Bundkort Evga
- Bundkort Foxconn
- Bundkort Elitegroup
- Bundkort EPoX
Nyeste Bundkort Manualer
10 Oktober 2024
10 Oktober 2024
8 Oktober 2024
3 Oktober 2024
3 Oktober 2024
1 Oktober 2024
1 Oktober 2024
30 September 2024
29 September 2024
27 September 2024