Supermicro X12SPI-TF Manual
Supermicro
Bundkort
X12SPI-TF
Læs nedenfor 📖 manual på dansk for Supermicro X12SPI-TF (1 sider) i kategorien Bundkort. Denne guide var nyttig for 2 personer og blev bedømt med 4.5 stjerner i gennemsnit af 2 brugere
Side 1/1
SUPERMICR R
Contact Information
• Manuals: http://www.supermicro.com/support/manuals
• Drivers & Utilities: https://www.supermicro.com/wdl/driver/
• Safety: http://www.supermicro.com/about/policies/safety_information.cfm
© 2022 Supermicro Computer Inc. All rights reserved. Reproduction of this document whether in part or in whole is strictly prohibited without Supermicro's written
consent. All Trademarks are property of their respective entities. All information provided is deemed accurate at the time of printing; however, it is not guaranteed.
P cackage ontents
X12SPi-TF
Quick Reference Guide Rev. 1.0b
• One Supermicro Motherboard
• Two SATA Cables
• One I/O Shield
• One Quick Reference Guide
• Website: www.supermicro.com
• General Information: marketing@supermicro.com
• Technical Support: support@supermicro.com
• Phone: +1 (408) 503-8000, Fax: +1 (408) 503-8008
F or your system to work properly please download appropriate,
drivers images user s manual From the links below/ / ' :
MNL-2225-QRG-10b
WARNING: This product can expose you to chemicals including
lead, known to the State of California to cause cancer and birth
defects or other reproductive harm. For more information, go
to www.P65Warnings.ca.gov.
!
A
B
Pin 1
Connectors
Connectors, LED Indicators, and Jumpers
Back Panel I/O Connectors
Memory Support
Motherboard Layout and Features
LED Indicators
Note: Graphics shown in this quick reference guide are for illustration only. Your components may or may not look exactly the same as drawings shown in this
guide.
Note: Refer to Chapter 1 of the User Manual for detailed information on jumpers, connectors,
and LED indicators.
Note: Refer to Chapter 2 of the User Manual for detailed information on memory support and CPU/
motherboard installation instructions.
CPU Support
The X12SPi-TF motherboard supports the 3rd generation Intel® Xeon Scalable
Processor (Socket P+ (LGA4189) processors with up to 40 cores and a thermal
design power (TDP) of up to 270W.
Connector Description
COM1 COM Header
FAN1 - FAN5, FANA, FANB CPU/System Fan Headers
I-SATA0 - I-SATA7 Intel® PCH SATA 3.0 Ports (with RAID 0, 1, 5, 10)
IPMI _LAN Dedicated IPMI LAN Port
JF1 Front Control Panel Header
JI2C_EXP1 SMBus I2C for Expander
JI2C_FP1 SMBus I2C for LCD Devices
JIPMB1 4-pin BMC External I2C Header (for an IPMI card)
JL1 Chassis Intrusion Header
JNCSI NC-SI Header for IPMI Support
JNVI2C1 NVMe I2C Header
JPI2C1 Power System Management Bus (SMB) I2C Header
JPWR1 8-pin Power Connector
JPWR2 4-pin Power Connector
JPWR3 24-pin Power Connector
JRK1 Intel RAID Key Header
JSD1, JSD2 SATA DOM Power Connectors
JSTBY1 Standby Power Header
LAN1, LAN2 Dual 10G Base-T Ports
M.2-H M.2 M-Key 2280/22110 (supports PCIe 3.0 x4/SATA3) Slot
NVME0/1 PCIe 4.0 Slimline SAS Connector
SLOT1 CPU PCIe 4.0 x8
SLOT2 CPU PCIe 4.0 p1-x8 (IN x 16)
SLOT4, SLOT6 CPU PCIe 4.0 x16
SLOT7 CPU PCIe 4.0 x8
S-SATA0, S-SATA1 SATA 3.0 Ports with SATA DOM Power
S-SGPIO1 Serial Link General Purpose I/O Connection Header
TPM/PORT80 Trusted Platform Module/Port 80 Connector
UID-SW Unit Identier (UID) Switch
USB0/1 Back Panel Universal Serial Bus (USB) 2.0 Ports
USB2/3 Front Accessible USB 2.0 Headers
USB4/5 Back Panel USB 3.2 Gen 1 Ports
USB6/7 Front Accessible USB 3.2 Gen 1 Header
USB8 USB 3.2 Gen 1 Type-A Header
VGA VGA Port
LED Description Status
LE4 M.2 LED Blinking Green: Device Working
LEDBMC BMC Heartbeat LED Blinking Green: BMC Normal
LEDPWR Onboard Power LED Solid Green: Power On
UID-LED Unit Identier (UID) LED Solid Blue: Unit Identied
= mounting hole
BIOS LICENSE
BAR CODEMAC CODE
SAN MAC
DESIGNED IN USA
X12SPi-TF
REV: 2.00
IPMI CODE
JI2C_FP1
PCH
621A
BMC
AST2600 X550
S-SGPIO1
JBT1
JPWR2
JSD2
JSD1
S-SATA1S-SATA0
JSTBY1
JRK1
JPWR3
JPWR1
JNCSI
JF1
JVRM2
JVRM1
JPFR3
JPFR2
JPFR1
JL1
JPRG1
JPCK1 JPME1
JP4
FAN4
FAN3
FANB FANA
FAN5
FAN2
FAN1
NVME 0/1
MH16
MH15
UID_SW
JPI2C1
JI2C_EXP1
JNVI2C
JIPMB1
MH4
MH6
MH1
MH9
MH8
MH7
MH5
MH3
MH2
VGA
BT1
JMP1
JMP2
LEDPWR
I-SATA4-7
M.2-H
COM1
DIMMG1
DIMMH1
DIMME1
DIMMF1
DIMMA1
DIMMB1
DIMMD1
DIMMC1
CPU
USB8(3.2 Gen 1)
USB6/7(3.2 Gen 1)USB2/3
IPMI_LAN
LAN2 LAN1
I-SATA0-3
TPM/PORT80
UID-LED
CPU SLOT7 PCIe 4.0 X8
CPU SLOT6 PCIe 4.0 X16
CPU SLOT4 PCIe 4.0 X16
CPU SLOT2 PCIe 4.0 X8(IN X16)
CPU SLOT1 PCIe 4.0 X8
USB4/5 (3.0)
LE4
USB 0/1
LEDBMC
Power Button
UID LED
NIC1 Active LED
Reset Button
HDD LED
PWR LED
Reset
PWR
UID_SW
3.3V Stby
Ground
19
X
Ground
X
3.3V Stby
20
1 2
Ground
Power Fail LED
NIC2 Active LED
NMI
3.3V
OH/Fan Fail LED
3.3V Stby
The X12SPi-TF Supports up to 2048GB of ECC RDIMM/LRDIMM/LRDIMM 3DS
with speeds of up to 3200MHz in eight slots. See below for additional memory
information.
• It's recommended to use DDR4 memory of the same type, size and speed.
Mixed DIMM speeds can be installed. However, all DIMMs will run at the
speed of the slowest DIMM.
• The motherboard will not support odd-numbered modules except for a single
DIMM module necessary for board operation. For more information, refer to
https://www.supermicro.com/support/resources/memory/X12_memory_con-
g_guide.pdf.
• To achieve the best memory performance, a balanced memory population is
recommended.
• Memory capacity and frequency is CPU dependent.
Front Control Panel (JF1)
CPU and PHM Installation
1
1
1
2
1
3
Assemble the processor carrier assembly by inserting
the CPU into the processor carrier.
To form the processor heatsink module (PHM), mount
the processor carrier assembly onto the heatsink and
snap into place.
After assembling the PHM, mount it onto the CPU
socket of the motherboard. Use a T-30 Torx-bit
screwdriver to gradually install four screws into the
mounting holes from #1-4.
Allow carrier to
latch onto C PU
Allow carrier to
latch onto C PU
Allow carrier to
latch onto C PU
Allow carrier to
latch onto C PU
Mounting the Processor
Heatsink Module onto
the CPU socket (on the
motherboard)
Use a torque
of 12 lbf-in
T30 Torx Screwdriver
T e screws in ighten th
the sequence of 1, 2, 3, 4
#1
#2
#3 #4
Prin ted T riang le
1
51
9
1
4
1
8
1
3
1
7
1
21
6
1
1
# #Description Description
1 6Dedicated IPMI LAN LAN1
2 7USB1 LAN2
3 8USB0 VGA Port
4 9USB5 (3.2 Gen 1) UID Switch
5 USB4 (3.2 Gen 1)
1 CPU, 8-DIMM Slots
Number of DIMMs Memory Population Sequence
1 DIMMA1
2 DIMMA1 / DIMME1
4 DIMMA1 / DIMME1 / DIMMC1 / DIMMG1
6 DIMMA1 / DIMME1 / DIMMC1 / DIMMG1 / DIMMB1 / DIMMF1
8DIMMA1 / DIMME1 / DIMMC1 / DIMMG1 / DIMMB1 / DIMMF1 /
DIMMD1 / DIMMH1
Jumper Description Default Setting
JBT1 CMOS Clear Open (Normal)
JPME1 ME Recovery Pins 1-2 (Normal)
Jumpers
Produkt Specifikationer
| Mærke: | Supermicro |
| Kategori: | Bundkort |
| Model: | X12SPI-TF |
Har du brug for hjælp?
Hvis du har brug for hjælp til Supermicro X12SPI-TF stil et spørgsmål nedenfor, og andre brugere vil svare dig
Bundkort Supermicro Manualer
6 Oktober 2024
4 September 2024
3 September 2024
3 September 2024
1 September 2024
1 September 2024
1 September 2024
1 September 2024
1 September 2024
1 September 2024
Bundkort Manualer
- Bundkort Asus
- Bundkort Gigabyte
- Bundkort Asrock
- Bundkort MSI
- Bundkort NZXT
- Bundkort ECS
- Bundkort Intel
- Bundkort Sharkoon
- Bundkort Biostar
- Bundkort Evga
- Bundkort Foxconn
- Bundkort Elitegroup
- Bundkort EPoX
- Bundkort AOpen
Nyeste Bundkort Manualer
23 November 2024
20 November 2024
20 November 2024
16 November 2024
16 November 2024
13 November 2024
13 November 2024
13 November 2024
13 November 2024
13 November 2024