EnerGenie Mi Home Click Manual

EnerGenie Smart hjem Mi Home Click

Læs nedenfor 📖 manual på dansk for EnerGenie Mi Home Click (1 sider) i kategorien Smart hjem. Denne guide var nyttig for 5 personer og blev bedømt med 4.5 stjerner i gennemsnit af 2 brugere

Download PDF
Side 1/1
In the Box:
- MiHome Click
- Battery, Already Fitted (1x CR2450)
- Double Sided Fixing Pad
- User Guide
Available Functions
- Single Click
- Double Click
- Long Click
Connecting the Battery
Before the MiHome Click is used for the first time, remove
the battery cover (2) on the MiHome Click (if fitted) by
carefully sliding apart, and remove the plastic tab (6).
Pairing via a Browser
1. Log into your MiHome account at mihome4u.co.uk.
2. Select Pair New Device from the mihome4u.co.uk/devices
3. Select the Click, followed by Pair Device and then follow
the onscreen pairing instructions, pressing the pairing button
(3) for 5-6 seconds when required. The pairing LED which
can be seen through the pairing LED view slot (9) will flash
up to 5 times to indicate pairing mode.
4. Check the MiHome Click is now visible in the device list,
if not, repeat steps 2 and 3 as above.
Installation
1. Remove covering from one side of fixing pad, and fix into
square recess on rear of battery cover.
2. Mount the MiHome Click to desired location by removing
remaining covering from fixing pad and pressing into place.
Note: Before fixing into place, ensure that MiHome Click
communicates with the MiHome Gateway in the desired
position, and that the fixing location is clean and dry.
Mi Home Click
Quick Start Guide
The MiHome Click is part of the MiHome home
automation range. This allows you to set three user
defined configurable actions per MiHome Click device,
enabling you to control other compatible MiHome devices.
1 – MiHome Click 5 – Battery
2 – Battery cover 6 – Plastic tab
3 – Pairing button 7 – Locating tab
4 – Battery latch 8 – Pairing LED view
Pairing with the MiHome Gateway
Your MiHome Click needs to be paired with the MiHome
Gateway before it can be used. You must pair your
MiHome Click with the MiHome Gateway before installing
it. Please ensure that your device is in range of the Gateway
when you pair it. We suggest up to 10 metres, unobscured
by furniture or walls etc.
Safety
If you do not install and use in line with this guide the
warranty will become invalidated and we will not be liable
for any damage or loss whatsoever, including indirect loss,
damage to property or personal injury. You must only use
the product in dry areas indoors, and it must be protected
from moisture and water. Do not disassemble, other than
as described in the installation section of this user guide,
as it does not contain any parts to service. If it arrives faulty,
return it to where you bought it. Your statutory rights are not
aected
Copyright Notice
© 2017 Sandal Plc.
User Manual
Part no: MIHO089
Energenie and MiHome are brand names of Sandal Plc.
Oxon, OX26 6BW
Further Help
For more help, look online at
mihome4u.co.uk/troubleshooting and
www.energenie4u.co.uk where you can download a more
comprehensive user manual, or contact our helpful support
team in the UK via 08000 469 466 or
support@mihome4u.co.uk
Further contact methods can be found at:
https://energenie4u.co.uk/about_us/contact_us
SIMPLIFIED EU DECLARATION OF CONFORMITY
Hereby, Sandal Plc, T/a Energenie declares that the radio
equipment type MIHO089 MiHome Multi Sensor is in
compliance with Directive 2014/53/EU. The full text of the
EU declaration of conformity is available at the following
internet address: www.energenie4u.co.uk
Pairing via the App on your Smartphone
1. Log into your MiHome account on the MiHome App
(App available free on iOS or Google Play Store)
2. Select Add a new device from menu and choose Click.
3. Follow onscreen pairing instructions, pressing the
pairing button (3) for 5-6 seconds when required. The
pairing LED which can be seen through the pairing LED
view slot (9) will flash up to 5 times to indicate pairing mode.
4. Check the MiHome Click is now visible in the device list,
if not, repeat steps 2 and 3 as above.
1 2
3
4
56
7
8
WARNING: NOT
SUITABLE FOR
CHILDREN
UNDER 36
MONTHS

Produkt Specifikationer

Mærke: EnerGenie
Kategori: Smart hjem
Model: Mi Home Click

Har du brug for hjælp?

Hvis du har brug for hjælp til EnerGenie Mi Home Click stil et spørgsmål nedenfor, og andre brugere vil svare dig


Smart hjem EnerGenie Manualer

EnerGenie

EnerGenie Mi Home Click Manual

4 August 2024
EnerGenie

EnerGenie Mi Home Double Light Switch Manual

19 Juli 2024
EnerGenie

EnerGenie MIHO001 Manual

18 Oktober 2022

Smart hjem Manualer

Nyeste Smart hjem Manualer

Lorex

Lorex ACSOL3-E Manual

15 November 2024
Elro

Elro FZ5002611R Manual

4 November 2024
Qnect

Qnect QN-WP01 - 414000005 Manual

15 Oktober 2024
Qnect

Qnect QN-WP04 - 414000001 Manual

15 Oktober 2024
Elro

Elro AB600S-2 Manual

13 Oktober 2024
Tenda

Tenda SP15 Manual

9 Oktober 2024
Eufy

Eufy Lumi Plug-in Night Light Manual

6 Oktober 2024
Ikea

Ikea INSPELNING 205.698.40 Manual

5 Oktober 2024
ETiger

ETiger ES-D4A Manual

3 Oktober 2024
Alecto

Alecto EUP-90W Manual

2 Oktober 2024