Sussex RWBHS200RH Manual
Læs nedenfor 📖 manual på dansk for Sussex RWBHS200RH (1 sider) i kategorien Kran. Denne guide var nyttig for 10 personer og blev bedømt med 4.5 stjerner i gennemsnit af 2 brugere
Side 1/1
Tapware is to be installed by a Licensed Plumber in accordance with AS/NZS 3500:2003
Recommended working water pressure 300-500 kpa. Maximum water temperature is 65 deg.c
Copyright © Sussex Taps.
Pipe Connections
1/2" BSP
HOT
IN
OUTLET
1/2" BSP
COLD
IN
1A
NOGGING
WALL
STUD
28-32
Wall Covering
25mm
"ROUGH-IN" View from above
90
OUTLET
IN-WALL BODY
MASTERFIT
THIS
SIDE
UP AS/NZS 3718:2005
LIC. 20081
1
LOCKING
SLEEVE
HANDLE
DRESS
RING
5.5
Licence No. 0124
In ac cord anc e with AS/NZS 6400
Sussex Taps Pty Ltd
WATER RATING
www.waterr ating.g ov.au
The mo re
stars the mo re
water efcient
Product code
Circa
Wall basin hostess system
Fitting off
Pipe connections
Rough in plumbing (MASTERFIT) mounting guide
- The Masterfit will be supplied with the Spindles pre-installed.
- Prepare a nogging and secure 28-32mm back from the front Using the screws (x4) of the stud (See Fig.1)
- The Masterfit (in-wall) will be marked “This side Up” to Ensure the Masterfit is indicate orientation.
- Using the screws (x4) provided, mount the Masterfit (in-wall) to the Nogging.
- Ensure the Masterfit is level and square to the Wall Studs.
- Seal the wall around the Locking Sleeve and immediately fit the Dress Ring.
- Fit the Handle Body, the Handle Body must be fully engaged onto the Spindle; note the Set Screw contact point.
(See Fig.1B)
- Secure the Handle body by tightening the Set screw using the 2mm Allen key provided. (Tighten well)
- After completing the installation, establish water supply, check function of Tapware and ensure no water leaks.
- The Masterfit is supplied with coloured thread Caps to protect and identify the Hot and Cold inlet connections.
- All lines must be free from any dirt and debris before connecting to the Masterfit. Flush all water feed lines.
- Connect Hot and Cold lines to the corresponding 1/2” BSP ports of the Masterfit. (See Fig.1A)
- Do not remove or disturb any factory fitted Pressure Plugs or Fixings.
- Once all water connections are made, use the “Spindle Handle Adapter” and check Hot/Cold water operation.
- Check all fittings and connections for leaks.
- Store the Dress Kit in a safe place until required for Fit off.
RWBHS150RH Wall basin hostess syst 150mm
RWBHS200RH Wall basin hostess syst 200mm
RWBHS250RH Wall basin hostess syst 250mm
RWBHS150RH-V Wall basin hostess syst 150mm - Vertex
RWBHS200RH-V Wall basin hostess syst 200mm - Vertex
RWBHS250RH-V Wall basin hostess syst 250mm - Vertex
sussextaps.com.au
Produkt Specifikationer
| Mærke: | Sussex |
| Kategori: | Kran |
| Model: | RWBHS200RH |
Har du brug for hjælp?
Hvis du har brug for hjælp til Sussex RWBHS200RH stil et spørgsmål nedenfor, og andre brugere vil svare dig
Kran Sussex Manualer
31 August 2024
31 August 2024
31 August 2024
31 August 2024
31 August 2024
31 August 2024
31 August 2024
31 August 2024
31 August 2024
31 August 2024
Kran Manualer
- Kran Ikea
- Kran Teka
- Kran Ernesto
- Kran Hansgrohe
- Kran Livarno
- Kran Smeg
- Kran Miomare
- Kran Caple
- Kran Schütte
- Kran Franke
- Kran Brita
- Kran Nodor
- Kran Oras
- Kran Grohe
- Kran CDA
- Kran Lynx
- Kran Stiebel Eltron
- Kran Berg
- Kran Lamona
- Kran Livarno Lux
- Kran Oliveri
- Kran Delta
- Kran BLANCO
- Kran Elkay
- Kran Quooker
- Kran Omnires
- Kran ZLine
- Kran Empire
- Kran Moen
- Kran Aloni
- Kran WillieJan
- Kran Everpure
- Kran Sani-Lav
- Kran Zip
- Kran Mizzo
- Kran Brauer
- Kran Fala
- Kran Neo
- Kran Lomazoo
- Kran American Standard
- Kran Billi
- Kran SaniSupreme
- Kran Deante
- Kran Vola
- Kran The Galley
- Kran Viidako
- Kran Curaqua
- Kran Waltec
- Kran Fantini
- Kran Rogerseller
- Kran Axor
- Kran Gessi
- Kran Graff
- Kran ProFlo
- Kran Rohl
Nyeste Kran Manualer
16 December 2024
12 December 2024
12 December 2024
12 December 2024
12 December 2024
11 December 2024
11 December 2024
11 December 2024
11 December 2024
11 December 2024