Supermicro X14SBM-TF Manual
Supermicro
Bundkort
X14SBM-TF
Læs nedenfor 📖 manual på dansk for Supermicro X14SBM-TF (1 sider) i kategorien Bundkort. Denne guide var nyttig for 13 personer og blev bedømt med 4.5 stjerner i gennemsnit af 2 brugere
Side 1/1
SUPERMICR R
ContaCt nformatIon I
• Manuals: http://www.supermicro.com/support/manuals
• https://www.supermicro.com/wdl/driver/Drivers & Utilities:
• Safety: http://www.supermicro.com/about/policies/safety_information.cfm
© 2024 Supermicro Computer Inc. All rights reserved. Reproduction of this document whether in part or in whole is strictly prohibited without Supermicro's written
consent. All Trademarks are property of their respective entities. All information provided is deemed accurate at the time of printing; however, it is not guaranteed.
X14SBm-tf/-tP4f
Q r G 1.00uICk eferenCe uIde
• Website: www.supermicro.com
• General Information: marketing@supermicro.com
• Technical Support: support@supermicro.com
• Phone: +1 (408) 503-8000, Fax: +1 (408) 503-8008
f or your SyStem to work ProPerly PleaSe download aPProPrIate,
drIverS ImaGeS uSer S manual from the lInkS Below/ / ' :
MNL-2681-QRG-100
WARNING: This product can expose you to chemicals including
lead, known to the State of California to cause cancer and birth
defects or other reproductive harm. For more information, go
to www.P65Warnings.ca.gov.
!
P CaCkaGe ontentS
• One Supermicro Motherboard
• One Quick Reference Guide
• One CPU Carrier (XCC)
• One CPU Carrier (HCC/LCC)
• One I/O Shield
• Two SATA Cables
FANA
FAN3
CPU
MH7
CN1
CN2
CN3
CN4
MH8
FAN2
FAN1
JPWR3
JPWR2
MH6
JPI2C1
JPWR1
MH3
SFP1
(LAN3)
SFP2
(LAN4)
JVGA1
LED1
(UID-LED)
JUIDB1
(UID-SW)
D4
D3 LED5
LED4
JLAN1
(LAN1)
JLAN2
(LAN2)
FAN4
JUSBRJ1
(USB0/1)
J3 M.2-C
JSD2
JBAT1
JSD1
I-SATA2I-SATA1
M.2_MH4
M.2_MH3
LED6
MH4
JSTBY1
JOH1
JRK1
JL1 JP1
JBT1
JCOM1
JLANLED1
JD1JSEN1
JF1
J1 M.2-C
LE1
JTPM1
MH1
MH2
JPTG1JPG1
LED3
LED2
JNCSI1
CPU SLOT4 PCIe 5.0 x16
CPU SLOT6 PCIe 5.0 x16
CPU SLOT7 PCIe 5.0 x8
MH5
M.2_MH2M.2_MH1
USB1
(USB2/3)
JWD1
BMC
BIOS
CPLD
NIC
BAR CODE
BIOS
LICENSE
BAR CODE
IPMI CODE
MAC CODE
DIMMD1
DIMMC1
DIMMB1
DIMMA1
DIMME1
DIMMF1
DIMMG1
DIMMH1
X14SBM-TF
REV: 1.01
D E S I G N E D I N U S A
Connectors
LED Indicators
Jumpers and ConnectorsMotherboard Layout and Features
Jumpers
Note: Graphics shown in this quick reference guide are for illustrative purposes only. Your components may or may not look exactly the same as drawings shown
in this guide.
Note: Refer to the Component Installation section of the user manual for detailed information on
jumpers, connectors, and LED indicators.
Note: Refer to the Component Installation section of the user manual for detailed information on
memory support and processor/motherboard installation instructions.
= mounting hole
Jumper Description Default Setting
JBT1 Onboard CMOS Clear Open (Normal)
JPG1 VGA Enable/Disable Pins 1–2 (Enable)
JTP1 Onboard TPM 2.0 Enable/Disable Pins 1–2 (Enable)
JPTG1 LAN Enable/Disable Pins 1–2 (Enable)
JWD1 Watchdog Timer Pins 1–2 (Reset)
Connector Description
JBAT1 Onboard CMOS Battery
CPU SLOT4 PCIe 5.0 x16 PCIe 5.0 p1-x16 Slot
CPU SLOT6 PCIe 5.0 x16 PCIe 5.0 p1-x16 Slot
CPU SLOT7 PCIe 5.0 x8 PCIe 5.0 p1-x8 Slot
CN1–CN4 MCIO PCIe 5.0 p1-x8 Connectors
FAN1–FAN4, FANA 4-pin Fan Headers
I-SATA1–I-SATA2 SATA 3.0 Connectors
J1 M.2-C M.2 M-Key 2280/22110 PCIe 5.0 p1-x2 Slot
J3 M.2-C M.2 M-Key 2280/22110 PCIe 5.0 p1-x2 Slot
JCOM1 COM Header
JD1 Internal Speaker Header
JF1 Front Control Panel Header
JL1 Chassis Intrusion Header
JLAN1–JLAN2 10 GbE RJ45 LAN Ports (LAN1–LAN2)
JLANLED1 LAN3/LAN4 Activity LED
JNCSI1 NC-SI Header for IPMI Support
JOH1 Overheat LED Header
JPI2C1 Power Supply SMBus I
2C Header
JPWR1 24-pin ATX Main Power Connector
JPWR2–JPWR3 8-pin 12 V Processor Power Connectors
JRK1 Intel VROC RAID Key Header
JSD1–JSD2 SuperDOM Power Connectors
JSEN1 Inlet Sensor Header
JTPM1 Trusted Platform Module/Port 80 Connector
JUIDB1 Unit Identier Switch
JUSBRJ1 Two USB 3.2 Gen 1 Type-A Ports (USB0/1) and One
Dedicated BMC LAN Port (BMC LAN)
JVGA1 VGA Port
USB1 Two USB 3.2 Gen 1 Ports from Onboard Header
(USB2/3)
LAN3–LAN4 10G SFP+ LAN Ports
(Only X14SBM-TP4F)
MH1–MH5 Motherboard Mounting Holes
M.2_MH1, M.2_MH3 M.2 Mounting Hole for M.2 2280
M.2_MH2, M.2_MH4 M.2 Mounting Hole for M.2 22110
LED Description Status
D3 (Only X14SBM-TP4F) LAN4 Activity LED Flashing Green: Active
D4 (Only X14SBM-TP4F) LAN3 Activity LED Flashing Green: Active
LE1 Power LED Solid Green: Power On
LED1 Unit Identier LED Solid Blue: Unit Identied
LED2 BMC Heartbeat LED Blinking Green: BMC Normal
LED4 (Only X14SBM-TP4F) LAN4 Speed LED Green: 10G Link
Yellow: 1G Link
LED5 (Only X14SBM-TP4F) LAN3 Speed LED Green: 10G Link
Yellow: 1G Link
LED6 Disk Activity LED Flashing Blue: Disk Activity
LED Indicators
Processor and Memory Support
Rear I/O Ports
Front Control PanelProcessor and PHM Installation
The X14SBM-TF/-TP4F motherboard supports an Intel
® Xeon® 6700E-series
processor in Socket E2 LGA 4710 with a TDP of up to 350 W.
The motherboard supports up to 1 TB of DDR5 ECC RDIMM with speeds of up to
6400 MT/s. The motherboard supports 32 GB, 64 GB, and 128 GB DIMM sizes.
2 1
20 19
GND
X
PWR LED
HDD LED
NIC1 Activity LED
NIC2 Activity LED
OH/Fan Failed LED
Power Fail LED
GND
GND
Reset Button
Power Button
3.3 V Stby
3.3 V Stby
Non-Maskable Interrupt
X
3.3 V Stby
3.3 V Stby
PWR
Reset
UID LED
3.3 V
# # #Description Description Description
1. 4. LAN1 7.BMC LAN LAN4 (X14SBM-TP4F)
2. USB0 5. LAN2 8. VGA Port
3. USB1 6. 9.LAN3 (X14SBM-TP4F) UID Switch
1
1
1
2
1
3
Assemble the processor carrier assembly by
aligning and placing one end of the processor into
the latch marked A, and place the other end of
processor into the latch marked B.
To form the processor heatsink module (PHM),
mount the processor carrier assembly onto the
heatsink and snap into place.
After assembling the PHM, mount it onto the
processor socket. With a T30 bit torque driver
set to a force of 8.0 in-lbf (0.904 N-m), gradually
tighten the four screws.
The processor carriers (SKT-1543H-0000-FXC
and SKT-1544H-0000-FXC) are included in the
shipping package.
1
23
4
B
A
b
a
Processor Key
Processor Key
Processor Key
Processor Key
Latch
Latch
Latch
Latch
3
4
5
6
7
8
9
1
0
1
1
in-lbf
8.0
0.904
N-m
Number of
DIMMs Memory Population Sequence (RDIMM)
1 DIMMA1
4DIMMA1/DIMMC1/DIMME1/DIMMG1
DIMMB1/DIMMD1/DIMMH1/DIMMF1
8DIMMA1/DIMMB1/DIMMC1/DIMMD1/DIMME1/DIMMF1/DIMMG1/
DIMMH1
1
4 5 876 92
3
Produkt Specifikationer
| Mærke: | Supermicro |
| Kategori: | Bundkort |
| Model: | X14SBM-TF |
Har du brug for hjælp?
Hvis du har brug for hjælp til Supermicro X14SBM-TF stil et spørgsmål nedenfor, og andre brugere vil svare dig
Bundkort Supermicro Manualer
6 Oktober 2024
4 September 2024
3 September 2024
3 September 2024
1 September 2024
1 September 2024
1 September 2024
1 September 2024
1 September 2024
1 September 2024
Bundkort Manualer
- Bundkort Asus
- Bundkort Gigabyte
- Bundkort Asrock
- Bundkort MSI
- Bundkort NZXT
- Bundkort ECS
- Bundkort Intel
- Bundkort Sharkoon
- Bundkort Biostar
- Bundkort Evga
- Bundkort Foxconn
- Bundkort Elitegroup
- Bundkort EPoX
Nyeste Bundkort Manualer
10 Oktober 2024
10 Oktober 2024
8 Oktober 2024
3 Oktober 2024
3 Oktober 2024
1 Oktober 2024
1 Oktober 2024
30 September 2024
29 September 2024
27 September 2024