Sony Wireless SingStar Microphones Manual

Sony Mikrofon Wireless SingStar Microphones

Læs nedenfor 📖 manual på dansk for Sony Wireless SingStar Microphones (2 sider) i kategorien Mikrofon. Denne guide var nyttig for 22 personer og blev bedømt med 4.5 stjerner i gennemsnit af 2 brugere

Download PDF

Side 1/2

WIRELESS SINGSTAR® MICROPHONES

INSTRUCTION MANUAL 7013539

Before using this product, carefully read this manual and retain it for future reference.

These Wireless SingStar® Microphones are designed for use with the

PlayStation®2 console and the PLAYSTATION 3 system.®

Product Contents

• Two Wireless SingStar Microphones®

• One USB receiver

• One USB Cable with a Mini-B connector

• Four AA alkaline batteries

Warning

To avoid potential electric shock or starting a re, do not expose this product to rain

or moisture.

Precautions

Safety

This product has been designed with the highest concern for safety. However,

any electrical device, if used improperly, has the potential for causing re, electric

shock or personal injury. To ensure accident-free operation, be sure to follow these

guidelines:

• Observe all warnings, precautions and instructions.

• Do not use the product if it functions in an abnormal manner.

• This product contains small parts, which, if removed, may be a choking hazard

to children.

Use and Handling

• Do not expose the product to high temperatures, high humidity or direct sunlight.

• Operate in an environment where temperatures range between 5°C and 35°C.

• Do not allow liquid or small particles to get into the product.

• Do not put heavy objects on the product.

• Never disassemble or modify the product.

• Do not throw or drop the product, or physically damage it in any way.

• Do not touch the product’s metal parts or insert foreign objects into its USB

connector.

Cleaning the Wireless SingStar Microphones®

Dust may build up on the product after an extended period of time.

• Before cleaning the product, disconnect it from the PlayStation®2 console or the

PLAYSTATION®3 system for safety.

• Wipe the product’s surface with a soft, dry cloth.

• The product should be cleaned by an adult, or cleaned under close adult

supervision.

• Do not use a moistened cloth to clean the product as water may cause it to

malfunction.

• Do not use benzene, paint thinner or other chemicals as these may damage the

product.

• When using a commercially available cleaning cloth, follow the instructions

supplied with it.

AA Alkaline Batteries

• Do not throw the batteries into re.

• Do not carry the batteries with coins or other metallic objects. The batteries

can generate heat if their positive and negative terminals come into accidental

contact with metallic objects.

• Do not mix new batteries with old ones.

• Do not use dierent types of battery together.

• When you are not going to use the product for a long time, remove the batteries

to avoid damage from battery leakage and corrosion.

• If battery leakage occurs, wipe o any deposit and install new batteries. If the

deposit sticks to you, wipe it o thoroughly.

Connecting the Wireless SingStar® Microphones

USB receiver

• Connect the USB receiver to the PlayStation®2 console or the PLAYSTATION®3

system using the USB Cable.

• Turn on the PlayStation®2 console or the PLAYSTATION 3 system.®

Wireless SingStar Microphones®

• Before using a Wireless SingStar® Microphone, carefully remove its battery

cover and insert two AA alkaline batteries (supplied). Ensure that the ribbon

inside the battery compartment lies beneath the batteries and that its loose

end projects from under them. This will make it easier to remove the batteries

when they run out.

• To turn a Wireless SingStar® Microphone on, push the POWER/LOCK switch

briey towards the POWER position.

• When a Wireless SingStar® Microphone is activated, its LED indicator will glow

red to indicate that it is connecting to a USB receiver.

• When a connection is achieved, the LED indicator on the Wireless SingStar ®

Microphone will glow green.

• To turn a Wireless SingStar® Microphone o, push the POWER/LOCK switch

towards the POWER position and hold it there briey before releasing it. The

Wireless SingStar® Microphone’s LED indicator will turn o.

NOTE: A Wireless SingStar Microphone will turn oﬀ automatically if left idle for ®

15 minutes.

• When using a Wireless SingStar Microphone, push the POWER/LOCK switch ®

into the LOCK position to make sure it does not turn o accidentally.

Pairing the Wireless SingStar® Microphones

Two wireless devices are said to be paired when they recognise each other and are

able to wirelessly connect to each other automatically. These Wireless SingStar ®

Microphones have already been paired with the supplied USB receiver. If a

replacement Wireless SingStar® Microphone is introduced, it must be paired with

the USB receiver.

• Ensure that the Wireless SingStar® Microphones are turned o before pairing

them.

• Push the POWER/LOCK switch on one of the Wireless SingStar® Microphones

into the POWER position and hold it for four seconds. The LED indicator will glow

green and then turn o. When the LED indicator turns o, release the POWER/

LOCK switch and the LED indicator will ash green to indicate that the Wireless

SingStar® Microphone is in pairing mode. Be sure to perform this operation

within two metres of the USB receiver.

• Press and hold the BIND button on the USB receiver for four seconds. When

its LED indicator glows green, release the BIND button and the LED indicator

will ash green to indicate that the USB receiver is pairing with the Wireless

SingStar® Microphone.

• When the Wireless SingStar ® Microphone has paired successfully with the USB

receiver, the LED indicators on both the Wireless SingStar® Microphone and the

USB receiver will glow green.

• Repeat the pairing process with the second Wireless SingStar ® Microphone.

• The USB receiver will pair with a maximum of two Wireless SingStar®

Microphones.

Using the Wireless SingStar® Microphones

During use, ensure that the Wireless SingStar® Microphones are within approximately

ve metres of the PlayStation®2 console or the PLAYSTATION 3 system. To ensure ®

the best connection between the Wireless SingStar® Microphones and the USB

receiver, do not cover the microphone antennas during use.

The usage and function of the product may vary depending on the software in use.

See the appropriate software manual for details.

LED indicator

POWER/LOCK switch

LED indicator battery cover

antenna

BIND button

USB connector

GB NOTE: When battery power is low, the LED indicator on the Wireless SingStar®

Microphone will dim.

Produkt Specifikationer

Mærke:	Sony
Kategori:	Mikrofon
Model:	Wireless SingStar Microphones
Type:	Mikrofon til spillekonsol
Tænd-/slukkontakt:	Ja
Produktfarve:	Sort
Forbindelsesteknologi:	Trådløs