Vemer Tuo Wi-Fi Lite Manual

Vemer Termostat Tuo Wi-Fi Lite

Læs nedenfor 📖 manual på dansk for Vemer Tuo Wi-Fi Lite (2 sider) i kategorien Termostat. Denne guide var nyttig for 48 personer og blev bedømt med 4.5 stjerner i gennemsnit af 2 brugere

Download PDF

Side 1/2

16INITIAL CONFIGURATIONUser Manual

WALL-MOUNTING WI-FI CHRONOTHERMOSTAT

 Read all instructions carefully

DIMENSIONS

CONNECTION DIAGRAM

DEVICE DESCRIPTION

 Clock

 Day of the week

 Off operation

 Active load (conditioning mode)

 Active load (heating mode)

 Measured temperature

 Running daily program divided into 24 histograms,

one for each hour of the day. Each hour is associated with one of the 3 temperatures:

Temperature Temperature Temperature T1 T2 T3

 Active timed operation

 Synchronization with settings on the Vemer Cloud in progress

 Connection to the active Wi-Fi network

 Conﬁguration menu:

RF (not used)

advanced parameters of the deviceADV

TIMER timings

SET automatic operating temperatures T1, T2, T3

automatic operating programsPROG

CLOCK date and time

 Local active operation. In this state the device is disconnected from the Cloud Vemer

and any change in operation must be made using the keys on the chronothermostat.

Local operation can be disabled by the app

 Active keypad lock

1 2 3

click

130

Connection diagram

for the supply of

circulation pumps,

solenoid valves,

etc. at 230V ~

Connection diagram

for the control of the

boiler, heat pumps, etc.

“Programs List” page

From the screen “Programs list” it’s possible:

Vemer S.p.A.

I - 32032 Feltre (BL) • Via Camp Lonc, 16

e-mail: info@vemer.it - web site: www.vemer.it

MKIS01027-010-092020-EN Mod. TUO Wi-Fi Lite

Wi-Fi wall-mounting chronothermostat powered by mains (230 V~), suitable for the control

of heating and air-conditioning systems. The integrated Wi-Fi module allows the remote control

of the device via your smartphone or tablet. It’s necessary to connect the device to the home

router and then install the appropriate app on your smartphone or tablet available free for iOS

and Android devices.

Code Model Description

VE785700 Tuo Wi-Fi Lite Weekly chronothermostat white colour

SAFETY WARNINGS

During installation and operation of the device, it is necessary to comply with the following

instructions:

1) The device must be installed by a skilled person, in strict compliance with the connection

diagrams.

2) Do not power on or connect the device if any part of it is damaged.

3) After installation, inaccessibility to the connection terminals without appropriate tools must be

guaranteed

4) The device must be installed and activated in compliance with current electric systems

standards.

5) Before accessing the connection terminals, verify that the leads are not live.

6) In the electrical system of the building where the device must be installed, a protection device

from the overcurrents must be present.

7) The device performs actions of 1B type and is suitable for environments with pollution degree

2 and overvoltage category III (EN 60730-1).

TECHNICAL CHARACTERISTICS

• Power supply: 230V AC ± 10% 50/60 Hz

• Output: bistable relay with changeover contact 5A / 250V AC

• Weekly programming with 3 settable temperatures: T1, T2, T3

• Daily resolution: 1h

• Switch-on delay set between 15, 30 or 45 minutes (independent for each hour)

• Measured temperature scale: 0°C ÷ + 50°C

• Measured and displayed temperature resolution: 0.1°C

• Temperature regulation range: 2.0°C ÷ + 50°C

• Measurement update: every 20 seconds

• Measurement accuracy: ± 0.5 ° C

• Temperature regulation:

– on/off with adjustable differential between 0.1°C and 1°C

– proportional with settable band and regulation period

• Operating mode: heating (winter) or conditioning (summer)

• Display with blue backlighting

• Automatic winter time/summer time

• Keypad lock with password for installation in public places

• Wall installation (or covering the box 503)

• Terminal block for cables with section of 1.5 mm

• Operating frequency band: 2.4 GHz IEEE 802.11 b/g/n

• Maximum power of transmitted radiofrequency: 18.3 dBm

• Operating temperature: 0°C ÷ +50°C

• Operating humidity: 20% ÷ 90% non condensing

• Storage temperature: -20°C ÷ +65°C

• Degree of protection: IP: XXD

INSTALLATION AND INITIAL CONFIGURATION

The device can be installed on the wall or to cover the 3-module flush-mounting box (type 503).

We recommend positioning at a height of 1.5 meters from the floor, in an area that respects as

much as possible the average temperature conditions of the entire environment. Make sure that the

distance between the router and the device is such as to guarantee stable communication.

Avoid installation near doors or windows, in niches, behind doors and curtains or in positions with

excess or total lack of ventilation, to avoid that the reading of the temperature measured by the probe

is in some way offset.

1) Install and connect the device according to the connection diagrams shown in this manual

2) Install and start the “Clima Wi-Fi Vemer” app on your smartphone (or tablet). Create a Vemer account with which to associate the device Tuo Wi-Fi (If you already have a Vemer account, go to step 3).

a. Choose “Register” and fill in the “e-mail” and “password” fields and confirm by choosing “Register”.

For security reasons it is recommended to choose a password different from the one used to access your e-mail box

b. Check your e-mail box: confirm the activation of the account by clicking on the link contained in the e-mail sent by the system

3) Enter the e-mail address and password of your Vemer account

4) Add Tuo Wi-Fi to your Vemer account

• On the app... Choose “New Thermostat” and follow the guided procedure.

• On Tuo Wi-Fi.... . Hold down the keys and simultaneously until the display shows &RQIQ (7

• On the app... Choose the wi-fi network highlighted in green with the name “ ...” On the next screen select the home wi-fi network to connect Tuo Wi-Fi.iwm

Enter a name that identifies Tuo Wi-Fi, the pin (4 digits shown on the display of Tuo Wi-Fi) and choose an icon that helps identify the device among those proposed. Confirm with “Save”.

The configuration procedure is finished. At this point:

• the app displays the list of devices associated with your account among which also the newly associated device must appear.

• Tuo Wi-Fi displays the main screen. Check that the icon is fixed and that the time shown at the top left is correct.

APP DESCRIPTION

Page “Devices list”

From this screen it’s possible to choose which device to control. The type of chronothermostat can be

recognized by the name shown on the icon.

allows you to record a new device

allows you to group several devices.

For example it’s possible to group all “Tuo Wi-Fi” in a building of 3 ﬂoors

according to the logic: “Floor 1”, “Floor 2” and “Floor 3”.

Main Page

This screen shows the status of “ Tuo Wi-Fi”:

Measured temperature (22.0°C)

Operating mode (HEATING)

System status:

( ) red = on

( ) grey = off

Set temperature and running program name.

Touch this area to change the running program.

Operating mode

Touch this area to change the operating mode

(heating/cooling) and mode (automatic/manual/off).

to create a new program

to select, to modify, to delete or to rename an existing program

Note: the padlock to the left of the name INVERNO DEFAULT

indicates that the program can not be modiﬁed or canceled.

Modify a program

To modify an existing program, select the

proﬁle program of the day to be modiﬁed.

On the screen that opens, assign at any time

of day one of the temperature among T1,

T2 and T3 (marked by blue, green and red

colours). Created a program for a day, it’s

possible to copy it to any other day of the

week (“Copy” function).

Note: the image refers to the version of the

app for smartphone.

On the tablet the whole weekly programming

is visible on a single screen.

HOW TO DO IN CASE OF REPLACEMENT OF THE ROUTER

In case of replacement of the router of the home network, it is necessary

to connect the device to the new wi-ﬁ network. Proceed as follows:

1. On Tuo Wi-Fi:

a. Hold down the keys and simultaneously until the display shows “&21)1(7”

2. On the app:

b. Choose “Add Thermostat” Tuo £ £ “Next”

c. Choose the Wi-Fi network highlighted in green with the name “ .”iwm..

d. In the next screen select the new Wi-Fi network and enter the password

e. Exit the app the name and PIN serial numberwithout entering

HOW TO REMOVE THE DEVICE FROM YOUR ACCOUNT

Sometimes it may be necessary to delete a device from a personal account to move it to another

account, for example because the device is installed in a rented home and tenants change. Proceed

as follows:

1. On the app of the previous tenant:

a. Access the “Devices list” page

b. Hold the device to be deleted for a long time until the request to confirm deletion appears

c. After confirming the deletion, the icon starts to flash

2. On the app of the new tenant:

- If you already have a personal Vemer account:

d. Choose “Add Thermostat” Tuo “Already conﬁgured”£ £

e. Enter the name, the pin (to know how to view the PIN),

see ADV menu WI-FI connection conﬁguration)£

and an icon to help identify the device. Choose “Save”

- If you do not have a personal Vemer account yet:

d. Follow the “Device conﬁguration” procedure described in this manual.

Tuo Wi-Fi Lite setting

From this screen it’s possible to modify:

The advanced settings:

• temperature alarm conﬁguration

• e-mail of the recipient of the alarm

• regulation type

• The name of “Tuo Wi-Fi”

• The icon that identifies it

• The temperature values T1, T2 and T3

Advanced settings

From this screen you can:

• enter the email of the user who will receive the alarm signals

• set the temperature thresholds and the time (delay) necessary to

trigger the alarm

• choose the screen to choose the regulation type of temperature

(on/off or proportional)

• access the screen for blocking local operation.

When local operation is locked, any setting made with

Tuo Wi-Fi keypad will be ignored.

This function is useful if you want to have control

of the device only using the app and prevent changes

in settings from the keypad of Tuo Wi-Fi.

Produkt Specifikationer

Mærke:	Vemer
Kategori:	Termostat
Model:	Tuo Wi-Fi Lite

Har du brug for hjælp?

Hvis du har brug for hjælp til Vemer Tuo Wi-Fi Lite stil et spørgsmål nedenfor, og andre brugere vil svare dig

Dit navn*

Din email*

Skriv dit spørgsmål her

Termostat Vemer Manualer

Vemer ThermoPro Wi-Fi Manual

6 November 2024

Vemer Iride 230 Manual

31 August 2024

Vemer Chronos Key Manual

29 August 2024

Vemer Tuo Wi-Fi Manual

8 August 2024

Vemer ThermoPro Manual

8 August 2024

Vemer Asso Wi-Fi Manual

6 August 2024

Vemer Klima 2V Manual

31 Juli 2024

Vemer Klima LCD Manual

30 Juli 2024

Vemer Crono.X Manual

29 Juli 2024

Vemer Aros Manual

28 Juli 2024

Termostat Manualer

Nyeste Termostat Manualer

EQ-3 CC-RT-O-CnL-W-R5-2 Manual

16 December 2024

EQ-3 HmIP-WTH-2 Manual

16 December 2024

EQ-3 HMIP-WTH Manual

16 December 2024

EQ-3 HMIP-eTRV Manual

16 December 2024

EQ-3 HM-TC-IT-WM-W-EU Manual

16 December 2024

EQ-3 HM-CC-RT-DN Manual

16 December 2024

EQ-3 HMIP-BWTH Manual

16 December 2024

EQ-3 HMIP-BWTH24 Manual

16 December 2024

EQ-3 131651A0 Manual

16 December 2024

EQ-3 HmIP-eTRV-B Manual

16 December 2024