Mikrotik hAP ax lite LTE6 Manual

Mikrotik Router hAP ax lite LTE6

Læs nedenfor 📖 manual på dansk for Mikrotik hAP ax lite LTE6 (3 sider) i kategorien Router. Denne guide var nyttig for 10 personer og blev bedømt med 4.5 stjerner i gennemsnit af 2 brugere

Download PDF

Side 1/3

hAP ax lite LTE6

hAP ax lite LTE6hAP ax lite LTE6

hAP ax lite LTE6, L41G-2axD&FG621-EA

Safety Warnings

Before you work on any MikroTik equipment, be aware of the hazards involved with electrical circuitry, and be familiar with standard practices for

preventing accidents. The installer should be familiar with network structures, terms, and concepts.

Use only the power supply and accessories approved by the manufacturer, which can be found in the original packaging of this product.

This equipment is to be installed by trained and qualified personnel, as per these installation instructions. The installer is responsible for making sure, that

the Installation of the equipment is compliant with local and national electrical codes. Do not attempt to disassemble, repair, or modify the device.

This product is intended to be installed indoors. Keep this product away from water, fire, humidity, or hot environments.

We cannot guarantee that no accidents or damage will occur due to the improper use of the device. Please use this product with care and operate at your

own risk!

In the case of device failure, please disconnect it from power. The fastest way to do so is by unplugging the power adapter from the power outlet.

The adapter shall be installed near the equipment and shall be easily accessible.

Exposure to Radio Frequency Radiation:

Exposure to Radio Frequency Radiation: Exposure to Radio Frequency Radiation: This MikroTik equipment complies with the European Union radiation exposure limits set forth for an uncontrolled

environment. This MikroTik device should be installed and operated no closer than 20 centimeters from your body, occupational user, or the general public.

Quickstart

Please follow these quick steps to set up your device:

Connect your computer to one of the Ethernet ports;

Configure your computer to obtain its IP address automatically through DHCP;

Insert a micro SIM card into the slot;