Cotech GS506G Manual

Cotech Røgalarm GS506G

Læs nedenfor 📖 manual på dansk for Cotech GS506G (6 sider) i kategorien Røgalarm. Denne guide var nyttig for 21 personer og blev bedømt med 4.5 stjerner i gennemsnit af 2 brugere

Download PDF

Side 1/6

GREAT BRITAIN • CUSTOMER SERVICE contact number: 020 8247 9300 e-mail: customerservice@clasohlson.co.uk internet: www.clasohlson.co.uk

500 mm

Ver. 20191227

Optical Smoke Alarm

Art.no 36-6213 Model GS506G

Please read theentire instruction manual before using theproduct and then

save it for future reference. Wereserve theright for any errors in text or images

and any necessary changes made to technicaldata. Ifyou have any questions

concerning technical problems please contact our Customer Services.

Fire safety

Preventative measures:

• Store any matches and lighters in alocked room out of children’sreach.

• Never empty theashes from ash trays, stoves and grills into waste bins

until theashes have completely cooled. Itis advisable to let them cool

overnight before disposing ofthem. Sootand ashes from stoves and

ﬁreplaces should be collected in metal buckets ﬁtted withlids. Always

place receptacles holding hot ashes on aﬁreproof surface.

• Never leave naked ﬂames such as candles unattended. Onlyuse non-

ﬂammable candle holders and candlesticks.

• Make sure that no sparks can escape from your wood-burning stove or

ﬁreplace and ensure that theﬁre has died before going tobed.

• Do not store or handle combustible liquids/substances close to sources

ofheat.

• Replace any faulty electrical plug or wiring. Makesure that thecorrect

type of fuses and circuit breakers are used in your consumerunit.

• Remember to switch off your TV, computer and other appliances using

thepower switch. Remote controls don’t switch appliances off completely.

• Do not place combustible materials and objects next to electrical heating

appliances. Avoidcontrolling electrical heaters with timers or any kind of

remote control device. Bearin mind that acombustible material might

have been placed on or next to anelectrical heating appliance while it

was switched off without your knowledge.

• It is important that chimneys and ﬂues are cleaned regularly to prevent

chimneyﬁres.

• Further information about ﬁre safety in thehome can be obtained from

theDepartment for Communities and Local Governmenthttps://www.

gov.uk/government/organisations/department-for-communities-

and-local-government if you should need tips and advice about how to

protect your home and family fromﬁre.

Fire safety checks:

• Check thecondition of your ﬁre extinguishers and make sure that

everyone in your household knows how to usethem.

• Draw up asafe plan of escape from your premises in case of emergency.

Makesure that there are alternative escape routes, such as windows. Make

sure that there is aladder or rope as analternative in case stairs are blocked.

• Practise your escape plan to make sure that itworks. Decide upon

anassembly point to gather in anemergency.

• Keep bedroom doors closed during thenight. Aclosed door can keep

theﬁre at bay long enough for you to make your escape through awindow.

If aﬁre breaksout:

• If aﬁre alarm goes off, keep calm but act quickly.

• Wake everyone up and make sure that they leave thebuilding according

to your escapeplan. Follow your escapeplan.

• Carefully feel doors with theback of your hand before opening them – if

they are hot, don’t openthem. Tryto ﬁnd analternative escaperoute.

Ifyou have to escape through smoke, crawl on your hands and knees

under thesmoke. Don’t waste time rescuing valuables.

• If possible, close doors and windows to contain theblaze.

• If theﬁre is small try to extinguish/contain it with awater hose, ﬁre

extinguisher or ﬁre blanket. Firstmake sure that you have ameans of

escape before tackling theﬁre. Getout as quickly as possible if you realise

that you can’t extinguish theﬁre.

• Call as soon as you are free of thebuilding, call from aneighbour’s 999

house if you don’t have aphone.

• Make sure that no-one re-enters thebuilding, wait for theﬁre brigade.

Positioning the smoke alarm

• Smoke alarms should be positioned in themiddle of theceiling of aroom

at thehighest point, or at thehighest point of thehallway, staircase or

landing. Smokeand fumes will rise, accumulate on theceiling and enter

thesmoke alarm from thetop.

• All bedrooms, corridors/escape routes should be equipped with smoke

alarms. Other rooms should also be equipped for comprehensive

protection.

• Corridors up to 3 m wide: The ﬁrst smoke alarm should be place at a max

distance of 7.5 m from the end of the corridor. The max distance between

two smoke alarms should be 15 m.

• Corridors less than 1 m wide: The ﬁrst smoke alarm should be placed at

a max distance of 7.5 m from the end of the corridor. The smoke alarm

should be mounted in the middle of the ceiling. In these cases, the rule of

keeping a 0.5 m distance to a wall cannot be met.

• Exterior corridors and similar: If the total length and width exceed 16 m²,

an extra smoke alarm should be mounted in the highest-lying area.

Installation

1. Remove thebaseplate by turning it anti-

clockwise.

2. Markout theposition of themounting holes

on thewall using thebaseplate as atemplate.

Screwthebaseplate into place using

theincluded screws. Forconcrete ceilings it

might be necessary to drill Ø 5 mm holes and

insert theincluded wall plugs before screwing

on thealarm.

3. Insert thebattery and connect theterminals.

• Pushing in thetest button will test all theessential functions of thesmoke

alarm and check that thebatteryworks.

• Thetest button simulates smoke entering thesmoke alarm,i.e. thetest

button has thesame effect as realsmoke.

• It is crucial that thesmoke be tested regularly and often, at least once

amonth. Forexample in conjunction with house cleaning, or after along

holiday away fromhome.

• Thesmoke alarm will only alert you when thebattery islow. Ifthere is any

other technical fault with thesmoke alarm it will not alert you to thisfact.

Thetest button on theother hand tests thebattery and all theessential

functions.

• The smoke alarm must be replaced if it does not emit 3 short audible

signals when the test button is pressed in for 5 sec.

Warning: Donot test thealarm close to naked ﬂames, these can damaged

thealarm and are dangerous. Wedo not recommend that you test thealarm

using smoke as results can be misleading if thecorrect test equipment is

notused.

The smoke alarm shall be replaced after 10 years

Smoke alarms shall be replaced after 10 years of service. Theexpiry date

should be printed on theratinglabel.

Care and maintenance

• Asmoke alarm which is dirty on theinside is more sensitive and often

goes off without reason.

• Theoutside of thesmoke alarm should be wiped clean with adamp cloth

and vacuumed carefully with asoft brush nozzle.

• Clean the smoke alarm by vacuuming it at least once a year. Test the

smoke alarm according to the instructions in the owner’s manual. Check

that all the inlets are unblocked and that the smoke alarm is not damaged

in any way. A damaged smoke alarm must be replaced.

Responsible disposal

This symbol indicates that this product should not be disposed of with

general householdwaste. Thisapplies throughout theentire EU. Inorder

to prevent any harm to theenvironment or health hazards caused

by incorrect waste disposal, theproduct must be handed in for

recycling so that thematerial can be disposed of in aresponsible

manner. Whenrecycling your product, take it to your local collection

facility or contact theplace of purchase. Theywill ensure that

theproduct is disposed of in anenvironmentally soundmanner.

Specifications

Power supply 9 V Alkaline battery* (lifespan 1 year)

Currentdraw Standby <10 µA, alarm <30 mA

Loudness >85 dB at adistance of 3 m

Maximum humidity 90 % RH

Temperaturerange 0–45 °C

Alarm sensitivity 0.10–0.16 dB/m

Servicelife Thesmoke alarm shall be replaced after 10years.

Theexpiry date should be printed on theratinglabel.

* Replace using the following batteries only: Zinc-carbon: Gold Peak 1604S (1-year

estimated lifetime). Alkaline: Gold Peak 1604A, Raymax 6LR61, Duracell MN1604

(5-year estimated lifetime). Lithium: EVE CR9-V (10-year estimated lifetime). (Using

unsuitable battery types and incorrect battery insertion pose an explosion risk. Only use

a battery of the same or equivalent type when replacing.)

• Place at least 0.5 m from

a wall or other obstacle. If

partition walls, furniture or

similar objects reach up to

ceiling level, then each of

these divided areas must

have their own separate

smoke alarm.

• Sloped ceiling placement, 50–

100cm from thepeak.

• Several smoke alarms must be

mounted at various heights for

ceilings exceeding 6 m in height.

• If ceiling beams or similar protrude

more than 0.2 m from the ceiling

and the area between the beams

is greater than 36 m², then the

smoke alarm should be mounted

in this area between the beams. If

beams protrude less than 0.2 m,

then the smoke alarm can either

be mounted on the ceiling or the

beam itself.

Thegrey zone is deadair. Donot

install thesmoke alarm in thisarea.

Do NOT place thesmoke alarm in thefollowing places:

• Do not place thesmoke alarm in thekitchen, where theventilation ispoor.

Smokeand vapours from cooking and baking could set thealarmoff.

• Do not place thesmoke alarm close to extractor fans or airvents.

Smokecan be drawn to these places instead of to thesmokealarm.

• Do not place asmoke alarm in agarage. Fumesfrom thecar exhaust

could set thealarmoff.

• Do not place thesmoke alarm in areas with high humidity or areas that

experience large changes in temperature. Thesmoke alarm should not be

placed in areas with temperatures below +5 °C or above +40 °C.

• Thesmoke alarm must not be paintedover.Note:

4. Twistthesmoke alarm back onto thebaseplate.

5. Holdin thetest button to test thesmokealarm. Referto thesection

Testing thesmokealarm.

Changing the battery

The included battery has an approximate 1-year lifespan. Roughly amonth

before thebattery dies, thealarm will emit short audible signals and thered

LED will ﬂash approximately every 30 seconds. Should this occur, it is time to

change thebattery.

1. Remove thealarm from thebaseplate by turning it clockwise.

2. Remove theold battery and connect theterminal leads to thenew battery*.

3. Insert thenew battery into thebattery holder.

4. Holdin thetest button for at least 5 seconds to make sure that thesmoke

alarmworks. Referto thesection Testing thesmoke alarm.

Safety information

• If thebedrooms are located in different parts of thehouse, asmoke alarm

should be placed in each bedroom.

• If thehouse has several ﬂoors, asmoke alarm should be placed on

everyﬂoor.

• Thesooner your family is warned of aﬁre, themore chance you have of

saving yourselves and your property.

• Smoke alarms should be positioned in themiddle of theceiling of aroom

at thehighest point, or at thehighest point of thehallway, staircase or landing.

• Themore smoke alarms you have – thesafer you’llbe. Makesure that

you can hear thesmoke alarms from your bedroom.

• Smoke alarms should normally not be more than 10–12 mapart.

Themaximum ﬂoor space area that one smoke alarm can protect is 60 m².

• Don’t put alarms in or near kitchens or garages where smoke or exhaust

fumes can set them off by accident. Neither is it advisable to ﬁt smoke

alarms in humid rooms or close tofans. Notin agricultural buildings either.

• Themajority of household ﬁres start in thekitchen. Asmoke alarm should

therefore be placed in theroom next to thekitchen to provide as early as

warning as possible.

• Factors which can increase theneed for having asmoke alarmare:

Closed doors, different ceiling heights, long distances or other obstacles

that might prevent or delay smoke from reaching thesmokealarm.

• The smoke alarm must be mounted in a safe manner to ensure that it

does not fall and cause injury to someone. It may be difﬁcult to mount

the smoke alarm to plasterboard ceilings or similar types of ceilings.

• The battery must not be subjected to ﬁre, direct sunlight or high

temperatures

• Thesmoke alarm must not be paintedover.Note:

Testing the smoke alarm

Test thesmoke alarm as follows: Pressand hold in thetest button for at

least 5 seconds. Thealarm will emit 3 short beeps followed by apause

of 1.5seconds in acontinuous cycle for as long as thebutton is heldin.

Thered LED will ﬂash acouple of times aminute.

For declaration of performance

visit www.clasohlson.com

• Horizontal/slanted ceilings: Smoke alarms should be placed at least 0.5

and a maximum of 1 m away from the ceiling’s highest point on ceilings

which have a horizontal portion and a slanted portion with a slant of over

20º. The smoke alarm should be mounted on the slanted portion of the

ceiling if the horizontal portion is less than 1 m wide. The smoke alarm

should be mounted in the middle of the horizontal portion if this portion is

more than 1 m wide.

Produkt Specifikationer

Mærke:	Cotech
Kategori:	Røgalarm
Model:	GS506G

Har du brug for hjælp?

Hvis du har brug for hjælp til Cotech GS506G stil et spørgsmål nedenfor, og andre brugere vil svare dig

Dit navn*

Din email*

Skriv dit spørgsmål her

Røgalarm Cotech Manualer

Cotech GS506G Manual

15 Maj 2024

Cotech GS558F Manual

2 Februar 2024

Røgalarm Manualer

Nyeste Røgalarm Manualer

Kidde P9040 Manual

26 September 2024

Schneider Esmi Sense FDP Manual

17 September 2024

Frient Intelligent Smoke Alarm Manual

27 August 2024

Frient Intelligent Heat Alarm Manual

27 August 2024

STI -6404 Manual

21 August 2024

STI Exit Stopper Manual

21 August 2024

Esylux PROTECTOR K 230 V Manual

26 Juli 2024

Esylux PROTECTOR K 9 V Lithium Manual

26 Juli 2024

Heatit Z-Smoke Manual

24 Juli 2024

Sygonix SY-5040172 Manual

14 Juli 2024