Nitecore T20 Manual

Nitecore Lettelse T20

Læs nedenfor 📖 manual på dansk for Nitecore T20 (2 sider) i kategorien Lettelse. Denne guide var nyttig for 26 personer og blev bedømt med 4.5 stjerner i gennemsnit af 2 brugere

Download PDF

Side 1/2

T20 USER MANUAL

Features

• Utilizes a CREE XP-L2 V6 LED with a max output of 1,300 lumens

• Max peak beam intensity of 10,740cd and max throw of 207 meters

• Utilizes an OP reector for wide range ood output

• Highly efcient constant current circuit provides a stable output for up to 52

hours

• Dual tail switches enable intuitive operations for tactical applications

• STROBE READY™ Technology to enable a quick access to STROBE Mode

(Patent No.: ZL201320545349.4)

• The power indicator on the tail cap indicates the remaining battery power

(Patent No. ZL201220057767.4)

• Intelligent Li-ion battery charging circuit with a micro-USB port

• Electronic reverse polarity protection

• Strike bezel uses high strength silicon nitride ceramics to enable excellent

glass breaking performance

• Optical lenses with double-sided scratch resistant coating

• Constructed from aero grade aluminum alloy

• HA III military grade hard-anodized nish

• Waterproof and dustproof rating in accordance with IP68

(2 meters submersible)

• Impact resistant to 1 meter

Specications

Length: 155mm (6.1")

Head Diameter: 35mm (1.38")

Tail Diameter: 31mm (1.22")

Weight: 151.5g (5.34oz)

Battery Options

Type Nominal Voltage Compatibility

18650 Rechargeable Li-

ion Battery 18650 3.6V/3.7V Y (Recommended)

Primary Lithium Battery N (Incompatible)CR123 3V

Rechargeable Li-ion

Battery RCR123 3.6V/3.7V N (Incompatible)

Technical Data

FL1 STANDARD HIGH MID STROBELOW

1,300 Lumens 350 Lumens 35 Lumens 1,300 Lumens

3h 52h6h 15min ─

207m 110m 38m ─

10,740cd 3,020cd 360cd ─

1m (Impact Resistance)

IP68, 2m (Waterproof and Submersible)

Note: The stated data is measured in accordance with the international ashlight

testing standards ANSI/PLATO FL1-2019, using 1 x 18650 Li-ion battery (2,600mAh)

under laboratory conditions. The data may vary in real world use due to different

battery usage or environmental conditions.

Operating Instructions

Battery Installation

Insert the battery as

illustrated and screw to

tighten the tail cap.

Warnings:

1. Ensure the battery is

inserted with the positive

end towards the head.

The product will not work

if the battery is incorrectly

inserted.

2. CAUTION! Possible

dangerous radiation!

Don't look into the light!

May be dangerous for

your eyes.

3. When the power level is

low, please stop using

the product and replace

or recharge the battery to prevent damage to the battery.

4. When the product is kept in a backpack or left unused for prolonged time,

please remove the battery to prevent accidental activation or battery

leakage.

Tactical Momentary Illumination

Half press and hold the Power Button to turn on the light momentarily. Release to

turn it off.

On / Off

On: When the light is off, press the Power Button until a click sound is heard to turn

it on and access the MID Level.

Off: When the light is on, press the Power Button until a click sound is heard to turn

it off.

STROBE READY™ Button

Power Button

Power Indicators

Brightness Levels

When the light is on, half press the Power Button to cycle through the following

brightness levels: MID – LOW – HIGH.

Note: The T20 will automatically lower its output to avoid overheating and prolong

the lifespan of the battery when accessing the HIGH Level for over 1.5 minutes.

STROBE READY™

• When the light is on, press the STROBE READY™ Button to access the STROBE

Mode. When the STROBE Mode is on, press the STROBE READY™ Button again

to exit and return to the previous brightness level.

• When the light is off, press and hold the STROBE READY™ Button to access the

STROBE Mode. Release to turn it off.

Charging Function

The T20 is equipped with an

intelligent charging system. As

illustrated, after inserting the

battery and tightening the tail

cap, rotate the ashlight head

to uncover the USB charging

port and use the USB cable to

connect an external power supply

(e.g. a USB adapter or other USB

charging devices) to the charging

port to begin the charging process.

• During the charging process, the red charging indicator will be turned on

steadily to inform the user.

• When the battery is fully charged, the T20 will cease the charging process

and the charging indicator will turn green to inform the user.

• When the charging status is abnormal (e.g. the battery is broken/inserted

incorrectly), the T20 will cease the charging process and the red charging

indicator will ash to inform the user.

• The charging time for an 18650 Li-ion battery (2,600mAh) is approx. 2 hours

45 minutes. (Charged via the 5V/2A adapter)

Power Indication

When either button is pressed, the power indicators located on the tail cap will

be turned on to indicate the remaining power of the battery:

No. of Indicators On Power Level

All 4 Indicators Approx. 100%

3 Indicators Approx. 75%

2 Indicators Approx. 50%

1 Indicator Approx. 25% (Please recharge it as soon as possible.)

Changing Batteries

The batteries should be replaced when the output appears to be dim or the

ashlight becomes unresponsive due to low power.

Maintenance

Every 6 months, threads should be wiped with a clean cloth followed by a thin

coating of silicon-based lubricant.

Warranty Service

All NITECORE® products are warranted for quality. Any DOA / defective product

can be exchanged for a replacement through a local distributor/dealer

within 15 days of purchase. After that, all defective / malfunctioning NITECORE

products can be repaired free of charge within 60 months from the date of

purchase. Beyond 60 months, a limited warranty applies, covering the cost of

labor and maintenance, but not the cost of accessories or replacement parts.

The warranty will be nullied if

1. the product(s) is/are broken down, reconstructed and/or modied by

unauthorized parties;

2. the product(s) is/are damaged due to improper use; (e.g. reversed polarity

installation)

3. the product(s) is/are damaged due to battery leakage.

For the latest information on NITECORE®

products and services, please contact a

local NITECORE® distributor or send an email to service@nitecore.com

※ All images, text and statements specied herein this user manual are for

reference purpose only. Should any discrepancy occur between this manual

and information specied on www.nitecore.com, Sysmax Innovations Co., Ltd.

reserves the rights to interpret and amend the content of this document at

any time without prior notice.

Charging Indicator

Accessories

NITECORE 18650 Rechargeable Li-

ion Battery (NL1826 2,600mAh), USB

Charging Cable, Lanyard, Spare

O-ring, Holster

Thanks for purchasing NITECORE!

SYSMAX Innovations Co., Ltd.

TEL: +86-20-83862000

FAX: +86-20-83882723

E-mail: info@nitecore.com

Web: www.nitecore.com

Address: Unit 6355, 5/F,

No. 1021 Gaopu Road,

Tianhe District, Guangzhou,

510653, Guangdong, China

Please nd us on facebook: NITECORE Flashlight

T11072022

Made in China

Produkt Specifikationer

Mærke:	Nitecore
Kategori:	Lettelse
Model:	T20

Har du brug for hjælp?

Hvis du har brug for hjælp til Nitecore T20 stil et spørgsmål nedenfor, og andre brugere vil svare dig

Dit navn*

Din email*

Skriv dit spørgsmål her

Lettelse Nitecore Manualer

Nitecore NU27 Manual

1 Oktober 2024

Nitecore MT1A Pro Manual

1 Oktober 2024

Nitecore NPL25 Manual

1 September 2024

Nitecore EDC33 Manual

28 August 2024

Nitecore Bubble Manual

21 August 2024

20 August 2024

15 August 2024

11 August 2024

10 August 2024

10 August 2024

Lettelse Manualer

Nyeste Lettelse Manualer

Goobay 30780 Manual

15 Oktober 2024

Livarno IAN 94799 Manual

15 Oktober 2024

Astro Denia Manual

13 Oktober 2024

Brennenstuhl HARLON 2000 M Manual

8 Oktober 2024

Neewer SRP18C Manual

7 Oktober 2024

Crivit IAN 283689 Manual

7 Oktober 2024

BeamZ 150.590 Manual

5 Oktober 2024

BeamZ 150.780 Manual

5 Oktober 2024

BeamZ 150.371 IGNITE180 LED Spot Manual

5 Oktober 2024

BeamZ 151.341 BT430 PAR Manual

5 Oktober 2024