Sussex CEBM Manual

Sussex Kran CEBM

Læs nedenfor 📖 manual på dansk for Sussex CEBM (1 sider) i kategorien Kran. Denne guide var nyttig for 4 personer og blev bedømt med 4.5 stjerner i gennemsnit af 2 brugere

Side 1/1
5.0
Licence No. 0124
In ac cord anc e with AS/NZS 6400
Sussex Taps Pty Ltd
WATER RATING
www.waterr ating.g ov.au
The mo re
stars the mo re
water efcient
Product code
Installation guidelines
Plumber note
Calibre
- The Mixer is supplied assembled, only the Fixing nut and the clamp need to be removed.
- After removing the mentioned parts, lower the Mixer on to the mounting surface and fit the Flexible Hoses.
- In some cases the Flexible Hoses may need to be fed through from under the mounting surface and then
attached. (Tighten using appropriate spanner)
- After securing the Flexible Hoses, fit Clamp and attach the Fixing Nut from underneath.
- Before fully securing the Mixer ensure that the Base O Ring is intact and the Mixer is properly centred over the
mounting surface hole.
- The Mixer mounting surface must be completely sealed and water-tight.
- The 1/2” Fittings of the Flexible Hoses have a conical seal, ensure that the matching threads are cut square
and burr free.
- Prior to connecting the Flexible Hoses, ensure all pipework is thoroughly flushed and ensure pipework is free of
any dirt or debri.
- Isolating Stop Valves are recommended with all installations.(not supplied)
- Connect the Flexible Hoses to Hot and Cold pipework fittings, ensure the Hoses do not kink or become twisted
when tightening.
- Check all fittings and connections are secure and water-tight.
- On-site testing using higher water pressures must be conducted with the Mixer in the closed position.
(STATIC TEST)
- Under no circumstances is the Mixer to be opened when exceeding the maximum stated water pressure.
- At the completion of testing, do not relieve any high water pressure by operating the Mixer.
- Exposing the internals of the Mixer Car tridge to higher than specified water pressures will void the
manufacturers warranty.
CBM Basin mixer
CEBM Extended basin mixer
Basin mixer
Tapware is to be installed by a Licensed Plumber in accordance with AS/NZS 3500:2003
Recommended working water pressure 300-500 kpa. Maximum water temperature is 65 deg.c
Copyright © Sussex Taps.sussextaps.com.au


Produkt Specifikationer

Mærke: Sussex
Kategori: Kran
Model: CEBM

Har du brug for hjælp?

Hvis du har brug for hjælp til Sussex CEBM stil et spørgsmål nedenfor, og andre brugere vil svare dig




Kran Sussex Manualer

Sussex

Sussex VEBM120 Manual

31 August 2024
Sussex

Sussex BWBMS210RH Manual

31 August 2024
Sussex

Sussex RWBHS200RH Manual

31 August 2024
Sussex

Sussex RBS Manual

31 August 2024
Sussex

Sussex BLWBMS210RH Manual

31 August 2024
Sussex

Sussex DPWBMS200 Manual

31 August 2024
Sussex

Sussex DBSHMSH Manual

31 August 2024
Sussex

Sussex BLBM Manual

31 August 2024
Sussex

Sussex CWBMS200RH Manual

31 August 2024
Sussex

Sussex DBSHS Manual

31 August 2024

Kran Manualer

Nyeste Kran Manualer

ProFlo

ProFlo PFX3085 Manual

12 December 2024
Rohl

Rohl R7903SLM Manual

11 December 2024
Rohl

Rohl LS59L-2 Manual

11 December 2024
ProFlo

ProFlo PFWSC4746SCP Manual

11 December 2024
ProFlo

ProFlo PFWSC4744SCP Manual

11 December 2024
ProFlo

ProFlo PFWSC4744BN Manual

11 December 2024