Crestron PP-100-W Manual

Crestron Smart hjem PP-100-W

Læs nedenfor 📖 manual på dansk for Crestron PP-100-W (2 sider) i kategorien Smart hjem. Denne guide var nyttig for 13 personer og blev bedømt med 4.5 stjerner i gennemsnit af 2 brugere

Download PDF
Side 1/2
1
quickstart guide
www.crestron.com
Specifications subject to
change without notice.
QUICKSTART DOC. 7676B (2043124) 04.16
Crestron Home Beacon Setup App
CRESTRON-PINPOINT
1Introduction
The CRESTRON-PINPOINT app configures PP-100 PinPoint™
Proximity Detection Beacons for use with a Crestron® system.
Configuration includes pairing PinPoint beacons with rooms and
adjusting the beacons’ range for optimal room coverage. Once
configuration is complete, the app generates a configuration file that is
imported into the CRESTRON-APP and CRESTRON-APP-PAD Control
Apps for Apple® iOS® operating system on the device(s) that will be used
with the PinPoint beacons.
2Download the App
3Create a PinPoint System
Create a PinPoint System for a residence by specifying rooms and
pairing a beacon to each room.
Create a System
1. On the iOS device, tap to start the
app. The Residence List screen is
displayed.
NOTE: If prompted to use your
current location, tap .Yes
2. Tap New Residence. The Room List
screen is displayed.
3. Tap the field and enter Residence Name
the name of the residence where the
system is installed. This field is for user
reference only.
4. Tap the field and CS Friendly Name
enter the information found in the
field of the Friendly Name/Location
CRESTRON-APP or
CRESTRON-APP-PAD app.
Create Rooms
1. Tap New Room to create a room that is
to be configured for PinPoint use. Its
screen is displayed.Room Detail
2. Tap the field and enter the Room Name
name of the room that contains the
PinPoint beacon. Tap Done when
complete.
3. Tap and select the room number Not Set
from the list that matches the SIMPL
Windows program. A system can contain
up to 100 joins; each join connects
with a beacon.
4. Tap Back Room List . The screen is
displayed with the newly created room
entry and the status of its beacon
connection.
5. Repeat steps 1 through 4 for each room
that contains one or more PinPoint
beacons.
Pair Beacons with a Room
Once all of the rooms have been added to the PinPoint system, they are
ready to be paired with the beacons.
1. From the screen, tap a room you Room List
want to pair with a beacon to display its
Room Detail Room Detail screen. When the
screen is displayed, the app begins scanning
for beacons. Any beacon that is discovered
through Bluetooth or that is sending proximity
updates that are received by the app is listed
on the screen. Previously Room Detail
added beacons are also on the list but are
grayed out if they are not detected. Beacons
are displayed with one of the following icons.
● The white icon indicates that the beacon
is unplugged or out of range of the iOS
device.
● The red icon indicates that the iOS device
can see the beacon but is not in the beacon detection area.
● The green icon indicates that the iOS device is within the beacon
detection area.
indicates that the beacon is in Admin mode. When Admin ●
mode times out, the icon changes to a white, red, or green icon if
the beacon has already been paired with the room, or the icon
disappears from the list if it is already paired with another room.
● X indicates that the beacon is available for pairing with the
selected room.
● indicates that the beacon is already paired with the selected
room. If is displayed (Admin mode), tap the beacon to change
its properties. Refer to section ∫ for more information.
indicates that the beacon is already assigned to another room ●
and cannot be added to the current room.
indicates that a beacon has never been configured or has ●
been reset to the factory settings.
2. While in Bluetooth range of the beacon, plug the beacon into a wall
outlet. The beacon is displayed on the screen with Room Detail
either or shown as its status. Refer to the list of icon definitions in
step 1 for details.
NOTE: The beacon appears on the screen within 15 seconds.
NOTE: To avoid confusion, plug only one beacon in at a time.
NOTE: If the beacon is already plugged in, unplug it and plug it in
again to place it in Admin mode.
CRESTRON-PINPOINT
NOTE: This section provides instructions for downloading the app from
the App Store® online store that is available on an iOS device. The
application can also be downloaded from the App Store using iTunes ®
software on a computer. For detailed information, refer to
www.apple.com/support/itunes/store/apps.
Prerequisites
● Cellular data network (iPhone® and cellular-equipped devices only)
or Wi-Fi® network that is connected to the Internet (Refer to
support.apple.com/kb/TS1398 for Wi-Fi network information.)
● iTunes account (Refer to support.apple.com/kb/HT2731 for
information about setting up an account.)
● Bluetooth® communications enabled on the iOS device
Download the App from the App Store
1. On the iOS device’s home screen, tap the icon ( ). App Store
2. Search for the app:
a. Tap Search.
b. Tap the search field and enter the search term .Crestron
c. Tap Search. The Crestron apps are listed.
3. Tap the Crestron Home® Beacon Setup App and follow the prompts
to download it. The iOS device downloads the app. The app’s icon
( ) appears on the home screen and shows the status of the
download and installation.

Produkt Specifikationer

Mærke: Crestron
Kategori: Smart hjem
Model: PP-100-W

Har du brug for hjælp?

Hvis du har brug for hjælp til Crestron PP-100-W stil et spørgsmål nedenfor, og andre brugere vil svare dig


Smart hjem Crestron Manualer

Crestron

Crestron GLS-OIR-W-2500 Manual

21 August 2024
Crestron

Crestron GLS-ODT-W-1200 Manual

20 August 2024
Crestron

Crestron GLS-LCCT Manual

20 August 2024
Crestron

Crestron GLS-PART-CN Manual

20 August 2024
Crestron

Crestron GLS-OIR-C-CN Manual

20 August 2024
Crestron

Crestron PP-100-W Manual

19 August 2024

Smart hjem Manualer

Nyeste Smart hjem Manualer

EQ-3

EQ-3 AG HM-LGW-O-TW-W-EU-2 Manual

16 December 2024
Vimar

Vimar 20461.N Manual

15 December 2024
Vimar

Vimar 19537.M Manual

15 December 2024
Vimar

Vimar 14461.SL Manual

15 December 2024
Vimar

Vimar 14537 Manual

15 December 2024
Vimar

Vimar R21511.1.B Manual

15 December 2024
Vimar

Vimar R21511.1 Manual

15 December 2024
Vimar

Vimar 16849.B Manual

15 December 2024
Vimar

Vimar 19849 Manual

15 December 2024
Vimar

Vimar 20172.120.N Manual

15 December 2024