ESQ Quest Retrograde Manual

ESQ Ur Quest Retrograde

Læs nedenfor 📖 manual på dansk for ESQ Quest Retrograde (3 sider) i kategorien Ur. Denne guide var nyttig for 5 personer og blev bedømt med 4.5 stjerner i gennemsnit af 2 brugere

Download PDF
Side 1/3
RETROGRADE DAY MODELS
Includes Quest 3-hand Retrograde Weekday models with Big Date
Legend
H - Hour hand
M - Minute hand
S - Seconds hand
W - Retrograde weekday indicator
D - Big Date display
Crown positions:
Position 1: Normal function. Crown pushed against case. (Watch runs)
Position 2: Position for Quick Change of Big Date. Rotate crown
counterclockwise. (Watch continues to run)
Position 3: Time/Weekday setting. (Watch stops)
These 3-hand quartz models feature a pie-shaped Retrograde Weekday
indicator, and a Big Date display (an oversized date window with two
single-digit disks that rotate independently of one another) with direct
advance from 31 to 01.
TIME/DATE SETTING
To set the Time:
1. Pull crown out to position 3; watch stops.
2. Turn crown in either direction until hands indicate desired time.
3. Push crown back in to position 1; watch restarts.
To correct the Retrograde Weekday Setting:
1. Pull crown out to position 3; watch stops.
2. Turn crown clockwise, advancing hands past midnight one or more
times, until retrograde hand W indicates correct day of week.
NOTE: Big Date display D will advance by one each time the
hands pass midnight.
3. Push crown back in to position 1; watch restarts.
To set the Big Date (Quick Change Mode):
1. Pull crown out to position 2; watch continues to run.
2. Turn crown counterclockwise to advance date in Big Date display D.
3. When desired date is displayed in D, push crown back in to position 1.
NOTES: If you turn the crown too rapidly during Date Setting in Quick
Change Mode, you may inadvertently advance past desired date. If this
happens, continue to turn crown counterclockwise, advancing through
dates past 31 to 01, then on to correct date.
Each day during the calendar “jump phase” – the hours between 10:00
pm and 12:00 midnight – the Big Date will advance automatically. It may
be adjusted manually during these hours; however it must be set to the
following day: the date will not automatically change at midnight if it has
been manually adjusted during the jump phase.

Produkt Specifikationer

Mærke: ESQ
Kategori: Ur
Model: Quest Retrograde

Har du brug for hjælp?

Hvis du har brug for hjælp til ESQ Quest Retrograde stil et spørgsmål nedenfor, og andre brugere vil svare dig


Ur ESQ Manualer

ESQ

ESQ Pipeline with Tide Movement Manual

16 August 2024
ESQ

ESQ Beacon Chronograph Manual

12 August 2024
ESQ

ESQ Aston Chronograph Manual

11 August 2024
ESQ

ESQ Quest Retrograde Manual

11 August 2024
ESQ

ESQ Analog - Digital Chronograph Manual

10 August 2024
ESQ

ESQ Analog Chronograph with Alarm Manual

10 August 2024

Ur Manualer

Nyeste Ur Manualer

Diesel

Diesel Rasp Nsbb DZ1872 Manual

15 December 2024
Fossil

Fossil Collider Hybrid HR FTW7009 Manual

15 December 2024
Fossil

Fossil Neutra Hybrid HR FTW7027 Manual

15 December 2024
Fossil

Fossil Neutra Hybrid HR FTW7025 Manual

15 December 2024
Fossil

Fossil Monroe Hybrid HR FTW7035 Manual

15 December 2024
Fossil

Fossil Collider Hybrid HR FTW7008 Manual

15 December 2024
Fossil

Fossil Monroe Hybrid HR FTW7039 Manual

15 December 2024
Ice Watch

Ice Watch Ola Kids Manual

15 December 2024
TFA

TFA 60.4512.01 Manual

14 December 2024
Oregon Scientific

Oregon Scientific PrysmaChrome BAR292A Manual

14 December 2024