Supermicro X14SBI-F Manual
Supermicro
Bundkort
X14SBI-F
Læs nedenfor 📖 manual på dansk for Supermicro X14SBI-F (1 sider) i kategorien Bundkort. Denne guide var nyttig for 6 personer og blev bedømt med 4.5 stjerner i gennemsnit af 2 brugere
Side 1/1
SUPERMICR R
ContaCt nformatIon I
• Manuals: http://www.supermicro.com/support/manuals
• Drivers & Utilities: https://www.supermicro.com/wdl/driver/
• Safety: http://www.supermicro.com/about/policies/safety_information.cfm
© 2024 Supermicro Computer Inc. All rights reserved. Reproduction of this document whether in part or in whole is strictly prohibited without Supermicro's written
consent. All Trademarks are property of their respective entities. All information provided is deemed accurate at the time of printing; however, it is not guaranteed.
P CaCkage ontents
X14sBI-f/-tf
Q r g 1.0uICk eferenCe uIde 0
• One Supermicro Motherboard
• One Quick Reference Guide
• One I/O Shield
• One SATA Cable • Two CPU Carriers
• Website: www.supermicro.com
• General Information: marketing@supermicro.com
• Technical Support: support@supermicro.com
• Phone: +1 (408) 503-8000, Fax: +1 (408) 503-8008
f or your system to work ProPerly Please download aPProPrIate,
drIvers Images user s manual from the lInks Below/ / ' :
MNL-2712-QRG-100
WARNING: This product can expose you to chemicals including
lead, known to the State of California to cause cancer and birth
defects or other reproductive harm. For more information, go
to www.P65Warnings.ca.gov.
!
SAN MAC
DESIGNED IN USA
REV:1.01
X14SBI-F
MAC CODE
IPMI CODE
BIOS LICENSE
BAR CODE
+
JPCIE3
BT1
JNVME1
JNVME6
JNVME5
JNVME4JNVME3
JNVME2
JS1
JPCIE1
JPCIE6
JPCIE4
JPCIE5
JPCIE2
JDB1
JTPM1
JRK1
JDB2
LEDBMC
LED6
LEDPWR
LED7
LED4
MH11 MH10
JBT1
JSTBY1
JPL3
JPL2
JPT1
JPL1
JMP2
JMP1
JDB3
JNVI2C1 JBPNI2C1
JSEN1 JIPMB1
JPI2C1
JPRG1
JPWR2 JPWR1
JF1
J35
JNCSI1
JPWR3
JM2_1
JM2_2
JUIDB1
JVRM4
JVRM3
JTIMED
JVRM2
JVRM1 JSYSID2
JSYSID1
JPFR3
JPFR2
JL1
FANA
FANB FAN1
FAN2
FAN3FAN4
FAN5
MH4
MH9
MH3
H5
MH8
MH1
MH2
MH6
MH7
JCOM1
CPU SLOT6 PCIe 5.0 x16
CPU SLOT5 PCIe 5.0 x8
CPU SLOT4 PCIe 5.0 x8
CPU SLOT3 PCIe 5.0 x16
CPU SLOT2 PCIe 5.0 x8
CPU SLOT1 PCIe 5.0 x16
USB2/3(3.0)
(3.0)
NVMe10/11
NVMe8/9
2211022110
M.2-C1
CMOS
5 V STBY po wer
Hea der for
NVMe4/5 NVMe6/7
CHASSIS INTRUSION
SATA0–3
DIMMF1
DIMME1
DIMMH1
DIMMG1
NVMe2/3
NVMe0/1
DIMMC1
DIMMD1
DIMMA1
DIMMB1
PWR I2C
RAID KEY-1
TPM/PORT80
M.2-C2
ON
PWR R ST
LED
UID
FAI L
PS
NM ILED X
PWR
LED
HDD
1
NIC
2
NIC
1-2:EN ABLE
2-3:D ISABLE
JPL2 :LAN2
2-3:D ISABLE
1-2:EN ABLE
JPL1 :LAN
USB0/1
BMC_LAN
LAN1
1-2:EN ABLE
2-3:D ISABLE
JPL3 :LAN1 /2
LAN2
CLEAR
VGA
UID-LED
UID-SW
CPU
Jumpers and Connectors
Processor and Memory Support
Motherboard Layout and Features
Note: Graphics shown in this quick reference guide are for illustrative purposes only. Your components may or may not look exactly the same as drawings shown in this
guide. Note: Refer to Chapter 1 of the User Manual for detailed information on jumpers, connectors,
and LED indicators.
Note: Refer to Chapter 2 of the User Manual for detailed information on memory support and
processor/motherboard installation instructions.
= mounting hole
LED Indicators
Jumper Description Default Setting
JBT1 CMOS Clear Open (Normal)
JPL1 LAN1 Enable/Disable (I210, X14SBI-F
only)
Pins 1–2 (Enabled)
Pins 2–3 (Disabled)
JPL2 LAN2 Enable/Disable (I210, X14SBI-F
only)
Pins 1–2 (Enabled)
Pins 2–3 (Disabled)
JPL3 LAN 1/2 Enable/Disable (X550, X14SBI-
TF only)
Pins 1–2 (Enabled)
Pins 2–3 (Disabled)
JPT1 TPM 2.0 Enable/Disable Pins 1–2 (Enabled)
Pins 2–3 (Disabled)
JVRM1 VRM SMB Clock (to BMC) Pins 1–2 (Normal)
JVRM2 VRM SMB Data (to BMC) Pins 1–2 (Normal)
LED Description Status
LED4 M.2 LED Blinking: Device Working
LED6 Unit Identier LED Solid Blue: Unit Identied
LED7 M.2 LED Blinking: Device Working
LEDBMC BMC Heartbeat Blinking Green: Device Working
LEDPWR Power LED Solid Green: Power On Blinking
Connector Description
BMC_LAN Dedicated BMC LAN Port
BT1 Onboard Battery
FAN1–FAN5, FANA,
FANB Processor/System Fan Headers (FAN1: CPU Fan)
J35 USB 3.2 Gen 1 Header (USB2/3)
JBPNI2C1 4-pin BMC External I2C Header
JCOM1 COM Header
JF1 Front Control Panel Header
JIPMB1 System Management Bus Header (for IPMI only)
JL1 Chassis Intrusion Header
JM2_1, JM2_2 M.2 M-Key PCIe 5.0 p1-x2 Slots (supports 22110 form factor)
JNCSI1 NC-SI Port Selection
JNVI2C1 Non-volatile Memory (NVMe) I2C Header
JNVME1–JNVME6 MCIO PCIe 5.0 p1-x8 Connectors
JPI2C1 Power I2C System Management Bus (Power SMB) Header
JPWR1, JPWR2 8-pin 12 V CPU Power Connector
JPWR3 24-pin ATX Power Connector (Required)
JRK1 Intel® RAID Key Header
JS1 Slimline SAS SATA 3.0 Ports
JSEN1 Inlet Sensor Header
JSTBY1 Standby Power Header
JTPM1 Trusted Platform Module/Port 80 Header
JUIDB1 Unit Identier Button
LAN1, LAN2 LAN (RJ45) Ports
MH1–MH9 Mounting Holes
MH10, MH11 M.2 Mounting Holes
Front Control Panel
Connectors and LED Indicators
Connectors
Connector Description
SLOT1 PCIe 5.0 p1-x16 Slot with Latch
SLOT2 PCIe 5.0 p1-x8 Slot
SLOT3 PCIe 5.0 p1-x16 Slot
SLOT4 PCIe 5.0 p1-x8 Slot
SLOT5 PCIe 5.0 p1-x8 Slot
SLOT6 PCIe 5.0 p1-x16 Slot with Latch
USB0/1 I/O Panel USB 3.2 Gen 1 Ports
VGA VGA Port
OH/Fan Fail LED
20
NIC1 Activity LED
19
HDD LED
PWR LED
+3.3 V Stby
+3.3 V Stby
UID LED
X
Ground
NMI
X
NIC2 Activity LED
3.3 V Stby
+3.3 V Stby
Power Button
Reset ButtonReset
PWR GND
GND
1 2
Power Fail LED+3.3 V
The X14SBI-F/-TF motherboard supports the Intel
® Xeon® 6700-series proces-
sors.
The motherboard supports up to 1 TB of DDR5 ECC RDIMM with speeds of up
to 6400 MT/s in eight DIMM slots.
Connectors
Jumpers
I/O Ports
# #Description Description
1. BMC_LAN 5. LAN2
2. 6. VGAUSB0 (3.2 Gen 1)
3. 7.USB1 (3.2 Gen 1) UID Button
4. LAN1
1
7654
3
2
Processor and PHM Installation
1
1
1
2
1
3
Assemble the processor carrier assembly by
aligning and placing one end of the processor into
the latch marked A, and place the other end of
processor into the latch marked B.
To form the processor heatsink module (PHM),
mount the processor carrier assembly onto the
heatsink and snap into place.
After assembling the PHM, mount it onto the
processor socket. With a T30 bit torque driver
set to a force of 8.0 in-lbf (0.904 N-m), gradually
tighten the four screws.
The processor carriers (SKT-1543H-0000-FXC
and SKT-1544H-0000-FXC) are included in the
shipping package.
1
23
4
B
A
b
a
Processor Key
Processor Key
Processor Key
Processor Key
Latch
Latch
Latch
Latch
3
4
5
6
7
8
9
1
0
1
1
in-lbf
8.0
0.904
N-m
Number of
DIMMs Memory Population Sequence
1 DIMMA1
4DIMMA1/DIMMC1/DIMME1/DIMMG1
DIMMB1/DIMMD1/DIMMH1/DIMMF1
8DIMMA1/DIMMB1/DIMMC1/DIMMD1/DIMME1/DIMMF1/DIMMG1/
DIMMH1
Produkt Specifikationer
| Mærke: | Supermicro |
| Kategori: | Bundkort |
| Model: | X14SBI-F |
Har du brug for hjælp?
Hvis du har brug for hjælp til Supermicro X14SBI-F stil et spørgsmål nedenfor, og andre brugere vil svare dig
Bundkort Supermicro Manualer
18 December 2024
6 December 2024
6 December 2024
6 December 2024
6 December 2024
6 December 2024
5 December 2024
6 Oktober 2024
4 September 2024
3 September 2024
Bundkort Manualer
- Bundkort Asus
- Bundkort Gigabyte
- Bundkort Asrock
- Bundkort MSI
- Bundkort NZXT
- Bundkort ECS
- Bundkort Sapphire
- Bundkort Intel
- Bundkort Sharkoon
- Bundkort Biostar
- Bundkort Evga
- Bundkort Foxconn
- Bundkort Advantech
- Bundkort Elitegroup
- Bundkort EPoX
- Bundkort AOpen
Nyeste Bundkort Manualer
13 Januar 2025
13 Januar 2025
12 Januar 2025
12 Januar 2025
12 Januar 2025
12 Januar 2025
12 Januar 2025
12 Januar 2025
12 Januar 2025
12 Januar 2025