Shelly 2.5 Manual

Shelly Ikke kategoriseret 2.5

Læs nedenfor 📖 manual på dansk for Shelly 2.5 (2 sider) i kategorien Ikke kategoriseret. Denne guide var nyttig for 15 personer og blev bedømt med 4.5 stjerner i gennemsnit af 2 brugere

Download PDF

Side 1/2

USER GUIDE

WARRANTY & WARRANTY TERMS

2 Circuit WiFi Relay Switch

fig. 1

fig. 2

LEGEND:

N - Neutral input (110-230V AC);

Positive input (24-60V DC)

L - Line input (110-230V AC);

Negative input (24-60V DC)

O1 - Output 1;

O2 - Output 2;

SW1 - Switch 1 (input controlling O1);

SW2 - Switch 2 (input controlling O2).

Power supply:

110-230V ±10% 50/60Hz AC

24-60V DC

Max load per channel:

10A/230V, 50/60Hz

Complies with EU standards:

• RE Directive 2014/53/EU

• LVD 2014/35/EU

• EMC 2004/108/WE

• RoHS2 2011/65/UE

Working temperature:

– 40°C up to 40°C

Radio signal power:

1mW

Radio protocol:

WiFi 802.11 b/g/n

Frequency:

2400 – 2500 MHz;

Operational range (depending on local construction):

• up to 50 m outdoors

• up to 30 m indoors

Dimensions (HxWxL):

39 x 36 x 17 mm

Electrical consumption:

< 1 W

The Shelly® Dual WiFi Relay Switch by Allterco Robotics is

intended to be mounted into a standard in-wall console, be-

hind power sockets and light switches in order to control and

monitor the electric power through it, independent for each

channel. Shelly may work as a standalone Device or as an

accessory to a home automation controller.

Technical Information

• Control through WiFi from a mobile phone, PC, automation

system or any other Device supporting HTTP and/or UDP

protocol.

• Microprocessor management.

• Controlled elements: 2 electrical circuits/appliances.

• Controlling elements: 2 relays.

• Shelly may be controlled by an external button/switch.

CAUTION! Danger of electrocution. Mounting the

Device to the power grid has to be performed with

caution.

CAUTION! Do not allow children to play with the

button/switch connected the Device. Keep the De-

vices for remote control of Shelly (mobile phones,

tablets, PCs) away from children.

Introduction to Shelly®

Shelly® is a family of innovative Devices, which allow remote

control of electric appli-ances through mobile phone, PC or

home automation system. Shelly® uses WiFi to connect to

the devices controlling it. They can be in the same WiFi net-

work or they can use remote access (through the Internet).

Shelly® may work standalone, without being managed by a

home automation controller, in the local WiFi network, as well

as through a cloud service, from everywhere the User has

Internet access.

Shelly® has an integrated web server, through which the User

may adjust, control and monitor the Device. Shelly

® has two

WiFi modes - access Point (AP) and Client mode (CM). To

operate in Client Mode, a WiFi router must be located within

the range of the Device. Shelly

® devices can communicate

directly with other WiFi devices through HTTP protocol.

An API can be provided by the Manufacturer. Shelly

® devices

may be available for monitor and control even if the User is

outside the range of the local WiFi network, as long as the

WiFi router is connected to the Internet. The cloud function

could be used, which is activated through the web server of

the Device or through the settings in the Shelly Cloud mobile

application.

The User can register and access Shelly Cloud, using either

Android or iOS mobile applications, or any internet browser

and the web site: https://my.Shelly.cloud/.

Installation Instructions

CAUTION! Danger of electrocution. The mounting/

installation of the Device should be done by a qual-

ied person (electrician).

CAUTION! Danger of electrocution. Even when the

Device is turned off, it is possible to have voltage

across its clamps. Every change in the connection

of the clamps has to be done after ensuring all local power

is powered off/disconnected.

CAUTION! Do not connect the Device to appliances

exceeding the given max load!

CAUTION! Connect the Device only in the way

shown in these instructions. Any other method

could cause damage and/or injury.

CAUTION! Before beginning the installation please

read the accompanying documentation carefully

and completely. Failure to follow recommended

procedures could lead to malfunction, danger to your life or

violation of the law. Allterco Robotics is not responsible for

any loss or damage in case of incorrect installation or oper-

ation of this Device.

CAUTION! Use the Device only with power grid and

appliances which comply with all applicable regu-

lations. short circuit in the power grid or any appli-

ance connected to the Device may damage the Device.

RECOMMENDATION: Тhe Device may be connect-

ed to and may control electric circuits and appli-

ances only if they comply with the respective

standards and safety norms.

RECOMMENDATION: The Device may be connected

with solid single-core cables with increased heat re-

sistance to insulation not less than PVC T105°C.

Initial Inclusion

Before installing/mounting the Device ensure that the grid is

powered off (turned down breakers).

Connect the Relay to the power grid and install it in the con-

sole behind the switch/power socket following the scheme

that suites the desired purpose.

1. 1. Connecting to the power grid and to 2 separately con-

trolled devices (circuits) – g. 1

2. 2. Connecting to the power grid and to motor with 2 rotating

directions and 1 button for controlling the directions of rotation

( for electrical curtains, rollers, garage doors etc.) – g. 2.

CAUTION! The controlled bidirectional electric mo-

tor must have built-in or additionally tted restric-

tors (protectors), to turn the power off upon reaching the

end point or protection against gripping. The anti-grip func-

tion helps in case the garage door encounters an obstacle,

its’ movement stops and the reverse motion is triggered to

release the obstacle.

You may choose if you want to use Shelly with the Shelly

Cloud mobile application and Shelly Cloud service. You can

also familiarize yourself with the instructions for Manage-

ment and Control through the embedded Web interface.

Control your home with your voice

All Shelly devices are compatible with Amazon Echo and

Google Home.

Please see our step-by-step guide on:

https://shelly.cloud/compatibility/Alexa

https://shelly.cloud/compatibility/Assistant

MOBILE APPLICATION FOR

MANAGMENT OF SHELLY®

Shelly Cloud gives you opportunity to control and adjust all

Shelly® Devices from anywhere in the world.

You only need an internet connection and our mobile applica-

tion, installed on your smartphone or tablet.

To install the application please visit Google Play (Android - g.

3) or App Store (iOS - g. 4) and install the Shelly Cloud app.

fig. 3 fig. 4

Registration

The rst time you load the Shelly Cloud mobile app, you have to

create an account which can manage all your Shelly

® devices.

Forgotten Password

In case you forget or lose your password, just enter the e-mail

address you have used in your registration. You will then re-

ceive instructions to change your password.

WARNING! Be careful when you type your e-mail

address during the registration, as it will be used in

case you forget your password.

After registering, create your rst room (or rooms), where you

are going to add and use your Shelly devices.

Shelly Cloud gives you opportunity to create scenes for auto-

matic turning on or off of the Devices at predened hours or

based on other parameters like temperature, humidity, light

etc. (with available sensor in Shelly Cloud).

Shelly Cloud allows easy control and monitoring using a mo-

bile phone, tablet or PC.

Device Inclusion

To add a new Shelly device, install it to the power grid fol-

lowing the Installation Instructions included with the Device.

Step 1

After the installation of Shelly in the console behind the pow-

er socket/light switch and the power is turned on Shelly will

create its own WiFi Access Point (AP).

WARNING: In case the Device has not created its

own WiFi network with SSID like shelly-

switch25-35FA58 check if you have connected Shelly correct-

ly by the schemes described above. If you do not see an active

WiFi network with SSID like shellyswitch25-35FA58, reset the

Device. If the Device has been powered on, you have to restart

by powering it off and on again. After turning the power on,

you have one minute to press 5 consecutive times the button/

switch connected to either input (SW1/SW2). You have to

hear the Relay trigger itself. After the trigger sound, Shelly

should return to AP Mode. If you have physicall access to the

device, you can press and hold the Reset button for 10 sec-

ond, which is placed on the back of the device. Shelly should

return to AP Mode. If not, please repeat or contact our cus-

tomer support at: support@Shelly.cloud

Step 2

Choose “Add Device”.

In order to add more Devices later, use the app menu at the

top right corner of the main screen and click “Add Device”.

Type the name (SSID) and password for the WiFi network, to

which you want to add the Device.

Step 3

If using iOS: you will see the following screen:

Press the home button of your iPhone/iPad/iPod. Open

Settings > WiFi and connect to the WiFi network created by

Shelly, e.g. shellyswitch25-35FA58.

If using Android: your phone/tablet will automatically scan

and include all new Shelly Devices in the WiFi network that

you are connected to.

Upon successful Device Inclusion to the WiFi network you will

see the following pop-up:

Step 4:

Approximately 30 seconds after discovery of any new Devic-

es оn the local WiFi network, а list will be displayed by default

in the “Discovered Devices” room.

Step 5:

Enter Discovered Devices and choose the Device you want to

include in your account.

Step 6:

Enter a name for the Device (in the Device Name eld). Choose a

Room, in which the Device has to be positioned. You can choose

an icon or add a picture to make it easier to recognize. Press

“Save Device”.

Specification

110V-240V

NSW1O1LL02SW2

110-240V AC

NSW1O1LL02SW2

24-60V DC

NSW1O1LL02SW2

2.5

Produkt Specifikationer

Mærke:	Shelly
Kategori:	Ikke kategoriseret
Model:	2.5

Har du brug for hjælp?

Hvis du har brug for hjælp til Shelly 2.5 stil et spørgsmål nedenfor, og andre brugere vil svare dig

Dit navn*

Din email*

Skriv dit spørgsmål her

Ikke kategoriseret Shelly Manualer

Shelly 1 Manual

1 September 2024

Shelly Smoke Plus Manual

1 September 2024

Shelly BLU Motion Manual

1 September 2024

Shelly Plus 1PM Mini Manual

1 September 2024

1 September 2024

1 September 2024

1 September 2024

22 August 2024

11 August 2024

Shelly Smart WiFi Plug Manual

26 Juli 2024

Ikke kategoriseret Manualer

Nyeste Ikke kategoriseret Manualer

Kramer VP-8X8 Manual

25 November 2024

Kramer PT-2C Manual

25 November 2024

Lazer Bob+ Manual

25 November 2024

Dometic DPS 80 Manual

25 November 2024

Kramer 102MX Manual

25 November 2024

Kramer FC-18 Manual

25 November 2024

Kramer DSP-62-UC Manual

25 November 2024

Kramer KC-BRAINware-25 Manual

25 November 2024

Kramer KC-BRAINware-50 Manual

25 November 2024

Tiger SKF-H101 Manual

25 November 2024