Supermicro X12SPZ-LN4F Manual
Supermicro
Bundkort
X12SPZ-LN4F
Læs nedenfor 📖 manual på dansk for Supermicro X12SPZ-LN4F (1 sider) i kategorien Bundkort. Denne guide var nyttig for 6 personer og blev bedømt med 4.5 stjerner i gennemsnit af 2 brugere
Side 1/1
SUPERMICR R
ContaCt nformatIon I
• Manuals: http://www.supermicro.com/support/manuals
• Drivers & Utilities: https://www.supermicro.com/wdl/driver/
• Safety: http://www.supermicro.com/about/policies/safety_information.cfm
© 2022 Supermicro Computer Inc. All rights reserved. Reproduction of this document whether in part or in whole is strictly prohibited without Supermicro's written
consent. All Trademarks are property of their respective entities. All information provided is deemed accurate at the time of printing; however, it is not guaranteed.
P CaCkage ontents
X12sPZ-sPLn6f/Ln4f
Q r g 1.0uICk eferenCe uIde a
• One Supermicro Motherboard
• One Quick Reference Guide
• One I/O Shield
• Two SATA Cables • One CPU Carrier
• Website: www.supermicro.com
• General Information: marketing@supermicro.com
• Technical Support: support@supermicro.com
• Phone: +1 (408) 503-8000, Fax: +1 (408) 503-8008
f or your system to work ProPerLy PLease downLoad aPProPrIate,
drIvers Images user s manuaL from the LInks beLow/ / ' :
MNL-2291-QRG-10a
WARNING: This product can expose you to chemicals including
lead, known to the State of California to cause cancer and birth
defects or other reproductive harm. For more information, go
to www.P65Warnings.ca.gov.
!
X12SPZ-LN4F
REV: 2.00
DESIGNED IN USA
LEDBMC
LEDPWR
JTPM1 JWD1 JD1
COM1 M.2-H
JPG1
JL1
JPME1
JPME2
JBM1
UID
UIDLED
USB0/1 USB2/3 USB6/7
JNS1
JRK1
PCIe 4.0 x8
P1_NVME0
DIMMF1
DIMME1
DIMMH1
DIMMG1
DIMMC1
DIMMD1
DIMMA1
DIMMB1
JPDB1
BAR CODE
VGA
LAN6 LAN5
LAN3/4 LAN1/2 IPMI LAN
USB4/5 (3.0)
JBM2
CPU
JPFR2
JPFR3
JPFR1
JCPLD1
J19
JIPMB1 JNVI2CI
SRW3
JMD1
JADV1
S-SGPIO1
MH9
S-SATA0
S-SATA1
FANB
FANA
J18
JF1 MH2 FAN4 FAN3
JVR1
FAN2 FAN1 MH5
JPV1
MH7
JPH1
JPW1
JPI2C1
JPL2
JLANLED1_1
JLANLED1
MAC CODE
JGP1
CPU1 SLOT6 PCIe 4.0 x16
SRW4
BT1
SFP2 SFP1
CPU1 SLOT4 PCIe 3.0 x16
JBT1
JSTBY1
Intel PCH
621A
MH3
MH4
MH6
JSLIM1
MH8
JTS1
JPL1
JPT1
JSLIM2
PCI-E 4.0 x4
Jumpers and Connectors
CPU and Memory Support
Motherboard Layout and Features
Note: Graphics shown in this quick reference guide are for illustration only. Your components may or may not look exactly the same as drawings shown in this guide. Note: Refer to Chapter 1 of the User Manual for detailed information on jumpers, connectors,
and LED indicators.
Note: Refer to Chapter 2 of the User Manual for detailed information on memory support and CPU/
motherboard installation instructions.
= mounting hole
LED Indicators
Jumper Description Default Setting
JBM1 Disable IPMI Share LAN Pins 1-1 (Enabled)
JBM2 Disable IPMI Dedicated/Share LAN Pins 1-1 (Enabled)
JBT1 CMOS Clear Open (Normal)
JNS1 OCulink to 4x SATA or PCIe p1-x4 Selection Pins 2-3 (PCIe x4)
JPDB1 COM1 Function Selection Pins 1-2 (BMC COM port)
JPG1 VGA Enable/Disable Pins 1-2 (Enabled)
JPL1 LAN5/6 Enable/Disable Pins 1-2 (Enabled)
JPL2 LAN1/2/3/4 Enable/Disable Pins 1-2 (Enabled)
JPME1 ME Recovery Mode Pins 1-2 (Normal)
JPME2 Manufacturing Mode Pins 1-2 (Normal)
JPT1 Onboard TPM Enable/Disable Pins 1-2 (Enabled)
LED Description Status
LEDBMC BMC Heartbeat Blinking Green: BMC Normal
LEDPWR Onboard Power LED Solid Green: Power On
UID LED Unit Identier LED Solid Blue: Unit Identied
Connector Description
BT1 Onboard Battery
COM1 COM Header
FAN1 - FAN4, FANA, FANB CPU/System Fan Headers (FAN1: CPU Fan)
IPMI LAN Dedicated IPMI LAN Port
J18 Extended COMS Battery Connector
JD1 Speaker (Pins 1-3: Power LED, Pins 4-7: Speaker)
JF1 Front Control Panel Header
JGP1 General Purpose I/O Header
JIPMB1 System Mangement Bus Header (for IPMI only)
JL1 Chassis Intrusion Header
JLANLED1 LAN3 - LAN6 Activity LED Header for SPLN6F
JLANLED1_1 LAN3 - LAN4 Activity LED Header for LN4F
JMD1 M.2 M-Key 2242/2280 (PCIe x4/SATA) Slot
JNVI2C1 Non-Volatile Memory (NVMe) I2C Header
JPH1 4-pin HDD Power Connector
JPI 2
C1 Power I2C System Management Bus (Power SMB) Header
JPW1 24-pin ATX Power Connector (Required)
JPV1 8-pin CPU Power Connector (Required)
JRK1 Intel RAID Key Header
JSLIM1 PCIe 4.0 p1-x8 SlimSAS Connector
JSLIM2 PCIe 4.0 p1-x4 SlimSAS Connector
JSTBY1 Standby Power Header
JTPM1 Trusted Platform Module (TPM)/Port 80 Connector
Front Control Panel
Connectors and LED Indicators
Connectors
Connector Description
LAN1/2, LAN3/4 LAN RJ45 Port
LAN5, LAN6 25G/10G Fiber LAN Ports
MH2 - MH9 Mounting Holes
P1_NVME0 OCulink Connector (to 4x SATA or PCIe x4)
S-SATA0, S-SATA1 SATA 3.0 Ports
S-SGPIO1 Serial Link General Purpose I/O Header
SLOT4 CPU1 PCIe 4.0 p1-x16 Slot
SLOT6 CPU1 PCIe 4.0 p1-x16 Slot
SRW3, SRW4 M.2 Mounting Holes
UID Unit Identier Switch
USB0/1, USB2/3 Front Accessible USB 2.0 Headers
USB4/5 Back Panel USB 3.0 Ports
USB6/7 Front Accessible USB 3.0 Header
VGA VGA Port
OH/Fan Fail LED
20
NIC1 Activity LED
19
HDD LED
PWR LED
3.3V Stby
3.3V Stby
UID LED
X
Ground
NMI
X
NIC2 Activity LED
3.3V Stby
3.3V Stby
Power Button
Reset ButtonReset
PWR Ground
Ground
1 2
Power Fail LED3.3V
The X12SPZ-SPLN6F/LN4F motherboard supports a 3rd Generation Intel®
Xeon Scalable Processor with up to 40 cores in a Socket P+ socket.
The motherboard supports up to 2TB of ECC RDIMM and LRDIMM DDR4
memory with speeds of up to 3200MHz in eight memory slots.
Connectors
Jumpers
Back Panel I/O Connectors
# # #Description Description Description
1. 5. LAN1IPMI LAN 9 SFP28 LAN6
2. USB5 6. LAN4 10 VGA Port
3. USB4 7. LAN3 11 UID Switch
4. LAN2 8. SFP28 LAN5
1
987
6
5
4
3
210 11
CPU and PHM Installation
A
B
Pin 1
1
1
1
2
1
3
Assemble the processor carrier assembly by inserting
the CPU into the processor carrier.
To form the processor heatsink module (PHM), mount
the processor carrier assembly onto the heatsink and
snap into place.
After assembling the PHM, mount it onto the CPU
socket of the motherboard. Use a T-30 Torx-bit
screwdriver to gradually install four screws into the
mounting holes from #1-4.
Allow carrier to
latch onto C PU
Allow carrier to
latch onto C PU
Allow carrier to
latch onto C PU
Allow carrier to
latch onto C PU
Mounting the Processor
Heatsink Module onto
the CPU socket (on the
motherboard)
Use a torque
of 12 lbf-in
T30 Torx Screwdriver
T e screws in ighten th
the sequence of 1, 2, 3, 4
#1
#2
#3 #4
Prin ted T riang le
*Please order CPU carrier SKT-1205L-P4IC-FXC
or SKT-1205L-P4IC-TYC from Supermicro to pair
with the CPU heatsink.
Produkt Specifikationer
| Mærke: | Supermicro |
| Kategori: | Bundkort |
| Model: | X12SPZ-LN4F |
Har du brug for hjælp?
Hvis du har brug for hjælp til Supermicro X12SPZ-LN4F stil et spørgsmål nedenfor, og andre brugere vil svare dig
Bundkort Supermicro Manualer
18 December 2024
6 December 2024
6 December 2024
6 December 2024
6 December 2024
6 December 2024
5 December 2024
6 Oktober 2024
4 September 2024
3 September 2024
Bundkort Manualer
- Bundkort Asus
- Bundkort Gigabyte
- Bundkort Asrock
- Bundkort MSI
- Bundkort NZXT
- Bundkort ECS
- Bundkort Sapphire
- Bundkort Intel
- Bundkort Sharkoon
- Bundkort Biostar
- Bundkort Evga
- Bundkort Foxconn
- Bundkort Elitegroup
- Bundkort EPoX
- Bundkort AOpen
Nyeste Bundkort Manualer
20 December 2024
20 December 2024
20 December 2024
20 December 2024
20 December 2024
20 December 2024
19 December 2024
19 December 2024
19 December 2024
19 December 2024