Sussex VEBM120 Manual

Sussex Kran VEBM120

Læs nedenfor 📖 manual på dansk for Sussex VEBM120 (1 sider) i kategorien Kran. Denne guide var nyttig for 13 personer og blev bedømt med 4.5 stjerner i gennemsnit af 2 brugere

Side 1/1
7.5
Licence No. 0124
In ac cord anc e with AS/NZS 6400
Sussex Taps Pty Ltd
WATER RATING
www.waterr ating.g ov.au
The mo re
stars the mo re
water efcient
Mounting
Surface
Fixing
Nut Flexible Hose
Clamp
Optional
Base Flange
Hose extension
(Do not remove)
32 - 35mm
Product code
Installation guidelines
Plumber note
Voda
- The Mixer is supplied assembled, only the Fixing nut and the Brass Clamp need to be removed.
- Decide if the Optional Base Flange is to be used.
- If using the Optional Base Flange discard the smaller Base O Ring.
- Add the base Flange to base of Mixer and attach the Flexible Hoses to the Mixer Hose extensions.
- In some cases the Flexible Hoses may need to be fed through from under the mounting surface and then attach.
- Once the Flexible Hoses have been secured, lower the Mixer onto the mounting surface.
- Working from underneath the mounting surface fit Clamp and Fixing Nut.
- Before fully securing the Mixer ensure that the Base O Ring is intact and the Mixer is centered over the
mounting surface hole.
- The Mixer mounting surface must be completely water-tight.
- Connect the Hot and Cold Flexible hoses to the corresponding 1/2”BSP water feed lines.
- The 1/2” connection of the Flexible hoses have a conical seal, ensure the mating threads are cut square and
burr free.
- Isolating stop valves are recommended with all installations (not supplied).
- Ensure all fittings and connections are water-tight.
Note: Optional Base Flange must be used when the clearance hole for mounting the Mixer exceeds 35mm.
If the mounting hole clearance exceeds 45 mm a custom made Base flange will be required.
- On-site testing using higher water pressures must be conducted with the Mixer in the closed position.
(STATIC TEST)
- Under no circumstances is the Mixer to be opened when exceeding the maximum stated water pressure.
- At the completion of testing, do not relieve any high water pressure by operating the Mixer.
- Exposing the internals of the Mixer Car tridge to higher than specified water pressures will void the
manufacturers warranty.
VBM Basin mixer
VEBM Extended basin mixer 90mm outlet
VEBM120 Extended basin mixer 120mm outlet
VMBM Medium basin mixer 90mm outlet
VMBM120 Medium basin mixer 120mm
VBMSS Basin mixer 316 S/S
Basin mixer
sussextaps.com.au
Tapware is to be installed by a Licensed Plumber in accordance with AS/NZS 3500:2003
Recommended working water pressure 300-500 kpa. Maximum water temperature is 65 deg.c
Copyright © Sussex Taps.


Produkt Specifikationer

Mærke: Sussex
Kategori: Kran
Model: VEBM120

Har du brug for hjælp?

Hvis du har brug for hjælp til Sussex VEBM120 stil et spørgsmål nedenfor, og andre brugere vil svare dig




Kran Sussex Manualer

Sussex

Sussex VEBM120 Manual

31 August 2024
Sussex

Sussex BWBMS210RH Manual

31 August 2024
Sussex

Sussex RWBHS200RH Manual

31 August 2024
Sussex

Sussex RBS Manual

31 August 2024
Sussex

Sussex BLWBMS210RH Manual

31 August 2024
Sussex

Sussex DPWBMS200 Manual

31 August 2024
Sussex

Sussex DBSHMSH Manual

31 August 2024
Sussex

Sussex BLBM Manual

31 August 2024
Sussex

Sussex CWBMS200RH Manual

31 August 2024
Sussex

Sussex DBSHS Manual

31 August 2024

Kran Manualer

Nyeste Kran Manualer

ProFlo

ProFlo PFX3085 Manual

12 December 2024
Rohl

Rohl R7903SLM Manual

11 December 2024
Rohl

Rohl LS59L-2 Manual

11 December 2024
ProFlo

ProFlo PFWSC4746SCP Manual

11 December 2024
ProFlo

ProFlo PFWSC4744SCP Manual

11 December 2024
ProFlo

ProFlo PFWSC4744BN Manual

11 December 2024